Sachiya Steel International offers a wide range of Inconel Alloy 625 Tube to Female Pipes, which has good strength / ductility properties from sub – zero temperatures to over 980 Degree C. Inconel 625 Tube Fittings in the soft annealed condition are characterized by good resistance to mineral acids such as nitric, phosphoric, hydrochloric and sulfuric acid. Inconel 625 Compression Fittings has excellent forming and welding characteristics, where hot forming should be performed within a temperature range of 1700 Degree F to 2150 Degree F.
Some applications requiring the combination of strength and corrosion resistance offered by Inconel 625 Female Connector Fittings are bubble caps, reaction vessels, tubing, distillation columns, transfer piping, valves and heat exchangers. Inconel 625 Ferrule Fittings is produced by vacuum induction melting or by AOD refining, where niobium stabilizes the alloy contrary to sensitization in the course of welding. Inconel 625 Double Ferrule Fittings is often used for Air Pollution Control, such as in chimney liners, flue gas desulfurization (FGD) components, dampers, etc. Inconel 625 Compression Tube Fittings is also used in oil and gas production where hydrogen sulfide and elementary sulfur exist at temperature in excess of 150 Degree C.
Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes | Inconel Alloy 625 Tube to Female Pipes
Inconel 625 Tube Fittings is a nickel – chromium alloy used for its high strength, outstanding corrosion resistance and excellent fabricability. Alloy 625 Compression Fittings is not only nickel based super alloy, but also Non – Magnetic and Corrosion resistant in nature.
|
Inconel 625 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 6250 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Grade | C | Mn | Si | Fe | S | Cr2 | Al-Ti | Ni | |
| 625 | min. | – | – | – | – | – | 20.0 | – | 58.0 |
| max. | 0.10 | 0.50 | 0.50 | 5.0 | 0.015 | 23.0 | 0.40 | – | |
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 625 | Psi – 1,35,000 , MPa -930 | Psi – 75,000 , MPa – 517 | 42.5 | – | – |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 625 | N06625 | NA 21 | NiCr22Mo9Nb | 2.4856 | NC22DNB4M | ХН75МБТЮ | NCF 625 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 625 Tube to Male Fittings, which provides excellent corrosion resistance in a wide variety of severe corrosive environments due to its high alloy content.
These Inconel 625 Tube Fittings in the soft annealed condition are characterized by immunity to chloride – induced stress corrosion cracking.
Because the alloy is developed to retain high strength at elevated temperatures, our Inconel 625 Compression Fittings resists deformation at hot-working temperatures and higher loads are required to cause the material to deform.Product and technology applications of these Inconel 625 Male Connector Fittings include: Chemical process equipment, Engine thrust – reverser systems, Specialized seawater equipment, Turbine shroud rings, and Jet engine exhausts systems.
Its high strength enables our Inconel 625 Ferrule Fittings to be used, for example, in thinner – walled vessels or tubing than possible by means of other materials, thus improving heat transfer and saving weight.
These Inconel 625 Double Ferrule Fittings is resistant to inter – granular corrosion even in the welded condition, where pitting and crevice corrosion are prevented by molybdenum.Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male FittingsOur Inconel 625 Compression Tube Fittings is often used for Aerospace Components, such as in bellows and expansion joints, jet engine exhaust systems, ducting systems, engine thrust – reversers and turbine shroud rings.
These Alloy 625 Tube Fittings is as well used in components where exposure to sea water and high mechanical stresses are required.Inconel 625 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for BrassInconel Alloy 625 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6250.10 max0.50 max0.50 max0.015max–5.0 max58.0 min20.0 – 23.0Inconel 625 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6258.4 g/cm31350 °C (2460 °F)Psi – 1,35,000 , MPa – 930Psi – 75,000 , MPa – 51742.5 %Equivalent Grades for 625 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6252.4856N06625NCF 625NA 21ХН75МБТЮNC22DNB4MNiCr22Mo9NbNiCr23FeAlloy 625 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 625 Tube to Male Fittings, which provides excellent corrosion resistance in a wide variety of severe corrosive environments due to its high alloy content.
These Inconel 625 Tube Fittings in the soft annealed condition are characterized by immunity to chloride – induced stress corrosion cracking.
Because the alloy is developed to retain high strength at elevated temperatures, our Inconel 625 Compression Fittings resists deformation at hot-working temperatures and higher loads are required to cause the material to deform.Product and technology applications of these Inconel 625 Male Connector Fittings include: Chemical process equipment, Engine thrust – reverser systems, Specialized seawater equipment, Turbine shroud rings, and Jet engine exhausts systems.
Its high strength enables our Inconel 625 Ferrule Fittings to be used, for example, in thinner – walled vessels or tubing than possible by means of other materials, thus improving heat transfer and saving weight.These Inconel 625 Double Ferrule Fittings is resistant to inter – granular corrosion even in the welded condition, where pitting and crevice corrosion are prevented by molybdenum.
Our Inconel 625 Compression Tube Fittings is often used for Aerospace Components, such as in bellows and expansion joints, jet engine exhaust systems, ducting systems, engine thrust – reversers and turbine shroud rings.
These Alloy 625 Tube Fittings is as well used in components where exposure to sea water and high mechanical stresses are required.Inconel 625 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for Brass Inconel Alloy 625 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiCrInconel 6250.10 max0.50 max0.50 max0.015max–5.0 max58.0 min20.0 – 23.0 Inconel 625 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6258.4 g/cm31350 °C (2460 °F)Psi – 1,35,000 , MPa – 930Psi – 75,000 , MPa – 51742.5 % Equivalent Grades for 625 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6252.4856N06625NCF 625NA 21ХН75МБТЮNC22DNB4MNiCr22Mo9NbNiCr23Fe Alloy 625 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is leading manufacturer and exporter of Inconel 625 Tube to Union Fittings, which is equipped with sophisticated techniques and machines.
Inconel 625 Tube Fittings has excellent weldability, excellent fatigue strength and stress – corrosion cracking resistance to chloride ions.
The outstanding strength and toughness of Inconel 625 Ferrule Fittings in the temperature range cryogenic to 2000 Degree F (1093 Degree C) are derived primarily from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel – chromium matrix.
Inconel 625 Double Ferrule Fittings, which is one of the most corrosion – resistant steels in the world, also demonstrates remarkable protection against corrosion and oxidation.Inconel 625 Compression Tube Fittings are often used in pollution -control equipment, and nuclear reactors.
Meanwhile, these Alloy 625 Tube Fittings are also being offered in different sizes and shapes to our customers.
In the annealed condition, Alloy 625 Ferrule Fittings is fully austenitic and is suitable for machining, and can be formed using various cold and hot working processes.Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union Fittings | Inconel 625 Tube to Union FittingsAlloy 625 Double Ferrule Fittings in the soft annealed condition is characterized by exceptional resistance to pitting, crevice corrosion, erosion, and inter – granular corrosion.
Sachiya Steel International deals in an all-embracing range of Inconel Alloy 718 Tube to Female Pipes, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered.After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification.
Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming.
Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc.Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female PipesThese Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics.
Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts.
We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.Inconel 718 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 7180 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
