Sachiya Steel International is one of the Leading Manufacturer And Exporter of Duplex S31803 Tube to Union Fittings, where our quality controllers inspect these products on certain parameters to rule out every possibility of defect. Our Duplex Steel S31803 Compression Tube Fittings resists sulfide stress corrosion and chloride environments. These Duplex Steel S32205 Compression Tube Fittings are often used in Oil and Gas Industry: such as in Pumps, Valves, Pipe, Vessels, Wellhead Equipment, Subsea Equipment, Separators, Heat Exchangers, etc. Our Duplex Steel S31803 Tube Fittings has better localized corrosion resistance than Type 316L and Type 317L, and the steel is applied in the industrial fields such as chemical plant, seawater desalination plant, seawater pump, and so on.
Meanwhile, these Duplex Steel S32205 Tube Fittings are as well being offered in different sizes and shapes to our customers. These Duplex Steel S31803 Union Fittings is readily weldable using many of the standard electric arc welding processes but oxyacetylene welding is not recommended because carbon pickup in the weld metal may occur.
Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings | Duplex S31803 Tube to Union Fittings
The advantage of our Duplex Steel S32205 Union Fittings is that it combines the favorable qualities of a ferritic alloy (stress corrosion cracking resistance and high strength) with those of an austenitic alloy (ease of fabrication and corrosion resistance). Sachiya Steel International is one of the prominent trader and dealer of these Duplex Steel S31803 Ferrule Fittings, which is suitable for cold forming.
Duplex Steel S31803 / S32205 Tube to Union Specifications |
||
| Specifications | : | ASTM A182 / ASME SA182 |
| Tube Fittings SIZE | : | 1/16”OD to 2”OD, 2mm OD to 50mm OD |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
| Brass | : | ASTM B16 ASTM B 453 |
| Standards | : | ASTM D1710, ASTM D3294 |
| Applicable Temperature | : | 150-400°C |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Duplex Steel S31803 / S32205 Tube To Union Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
| S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Duplex Steel S31803 / S32205 Tube To Union Mechanical Properties
| Grades | Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
| S31803 / S32205 | 7.805 | 0.285 | 1420 – 1465 | 2588 – 2669 |
Equivalent Grades for S31803 / S32205 Duplex Steel Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex 2205 | 1.4462 | S31803 / S32205 |
Duplex Steel S31803 / S32205 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Pipe Fittings
Sachiya Steel International is one of the leading Manufacturer and Exporter of Duplex Steel S31803 Tube to Male Fittings, which has some exceptional features to offer such as fine finish, high tensile potency, rust – resistant, etc.
These Duplex Steel S31803 Tube Fittings demonstrates exceptional fatigue potency, in addition to exceptional resistance to stress corrosion cracking, crevice, erosion, general corrosion and pitting in severe atmospheres.
The construction of our Duplex Steel S32205 Compression Fittings contains of austenite pools enclosed by an incessant ferrite stage.
These Duplex Steel S31803 Ferrule Fittings is about twice over the yield potency of customary austenitic stainless steel grades.Our Duplex Steel S32205 Double Ferrule Fittings soaring temperature power is parallel to SS 430 in the array of 950 Deg C to 1150 Deg C. Meanwhile, these Duplex Steel S31803 Male Connector Fittings are also being offered in different sizes and shapes to our customers.
Due to the possibility that other undesired metallic phases could arise in our Duplex Steel S32205 Male Connector Fittings, so further cooling down to 300 Degree C should be undertaken as quickly as possible.These Duplex Steel S31803 Double Ferrule Tube Fittings can be welded according to the processes generally used for highly alloyed steels, i.e.
the following procedures or combinations can always be used: submerged arc welding, TIG process, plasma welding, metal – active gas process, laser beam welding, and electron beam welding.Duplex Steel S31803 / S32205 Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Duplex Steel , 300/1000/3000PSI for Brass Duplex S31803 / S32205 Tube To Male Fittings Chemical Composition GradeCMnSiPSCrMoNiNFeS318030.030 max2.00 max1.00 max0.030 max0.020 max22.0 – 23.03.0 – 3.54.50 – 6.500.14 – 0.2063.72 minS322050.030 max2.00 max1.00 max0.030 max0.020 max21.0 – 23.02.50 – 3.504.50 – 6.500.8 – 0.2063.54 min Duplex Steel S31803 / S32205 Tube To Male Fittings Mechanical PropertiesGradesDensity (g/cm 3)Density (lb/in 3)Melting Point (°C)Melting Point (°F)S31803 / S322057.8050.2851420 – 14652588 – 2669 Equivalent Grades for S31803 / S32205 Duplex Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSDuplex 22051.4462S31803 / S32205 Duplex S31803 / S32205 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one if the leading Manufacturer and Exporter of Duplex Steel S31803 Tube to Male Fittings, which has some exceptional features to offer such as fine finish, high tensile potency, rust – resistant, etc.
