Sachiya Steel International offers an extensive array of Incoloy 330 Tube to Female Pipes to the clients, which has a low coefficient of expansion, excellent ductility, and high strength. In fact, the work hardening rate of Inconel 330 Tube Fittings is similar to that of stainless steel 305. Inconel 330 Compression Fittings performs well under cyclic conditions of heating and cooling and in alternate carburizing and oxidizing atmospheres. Due to its relatively high strength and work hardening rate, Inconel 330 Female Connector Fittings is more difficult to cold form than standard 18 – 8 stainless steels.
In general, nickel alloys except alloy 600 outperform Ra 330 Female Connector Fittings in creep strength, which are further often encountered in extreme environments. SS 330 Female Connector Fittings is often used in Off – Shore Oil Drilling Companies, Petrochemicals, Power Generation and more. Carburization and oxidation resistance of Ra 330 Tube Fittings to 2100 Degree F (1148 Degree C) are enhanced by a nominal 1.25 % silicon addition.
Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes
SS 330 Tube Fittings are also used in the following applications: Furnaces, muffles, retorts and conveyor systems; Industrial heating; Heat treating baskets and fixtures. Ra 330 Compression Fittings have resistant to thermal shock, good strength at elevated temperature, and also chloride ion stress corrosion cracking resistance. SS 330 Compression Fittings is also used for everything from resistors, mechanical components, springs and heating applications.
|
Incoloy 330/ SS 330/ Ra 330 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating | : | 3000 – 330/ SS 330/Ra 3300 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Grade | C | Mn | Si | P | S | Cr | Cu | N | |
| 330 | min. | – | – | 0.75 | – | – | 17.0 | – | 34.0 |
| max. | 0.08 | 2.0 | 1.50 | 0.030 | – | 20.0 | – | 37.0 | |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Incoloy 330 | N08330 | – | – | 1.4886 | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For more details:
E-Mail: [email protected]
Phone: +91 9769056007
Web: https://steeltube.co.in/
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels.
The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres.
The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F. Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc.In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316.
SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures.
Ra 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.
Ra 330 Tube Fittings has oxidation resistance to 2100 Degree F and resistant to carburization and nitriding.Incoloy 330/SS 330/Ra 330 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Incoloy, 300/1000/3000PSI for Brass Incoloy Alloy 330/SS 330/Ra 330 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiCrSnPb3300.08 max2.00 max0.75-1.500.03 max1.00 maxBalance34.0-37.017.0-20.00.0250.005 max Equivalent Grades for 330/SS 330/Ra 330 Incoloy Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSIncoloy 3301.4886N08330 Alloy 330/SS 330/Ra 330 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer of Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels.
The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres.
The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F.Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc.
In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316.
SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures.Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male FittingsRa 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.
Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.
Sachiya Steel International is one of the prominent Manufacture & exporter in Incoloy Alloy 20 Tube to Female Pipes, which is commercially pure (99.6 %) wrought nickel.
Alloy 20 Tube Fittings is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Alloy 20 Compression Fittings can suffer from graphitization which can result in severely compromised properties.
All hot working and cold working practices can be utilized when shaping Alloy 20 Female Connector Fittings.
Hot working temperatures for Alloy 20 Ferrule Fittings should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F.Annealing of Alloy 20 Double Ferrule Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature for Carpenter 20 Compression Tube Fittings can greatly influence the mechanical properties and structure of the material.
When operating temperatures are expected to exceed 600 Degree F, carbon content in Carpenter 20 Female Connector Fittings becomes critical.Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female PipesThe lower carbon content of Carpenter 20 Tube Fittings makes the material resistant to graphitization and therefore less subject to embrittlement.
Carpenter 20 Compression Fittings is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1.
Sachiya Steel International Is a Leading Manufacture And Exporter of Incoloy 330 Threaded Forged Fittings to the clients, where we assure our clients that a quality array is delivered from our end.
Incoloy 330 Forged Threaded Elbow (UNS N08330) is extensively used in high temperature environments where resistance to the combine effects of thermal cycling and carburization is necessary.
The oxidation resistance of Incoloy 330 Forged Threaded Tee is enhanced by the silicon content.
Incoloy 330 Forged Threaded Cross was designed for applications in high temperature industrial environments where good resistance to the combined effects of carburization and thermal cycling are required, such as the heat treat industry.
Meanwhile, these Incoloy 330 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
Forged parts of Incoloy 330 Forged Threaded Fittings should be cooled as quickly as possible, and for best corrosion resistance post – forge annealing is recommended.Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged FittingsThe main reason being we have an excellent warehousing and storage facilities for both finished and semi – finished Incoloy 330 Forged Threaded Coupling in the heart of financial capital of the country, where they are further made ready as per the urgent requirements of the customers.
Sachiya Steel International offers an extensive array of Incoloy 330 Threaded Forged Fittings to the clients, where we assure our clients that a quality array is delivered from our end.
Incoloy 330 Forged Threaded Elbow (UNS N08330) is extensively used in high temperature environments where resistance to the combine effects of thermal cycling and carburization is necessary.
The oxidation resistance of Incoloy 330 Forged Threaded Tee is enhanced by the silicon content.
Incoloy 330 Forged Threaded Cross was designed for applications in high temperature industrial environments where good resistance to the combined effects of carburization and thermal cycling are required, such as the heat treat industry.
Meanwhile, these Incoloy 330 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
Forged parts of Incoloy 330 Forged Threaded Fittings should be cooled as quickly as possible, and for best corrosion resistance post – forge annealing is recommended.Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged FittingsThe main reason being we have an excellent warehousing and storage facilities for both finished and semi – finished Incoloy 330 Forged Threaded Coupling in the heart of financial capital of the country, where they are further made ready as per the urgent requirements of the customers.
