Sachiya Steel International is leading manufacturer and exporter of Incoloy 825 Tube to Union Fittings, which are made by using quality material. Incoloy 825 Tube Fittings (UNS N08825) is used in temperatures up to 1020 Degrees F. Chemical composition of Incoloy 825 Compression Fittings provides great resistance to a lot of corrosive environments, such as pitting, crevice corrosion, inter – granular corrosion, and stress- corrosion cracking. The levels of molybdenum and copper enable Incoloy 825 Ferrule Fittings to resist reducing agents and acids.
Heavy duty machining equipment and tooling should be used in Incoloy 825 Double Ferrule Fittings to minimize chatter or work – hardening of the alloy ahead of the cutting. Meanwhile, these Incoloy 825 Compression Tube Fittings are also being offered in different sizes and shapes to our customers. Alloy 825 Tube Fittings does work – harden during machining and has higher strength and “gumminess” not typical of steels. The hot- working range for Alloy 825 Compression Fittings is 1600 Degree F to 2150 Degree F.
Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings |Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings
Alloy 825 Ferrule Fittings is used for chemical processing, pollution – control equipment, nuclear fuel reprocessing, oil and gas well piping, acid production, pickling equipment and more. Alloy 825 Double Ferrule Fittings has the pressure vessel authenticate when manufacture temperature up to 450 Degree C. Substantial duty emollients in Alloy 825 Compression Tube Fittings have to be utilized to lessen down the exasperating in all materializing processes.
Incoloy 825 Tube to Union Specifications |
||
Specifications | : | ASTM B366 / ASME SB366 |
Size | : | 1/16” to 2″ inch |
Thread | : | NPT, BSP, BSPT, IMPRIAL UNF, ISO, SAE, etc. |
Pressure Rating |
: | 3000 – 8250 PSI |
PTFE Standards | : | ASTM 3294, ASTM D1710 |
Applicable temperature | : | 150-400°C |
Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Incoloy 825 Tube To Union Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Incoloy 825 Tube To Union Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for 825 Incoloy Ferrule Fitting Tube To Union
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy Alloy 825 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Pipe Fittings