Sachiya Steel International is one of the leading Manufacturer and Exporter of Cupro Nickel 90 Tube to Union Fittings, where our offered range is ensured to be in compliance with the international quality standards. Cu-Ni 90 / 10 Tube Fittings (UNS C70600) exhibits superior corrosion resistance in seawater. An addition of iron in Cupro Nickel 90 / 10 Compression Fittings was made to increase its resistance to general corrosion, erosion and impingement corrosion resulting from the turbulent flow of water containing air bubbles and silt flowing at a high velocity. The main, wrought Copper Nickel 90 / 10 Ferrule Fittings chosen for sea water service contain 10 or 30 percent nickel.
Meanwhile, Cu-Ni 90 / 10 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers. For the sake of accuracy, Cupro Nickel 90 / 10 Union Tube Fittings is presented in bold type in the units in which it was originally published with the lighter type equivalents in corresponding units. The addition of manganese, niobium, iron and or chromium in Cu-Ni 90 / 10 Union Tube Fittings improves their corrosion resistance and strength.
Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings
Cu-Ni 90 / 10 Compression Tube Fittings is often used in MARINE, such as for Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, and Water Hoses.
Cupro Nickel 90/10 Tube to Union Specifications |
||
| Specification | : | ASTM B122 / ASME SB122 |
| Size Range | : | 1/16”OD to 2”OD, 2mm OD to 50mm OD |
| Thread | : | NPT , BSPT, BSPP |
| End | : | Threaded, Welding, JIC |
| Pressure Rating | : | 3000 & 6000 |
| Type | : | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting |
Cupro-Nickel 90/10 Tube To Union Chemical Composition
| Grade | Cu | Mn | Pb | Ni | Fe | Zn |
| Cupro Nickel 90/10 | 88.6 min | 1.0 max | 0.05 max | 9-11 max | 1.8 max | 1 max |
Copper Nickel Alloy 90/10 Tube To Union Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Equivalent Grades for 90/10 Copper Nickel Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS |
| Cupro Nickel 90/10 | 2.0872 | C70600 |
Cupro-Nickel 90/10 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Pipe Fittings
Sachiya Steel International is a known manufacturer of Cupro Nickel 90 Tube to Female Pipes, which is relatively insensitive to stress corrosion.
Because of this, Cu-Ni 90 / 10 Tube Fittings is used for marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats.
Small amounts of iron and manganese in these Cupro Nickel 90 / 10 Compression Fittings are added to improve corrosion resistance in high – velocity waters, including seawater.Copper Nickel 90 / 10 Female Connector Fittings is often used in condensers, condenser plates, distiller tubes, evaporator and heat exchanger tubes, salt water piping, and ferrules.
In spite of the appropriate properties of these Cu-Ni 90 / 10 Ferrule Fittings, instances of failure have been experienced in practice.
Benefit of Cupro Nickel 90 / 10 Double Ferrule Fittings is its high resistance to befouling: in recent years this has led to sheathing developments particularly for structures and boat hulls.These Copper Nickel 90 / 10 Compression Tube Fittings are a copper-nickel alloy with low resistivity suitable for use at temperatures up to 300 Degree C (570 Degree F).
Cu-Ni 90 / 10 Female Connector Tube Fittings prevents stress corrosion cracking and pitting and crevice corrosion.
Sachiya Steel International is Leading Manufacturer And Exporter of Cupro Nickel 90 Tube to Male Fittings, where we are made these for utilizing superb raw materials.
Typically, Cu-Ni 90 / 10 Tube Fittings is used as sea water condenser systems and desalination plants owing to good resistance against sea water corrosion and also for pipe work in chemical plants.
Cupro Nickel 90 / 10 Compression Fittings are a copper-nickel alloy with an alpha – phase structure, which exhibits superior corrosion resistance in seawater.
Copper Nickel 90 / 10 Ferrule Tube Fittings are used in the Heat exchangers, Desalination for its very good corrosive resistance.Furthermore, Cu-Ni 90 / 10 Double Ferrule Tube Fittings is resistant to bio-fouling pro viding various economic benefits, and is relatively insensitive to stress corrosion.
Cupro Nickel 90 / 10 Male Connector Fittings contain 90 % copper and differ in strength and maximum sea water velocity levels they can handle but it is also the more economic and extensively used.
Copper Nickel 90 / 10 Compression Tube Fittings is often used in Condensers, Condenser Plates, Evaporator Tubes , Ferrules , Heat Exchanger Tubes, Corrosion Resistance, Petrochemicals, Salt Water, Erosion and Impingement, Moderate Strength, Retains Strength at High Temperatures.Cu-Ni 90 / 10 Male Connector Tube Fittings has nominal temperature coefficient of electric resistance, which is suitable for Marine condenser tube installations in place of Aluminum Brass, especially where higher water velocities are encountered.Cupro Nickel 90/10 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Cu-Ni 90/10 Tube To Male Fittings Chemical Composition GradeCuMnPbNiFeZnCupro Nickel 90/1088.6 min1.0 max0.05 max9-11 max1.8 max1 max Cupro Nickel 90/10 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.323 lb/in3 at 68 F2260 F50000 psi20000 psi30 % Equivalent Grades for 90/10 Cupro Nickel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSCupro Nickel 90/102.0872C70600 Cu-Ni 90/10 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is a Leading Manufacture And Exporter Of Cupro Nickel 90 Wire.
Some of the primary uses for Cupro Nickel 90 Wire include condensers as well as exchanger shells.
Cupro Nickel 90 / 10 Wires has 2 % to 30 % nickel, high oxidation resistance and stress corrosion cracking resistance.
Some common applications for Cupro Nickel 90 / 10 Coil Wires include: valves, pump components, fittings, flanges and various other marine hardware components.
The inclusion of controlled quantities of iron and manganese also give Cupro Nickel 90 / 10 Wire an extraordinary resistance to general corrosion and stress cracking, as well as to erosion and impingement due to turbulent water containing air bubbles and silt flowing at high velocities.Cupro Nickel 90 / 10 Coiled Electrode is highly resistant to corrosion in seawater because its electrode potential is adjusted to be neutral with regard to seawater.
Cu-Ni 90 / 10 Wire is not recommended for usage in heavily polluted water containing sewage and industrial wastes.
Sachiya Steel International offers Cupro Nickel 90 Round Bar, which is factory – made by our expert workmen who stand by factory required necessities of all the clienteles.
Cu-Ni 90 / 10 Square Bars is generally used in Fish crates for aquaculture, Hydraulic lines, Heat condensers and exchangers, Desalination units, Tubes for ships and power plants, Sea water pipework, Offshore fire water systems, and so on.Cupro Nickel 90 / 10 Flat Bars is a copper – based alloy industrialized as an economical substitute for Cu Ni 70 / 30 Round Bars.
Meanwhile, these Copper Nickel 90 / 10 Threaded Bars (UNS C70600) are an alloy of nickel, copper and firming components such as manganese and iron.
Meanwhile, Cu-Ni 90 / 10 Hollow Bars are also being offered in different sizes and shapes to our customers.Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round BarCupro Nickel 90 / 10 Hexagonal Bars are alloys of copper (base metal with the largest individual content) and nickel with or without other elements, whereby the zinc content may not be more than one percent.
For many decades, Copper Nickel 90 / 10 Triangular Bars have extensively been used as a piping material for seawater systems in shipbuilding, offshore, and desalination industries.
Cu-Ni 90 / 10 Bars for marine use were developed for naval applications in the early part of the century with a view to improving the corrosion resistance of condenser tubes and seawater piping.
