logo
logo
AI Products 

Stainless Steel 410 Tube to Female Pipes Manufacture

avatar
steel tube
Stainless Steel 410 Tube to Female Pipes Manufacture

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 410 Tube to Female Pipes, which is the higher carbon version of the alloy. These Stainless Steel 410 Tube Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of Stainless Steel 410 Compression Fittings enables dual certification. These Stainless Steel 410 Female Connector Fittings cannot be hardened by heat treatment, only by cold working.

Stainless Steel 410 Ferrule Fittings can be easily welded and processed by standard shop fabrication practices. These Stainless Steel 410 Double Ferrule Fittings can be used in nitric solutions and also in most diluted organic acids at moderate temperatures. SS 410 Tube Fittings used in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures. These SS 410 Compression Fittings resists polyphonic acid stress corrosion cracking in hydrocarbon service.

Stainless Steel 410 Tube to Female Pipes | Stainless Steel 410 Tube to Female Pipes | Stainless Steel 410 Tube to Female Pipes | Stainless Steel 410 Tube to Female Pipes | Stainless Steel 410 Tube to Female Pipes | Stainless Steel 410 Tube to Female Pipes | Stainless Steel 410 Tube to Female Pipes

SS 410 Female Connector Fittings can also be utilized in chloride or fluoride free caustic solutions at moderate temperatures. These SS 410 Ferrule Fittings does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. The high Sulphur content of SS 410 Double Ferrule Fittings also has a detrimental impact on hot workability. If hot forming is required, once again, these SS 410 Compression Tube Fittings should be considered as an alternate selection.

Stainless Steel 410 Tube to Female Pipes Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

 

410 Stainless Steel Tube to Female Pipes Fitting Chemical Composition

 

Grade C Mn Si P S Cr Mo Ni N
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75

 

Stainless Steel 410 Tube to Female Pipes Fitting Mechanical Properties

 

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201

 

Stainless Steel 410 Tube to Female Pipes Fitting Physical Properties

 

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
410 7750 200 9.9 11.4 11.6 24.9 28.7 460 570

 

Equivalent Grades for 410 Stainless Steel Tube to Female Pipes Fitting

 

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410

 

SS 410 Tube to Female Pipes Application Industries

 

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

For more details:

E-Mail: [email protected]
Phone: +91 9769056007
Web: https://steeltube.co.in/

collect
0
avatar
steel tube
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more