Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high-Quality Brass Tube to Female Pipes, which can also be used in slightly chlorinated and deserted water. Brass Tube Fittings performs well in oil and gas applications where deserted and low hydrogen sulfide exist. However, Brass Compression Fittings is prone to chloride attack, particularly in oxidizing conditions. Brass Compression Tube Fittings operates well in environments requiring moderate corrosion resistance and high mechanical properties. Brass Female Connector Fittings resists oxidation up to 1292 Degree F (700 Degree C) continuously and up to 1500 Degree F (816 Degree C) on an intermittent basis.
Phone No: +91 9769056007
Email id: [email protected]
Website: https://sachiyasteel.com/blog/brass-tube-to-female-pipes/
Sachiya Steel International is one of the prominent Manufacture and Exporter of Brass Tube to Female Pipes, which can also be used in slightly chlorinated and deaerated water.
Brass Tube Fittings performs well in oil and gas applications where deaerated and low hydrogen sulphide exist.
However, Brass Compression Fittings is prone to chloride attack, particularly in oxidizing conditions.
Brass Compression Tube Fittings operates well in environments requiring moderate corrosion resistance and high mechanical properties.Brass Female Connector Fittings resists oxidation up to 1292 Degree F (700 Degree C) continuously and up to 1500 Degree F (816 Degree C) on an intermittent basis.
Brass Ferrule Fittings is typically done in the 1382 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) range followed by air cooling.
For smaller deformation such as bending, preheating of Brass Double Ferrule Fittings should be done in the 212 Degree F – 572 Degree F (100 Degree C – 300 Degree C) temperature range.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Tube to Male Fittings, which resists most oxidizing acids and can withstand all ordinary rusting.
There is little overall difference in corrosion resistance among of Brass Tube Fittings, but slight differences in chemical composition do make certain grades more resistant than others do against particular chemicals or atmospheres.
Brass Compression Fittings is non – magnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths.
Brass Compression Tube Fittings has superior corrosion resistance and is generally nonmagnetic, along with harden able only by cold working.Brass Male Connector Fittings is immune to foodstuffs, sterilizing solutions, most of the organic chemicals and dyestuffs, and a wide variety of inorganic chemicals.
Because of its ability to withstand the corrosive action of various acids found in fruits, meats, milk, and vegetables, Brass Ferrule Fittings is used for sinks, table tops, coffee urns, stoves, refrigerators, milk and cream dispensers, and steam tables.Brass Double Ferrule Fittings are not ideal in temperature range 427 Degree C – 816 Degree C where precipitation of chromium carbides occurs.
Due to layer – wise building method, Brass Ferrule Tube Fittings have a certain anisotropy which could be seen from mechanical properties.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Tube to Union Fittings, which contain Chromium and Nickel, along with appropriate combination of Manganese, Copper & Nitrogen.
These Brass Steel Tube Fittings have Austenitic structure in annealed condition at ambient temperature.
Brass Steel Compression Tube Fittings has multi – facet applications in numerous areas, such as in the Catering and Food Processing industry.
These Brass Steel Compression Fittings has topped as the ‘material – of – choice’ for its good weld ability and corrosion resistance qualities.Brass Steel Union Fittings can be seen used extensively across Utensils, Tableware, Cutlery, kitchen equipment.
The convoluted core in these Brass Steel Union Tube Fittings allows for flexibility, and limits kinking, where it is available with a wide variety of end connections.
Brass Steel Ferrule Fittings is suitable for high – temperature, vacuum, medium – pressure, corrosive or general – purpose environments.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 316Ti Tube to Female Pipes, which works successfully with most common welding methods with the exception of oxyacetylene.
This Stainless Steel 316Ti Tube Fittings is an iron – base and austenitic alloy with tremendous corrosion resistance to a range of different media.Our Stainless Steel 316Ti Compression Fittings shows to be of a great usage in a number of applications like flue – gas desulfurization, chemical processing, food processing and storage in addition to pharmaceutical applications to mention a few.
Application of this Stainless Steel 316Ti Female Fittings could save cost when carefully compared to higher – cost alloys to decide if the essential resistance is attained in the chosen media.Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes Applications of our Stainless Steel 316Ti Female Connector Fittings are restricted to a maximum temperature of 1000 Degree F per ASME.
Resistance to sulphuric acid is particularly excellent, but this Stainless Steel 316Ti Ferrule Fittings shows good resistance to phosphoric acid, nitric acid and also in chloride environments.
Our Stainless Steel 316Ti Double Ferrule Fittings is a good option when chloride stress corrosion cracking is an issue and resists pitting and crevice corrosion.To achieve maximum, ductility, this 316Ti Stainless Steel Female Fittings would be heated to 2100 Degree F. However, this heating process in our SS 316Ti Tube Fittings would have a negative effect on the stability of the material.Stainless Steel 316Ti Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 316Ti Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN316Timin.–––––16.02.0010.0–max.0.082.00.750.0450.03018.03.0014.0– Stainless Steel 316Ti Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max316Ti5152053575205 Stainless Steel 316Ti Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C316Ti800019317.217.818.416.221.5500720 Equivalent Grades for 316Ti Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormGOSTJapanese JISBSEnNoAFNOR316TiS31635320S31X6CrNiMoTi17-12-21.4571Z6CNDT17‐1208Ch17N13M2TSUS 316Ti SS 316Ti Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry