Sachiya Steel International offers a wide range of Inconel 600 Wire, which are normally preferred for handling concentrated and high temperature caustic. Its high nickel content, a minimum of Ni 72 %, combined with its chromium content, provides users of Inconel 600 Wire a number of benefits. In strong oxidizing solutions like hot, concentrated nitric acid, Inconel 600 Coil Wires has poor resistance. The high chromium content of Inconel 600 Wire raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.
Inconel 600 Wire can both hot formed and cold form using typical processes, and is also often used in vegetable and fatty acid vessels. Inconel 600 Wires is also used for furnace components, in food and chemical processing, nuclear engineering, and sparking electrodes. Chromium content in Alloy 600 Coiled Wire confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.
The high nickel content in Alloy 600 Coil Wire enables it to retain considerable resistance under reducing conditions. Alloy 600 Wire is a nickel – chromium alloy with good oxidation resistance at high temperatures and resistance to chloride – ion stress – corrosion cracking, corrosion by high – purity water, and caustic corrosion. Alloy 600 Wire has exceptional Temperature Resistance and Corrosion Resistance as its excellent properties.
|
Inconel 600 Wire Specifications
|
||
| Specifications | : | ASTM B166 ASME SB166 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.50 max | 0.015max | 14.00 – 17.00 | 6.00 – 10.00 | 72.00 min | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International offers a wide range of Inconel 600 Angle, which has high strength properties, worthy workability and good weldability.
Age – hardening treatments are not required, as Inconel 600 Angle is hardened and strengthened through cold work only.
Inconel 600 C-Channel is highly resistant to chloride – ion stress – corrosion cracking due to the high nickel content, where low sulfur plummeting furnace environments should be utilized in forging.
Inconel 600 H-Beam is resistant to a wide range of corrosive media and has developed into a wide spectrum of applications for high temperature strength and corrosion resistance.For heavy hot work in Inconel 600 I-Beam, the range should be in between 1900 Degree F and 2250 Degree F (1040 Degree C and 1230 Degree C); light work can be done to 1600 Degree F (870 Degree C).
Inconel 600 T-Beam is a superior choice for gas turbine components including jet engines, titanium dioxide plants and chlorination equipment to 1000 Degree F.The chromium content of Inconel 600 Chain gives better resistance than Nickel 200 and Nickel 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.
Fine grain Alloy 600 Angle typically has better corrosion resistance as well as fatigue, impact and higher tensile properties.
Sachiya Steel International offers a wide range of Inconel 601 Wire, which develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling.
Other applications of our Inconel 601 Wires include thermocouple protection tubes, condenser tubes, process heaters, and so on.
This Inconel 601 Wire is best forged, for large deformations, between 2250 Degree F and 1900 Degree F, but forging may be continued to 1650 Degree F. Due to high chromium and some aluminum content in our Inconel 601 Coil Wire, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.This Inconel 601 Electrode is often used in Chemical Processing, Heat treating industry, Aerospace, Power generation and so on.
Our Inconel 601 Wire is a standard material of construction for various types of thermal – processing equipment.
This Inconel 601 Wire has good creep rupture strength, along with readily joined by conventional welding products and processes.
Our Alloy 601 Wire can be machined using conventional machining methods which are used for iron – based alloys.This Alloy 601 Coil Wire is not suggested for use in strongly reducing and sulfur bearing environments.
Sachiya Steel International offers a wide range of Inconel 600 Threaded Forged Fittings, where customers can purchase the same at industry leading prices.
Our Inconel 600 Forged Threaded Elbow (UNS N06600) are used for furnace components, in chemical and food processing, etc.
These Inconel 600 Forged Threaded Tee display freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
The high nickel content in our Inconel 600 Forged Threaded Cross enables it to retain considerable resistance under reducing conditions.These Inconel 600 Forged Threaded Cap is also often used in high temperature static applications.
Inconel 600 Elbow Forged Fittings shows high levels of atmospheric corrosion.
Our Inconel 600 Forged Threaded Fittings cannot be hardened by heat treating and also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
Sachiya Steel International offers a wide range of Inconel 600 Threaded Forged Fittings, where customers can purchase the same at industry leading prices.
Our Inconel 600 Forged Threaded Elbow (UNS N06600) are used for furnace components, in chemical and food processing, etc.
These Inconel 600 Forged Threaded Tee display freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
The high nickel content in our Inconel 600 Forged Threaded Cross enables it to retain considerable resistance under reducing conditions.
These Inconel 600 Forged Threaded Cap is also often used in high temperature static applications.Inconel 600 Elbow Forged Fittings shows high levels of atmospheric corrosion.
Our Inconel 600 Forged Threaded Fittings cannot be hardened by heat treating and also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
