How to Setup Orbi in Bridge Mode | Step-by-step Guide

Are you unable to set up the Orbi bridge mode in the Orbi device? If yes is your answer, then there is no need to get upset. In this, you will get a brief guide on how to setup orbi in Bridge mode. Orbi is a WiFi system, that provides coverage, speed, and trustworthiness for homes. It is compatible with any internet service provider. Setting up Orbi into Orbi bridge mode is quite convenient. 

However, various users don’t know how to set up orbi in Bridge mode. If you belong to the same category and are exploring the Orbi bridge mode guide, then this is the last stop for all your searching. Setting up the Orbi bridge mode is not a tough task. However, if you find it challenging, then have a look at the following section. The below guide will help you in exploring Orbi bridge mode and also with the setup.

In this guide, we will walk through an easy-to-follow step-by-step guide on How to setup orbi in Bridge mode. Simply go through the following methods as given to set up the Orbi into Orbi bridge mode. 

What is Orbi Bridge Mode?

Orbi bridge mode is a setting in your router that turns off the WiFi broadcast of the router. Also, turn it into a bridge between the network and another WiFi router. It is a networking feature that allows two routers to coexist without any problems. Once the Orbi bridge mode is enabled on your router, the extended router creates a mesh network. This also allows you to connect to the network from a distance. However, it no longer performs network access translation processes. It also lets the router function properly without creating an IP address conflict. Connecting a router to the ISP-provided modem/router can boost the WiFi network coverage.

Steps to Setup the Orbi Bridge Mode

Before exploring Orbi bridge mode steps, note the WiFi settings of the primary router. Also, write down SSID, WiFi security mode, password, and operating frequency. Now follow the below steps to set up Orbi in Bridge Mode.

• On the device, open the browser that is connected to the router’s network.
• Then enter http://www.routerlogin.net in the given field and click on Enter. 
• After this, enter the username and password, on the login screen of the router. 
• Next, move to Settings and click the Advance Settings option. 
• Now choose Advance Setup and then the Wireless Bridge option. 
• After that, click on the Enable Bridge Mode checkbox and click on the Setup Bridge Mode Wireless Settings button.
• Then enter the settings of the other router, that you have noted down. 
• At last, click on Apply to complete the Orbi bridge mode. 

Instructions and Tricks for Orbi Bridge Mode

With some tips and tricks, you can make the most of Orbi Bridge mode. Below are the instructions and some tricks for the bridge mode.

• Make sure that the firmware of the router has been updated.
• Keep a single and same name of SSID details. 
• Orbi setup must be within the range of the main network. 
• To get rid of congested networks, adjust the WiFi frequency.
• Extend the guest network to your main network. 
• The security setting of the main network must be strong. 
• Regularly check for updates to keep the router maintained. 
• Also, make sure the connected device is compatible with your Orbi WiFi standards. 

What are the Advantages of Using Orbi Bridge Mode?

If you are one, who is looking to extend the range of the WiFi, then enabling the Orbi bridge mode is highly beneficial. It is mainly used by large-scale offices and commercial spaces where a single router is not a possible option. 

You will get a good reception when you are close to an ISP-provided WiFi router. However, as you move away, you start to lose signals to a point where the device is no longer connected to the WiFi network. 

It is an adequate resolution to this problem, as an Orbi Bridge Mode connection to further network and extends the range. Simply by connecting multiple routers to a single ISP provider, devices will get connected to the router and will not communicate with each other. It lets you connect multiple devices, extend the WiFi, provide faster speeds, and improve reliability.

What are the Disadvantages of Using Orbi Bridge Mode?

As with advantages, the Orbi bridge mode also has its disadvantages. The primary disadvantage of using it is that it limits some features available on the router. Bridge mode may disable valuable features. 

Valuable features such as parental control, MAC address filtering, and a few other things. However, it might not be possible, as some ISP-supplied routers lack it sometimes. If this is the issue, then you should have enabled it on the secondary router and connected all your devices there instead. 

When to Use Orbi Bridge Mode?

When you are trying to connect a second router to your network, then you should use the Orbi bridge mode. Also, when you are creating a mesh WiFi system for your network and when you want to avoid NAT (Network Access Translation) conflicts. 

If is not necessary for you to have to enable it in all instances. If your home or office WiFi works great with the sound WiFi coverage. It doesn’t annoy you with any sluggish speeds when you move further, so there is no reason.

Sum up

If you find exploring Orbi bridge mode steps a complicated task, then don’t get upset. Simply go through the above-provided steps for how to set up Orbi in Bridge mode. 

Hopefully, the above guide will help you to enable the Orbi bridge mode in the Orbi WiFi network device. If this doesn’t help you, then try to get in touch with Orbi experts. 

They will provide you with full assistance and also help you with the setup of the Orbi bridge mode. They are trained and have complete knowledge about the product and also Orbi Bridge Mode.