These Duplex Steel S31803 Tube Fittings demonstrates exceptional fatigue potency, in addition to exceptional resistance to stress corrosion cracking, crevice, erosion, general corrosion and pitting in severe atmospheres.
The construction of our Duplex Steel S32205 Compression Fittings contains of austenite pools enclosed by an incessant ferrite stage.
These Duplex Steel S31803 Ferrule Fittings is about twice over the yield potency of customary austenitic stainless steel grades.Our Duplex Steel S32205 Double Ferrule Fittings soaring temperature power is parallel to SS 430 in the array of 950 Deg C to 1150 Deg C. Meanwhile, these Duplex Steel S31803 Male Connector Fittings are also being offered in different sizes and shapes to our customers.
Due to the possibility that other undesired metallic phases could arise in our Duplex Steel S32205 Male Connector Fittings, so further cooling down to 300 Degree C should be undertaken as quickly as possible.Duplex Steel S31803 Tube to Male Fittings | Duplex Steel S31803 Tube to Male Fittings | Duplex Steel S31803 Tube to Male Fittings | Duplex Steel S31803 Tube to Male Fittings | Duplex Steel S31803 Tube to Male Fittings | Duplex Steel S31803 Tube to Male Fittings | Duplex Steel S31803 Tube to Male Fittings | Duplex Steel S31803 Tube to Male FittingsThese Duplex Steel S31803 Double Ferrule Tube Fittings can be welded according to the processes generally used for highly alloyed steels, i.e.
the following procedures or combinations can always be used: submerged arc welding, TIG process, plasma welding, metal – active gas process, laser beam welding, and electron beam welding.Duplex Steel S31803 / S32205 Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Duplex Steel , 300/1000/3000PSI for BrassDuplex S31803 / S32205 Tube To Male Fittings Chemical CompositionGradeCMnSiPSCrMoNiNFeS318030.030 max2.00 max1.00 max0.030 max0.020 max22.0 – 23.03.0 – 3.54.50 – 6.500.14 – 0.2063.72 minS322050.030 max2.00 max1.00 max0.030 max0.020 max21.0 – 23.02.50 – 3.504.50 – 6.500.8 – 0.2063.54 minDuplex Steel S31803 / S32205 Tube To Male Fittings Mechanical PropertiesGradesDensity (g/cm 3)Density (lb/in 3)Melting Point (°C)Melting Point (°F)S31803 / S322057.8050.2851420 – 14652588 – 2669Equivalent Grades for S31803 / S32205 Duplex Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSDuplex 22051.4462S31803 / S32205Duplex S31803 / S32205 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International offers an extensive range of Duplex S31803 Round Bar, which has some outstanding features to offer such as rust free, superior tensile strength, wear & tear resilient, and so on.
Our Duplex Steel S31803 Round Bars is a ferritic and austenitic stainless steel that has higher corrosion resistance and elevated potency.
These Duplex Steel S32205 Round Bars combines better-quality resistance to SCC, pitting, high strength and crevice corrosion in comparison by means of other stainless steel grades.Our Duplex Steel S31803 Square Bars is nitrogen improved steel that was industrialized to fight common corrosion issues come across by means of the 300 series stainless steels.
These Duplex Steel S32205 Flat Bars is ferritic, two – phase, austenitic 3 percent molybdenum, 22 percent chromium, and 5 percent – 6 percent nickel – alloyed stainless steel.Duplex S31803 Round Bar | Duplex S31803 Round Bar | Duplex S31803 Round Bar | Duplex S31803 Round Bar | Duplex S31803 Round Bar | Duplex S31803 Round BarMeanwhile, these Duplex Steel S31803 Threaded Bars are also being offered in different sizes and shapes to our customers.
The corrosive environment of these Duplex Steel S32205 Hollow Bars may significantly reduce the effective fatigue strength of steel.
When hot forming is required, the work – piece of our Duplex Steel S31803 Hexagonal Bars should be heated uniformly and worked in the range of 1750 Degree F – 2250 Degree F. These Duplex Steel S32205 Triangular Bars is quite soft at these temperatures and is readily formed, where above this range it is subject to hot tearing.
