logo
logo
Sign in

Titanium Gr 5 Angle Manufacture

avatar
sheet plates
Titanium Gr 5 Angle Manufacture

Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 5 Angle And Other Titanium Products, which can be machined using slow speeds and high feed rates. Design of experimental technique in Titanium Grade 5 Angle, that is, response surface methodology (RSM), has been used to accomplish the objective of the experimental study. Wrought Titanium Grade 5 C-Channel is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required. Titanium Grade 5 Chain is the most widely used titanium alloy of the alpha – plus – beta class, and is also the most common of all titanium alloys.

We export a wide assortment of Titanium Grade 5 I-Beam that is suitable for applications like static and rotating gas turbine engine components. The addition of 0.05 % palladium, 0.1 % ruthenium or 0.05 % palladium and 0.5 % nickel in Titanium Grade 5 H-Beam significantly increases corrosion resistance in reducing acid chloride and sour environments, raising the threshold temperature to well over 200 Degree C.

Titanium Gr 5 Angle | Titanium Gr 5 Angle | Titanium Gr 5 Angle | Titanium Gr 5 Angle | Titanium Gr 5 Angle | Titanium Gr 5 Angle | Titanium Gr 5 Angle | Titanium Gr 5 Angle

Titanium Grade 5 T-Beam is an alloyed titanium product containing 6 % Aluminum and 4 % Vanadium, and also has ELI (Extra Low Interstitial). Grade 5 Titanium Angle can be used in biomedical applications such as implantable components due to its biocompatibility, good fatigue strength and low modulus. Grade 5 Titanium Chain is produced by primary melting using vacuum arc (VAR), electron beam (EB), or plasma arc hearth melting (PAM).

 

Titanium Grade 5 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM B348 / ASME B348
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
Titanium Gr 5 Angle
: 5mm to 9mm
Titanium Gr 5 Channel
: 40mm*20mm~300mm*300mm
Titanium Gr 5 Beam : 3″ thru 12.31″
Titanium Gr 5 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

 

Grade 5 Titanium Angle, Channel, Beam, Chain Chemical Composition

Grade C Al V O Ti Fe
Titanium Grade 5 6 min 4 min 0.02 max 90 min 0.25 max

Titanium Gr 2 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Grade 5 Titanium Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS
Titanium Grade 5 3.7165 R56400

 

Titanium Grade 5 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
collect
0
avatar
sheet plates
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more