Sign in

Repairs and Installation of Pumps

shane jo
Repairs and Installation of Pumps

Repairs and Installation of Pumps and Filters for Swimming Pools(Swimming pool pump repairs)

Repairs and Installation of Pumps and Filters for Swimming Pools
For the quality of your pool, Ponto D`agua Piscinas has a specialized team that changes the sand in your pool filter.

increase your filter efficiency and make your pool cleaner and healthier.

Did you know that filter sand must be changed every year?

Over time, the filter's dirt-holding capacity decreases, as the sand becomes hardened.

Therefore, to maintain your pool with quality, it is important to change the filter sand every 1 or 2 years.

– Frequently asked questions about the filter.

1- When should I change the sand in the Filter?

R= Sand level and quality should be checked annually. The quality of the sand directly influences the quality of the water. See Ponto D`Água Piscinas.

2 – What is the clock on the filter head for?

R= The Clock is called a manometer and serves to check the water pressure. See the filter manual.

3 – Am I noticing sand at the bottom of the pool?

R= Be careful not to confuse sand with flocculant powder. This lifts easily, the sand you can catch. It is very important to assess this situation. In case you return to the sand, you will have to contact us at Ponto D`água Piscinas. In the case of flocculant, it must be aspirated in the drain function, as many times as necessary to eliminate all the fine dirt.

4 – What is the Pre-Filter for?

R= Serves to retain larger dirt, preventing the passage of this dirt to the head or filter sand. It is located before the pump. It is important to keep it clean, otherwise the filter pressure will decrease. https://aquamechservices.com.au/pump-repairs/

shane jo
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more