Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Cupro Nickel 90 Tube to Male Fittings, where we are made for utilizing superb raw materials. Typically, Cu-Ni 90 / 10 Tube Fittings are used as seawater condenser systems and desalination plants owing to good resistance against seawater corrosion and also for pipework in chemical plants. Cupro Nickel 90 / 10 Compression Fittings are a copper-nickel alloy with an alpha–phase structure, which exhibits superior corrosion resistance in seawater.
Website: Sachiya Steel International
Email us: [email protected]
Contact us: +91 9769056007
Site: Cupro Nickel 90 Tube to Male Fittings Manufacturer
Sachiya Steel International is Leading Manufacturer And Exporter of Cupro Nickel 90 Tube to Male Fittings, where we are made these for utilizing superb raw materials.
Typically, Cu-Ni 90 / 10 Tube Fittings is used as sea water condenser systems and desalination plants owing to good resistance against sea water corrosion and also for pipe work in chemical plants.
Cupro Nickel 90 / 10 Compression Fittings are a copper-nickel alloy with an alpha – phase structure, which exhibits superior corrosion resistance in seawater.
Copper Nickel 90 / 10 Ferrule Tube Fittings are used in the Heat exchangers, Desalination for its very good corrosive resistance.Furthermore, Cu-Ni 90 / 10 Double Ferrule Tube Fittings is resistant to bio-fouling pro viding various economic benefits, and is relatively insensitive to stress corrosion.
Cupro Nickel 90 / 10 Male Connector Fittings contain 90 % copper and differ in strength and maximum sea water velocity levels they can handle but it is also the more economic and extensively used.
Copper Nickel 90 / 10 Compression Tube Fittings is often used in Condensers, Condenser Plates, Evaporator Tubes , Ferrules , Heat Exchanger Tubes, Corrosion Resistance, Petrochemicals, Salt Water, Erosion and Impingement, Moderate Strength, Retains Strength at High Temperatures.Cu-Ni 90 / 10 Male Connector Tube Fittings has nominal temperature coefficient of electric resistance, which is suitable for Marine condenser tube installations in place of Aluminum Brass, especially where higher water velocities are encountered.Cupro Nickel 90/10 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Cu-Ni 90/10 Tube To Male Fittings Chemical Composition GradeCuMnPbNiFeZnCupro Nickel 90/1088.6 min1.0 max0.05 max9-11 max1.8 max1 max Cupro Nickel 90/10 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.323 lb/in3 at 68 F2260 F50000 psi20000 psi30 % Equivalent Grades for 90/10 Cupro Nickel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSCupro Nickel 90/102.0872C70600 Cu-Ni 90/10 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading Manufacturer and Exporter of Cupro Nickel 90 Tube to Union Fittings, where our offered range is ensured to be in compliance with the international quality standards.
Cu-Ni 90 / 10 Tube Fittings (UNS C70600) exhibits superior corrosion resistance in seawater.
An addition of iron in Cupro Nickel 90 / 10 Compression Fittings was made to increase its resistance to general corrosion, erosion and impingement corrosion resulting from the turbulent flow of water containing air bubbles and silt flowing at a high velocity.
The main, wrought Copper Nickel 90 / 10 Ferrule Fittings chosen for sea water service contain 10 or 30 percent nickel.Meanwhile, Cu-Ni 90 / 10 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers.
For the sake of accuracy, Cupro Nickel 90 / 10 Union Tube Fittings is presented in bold type in the units in which it was originally published with the lighter type equivalents in corresponding units.
The addition of manganese, niobium, iron and or chromium in Cu-Ni 90 / 10 Union Tube Fittings improves their corrosion resistance and strength.Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union Fittings | Cupro Nickel 90 Tube to Union FittingsCu-Ni 90 / 10 Compression Tube Fittings is often used in MARINE, such as for Boat Hulls, Tube Sheet for Salt Water Service, Salt Water Pipe Fittings, Salt Water Piping Systems, Salt Water Piling Wrap, Hot Water Tanks, Salt Water Baffles, Propeller Sleeves, Ship Hulls, and Water Hoses.Cupro Nickel 90/10 Tube to Union SpecificationsSpecification:ASTM B122 / ASME SB122Size Range:1/16”OD to 2”OD, 2mm OD to 50mm ODThread:NPT , BSPT, BSPPEnd:Threaded, Welding, JICPressure Rating:3000 & 6000Type:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fittingCupro-Nickel 90/10 Tube To Union Chemical CompositionGradeCuMnPbNiFeZnCupro Nickel 90/1088.6 min1.0 max0.05 max9-11 max1.8 max1 maxCopper Nickel Alloy 90/10 Tube To Union Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.323 lb/in3 at 68 F2260 F50000 psi20000 psi30 %Equivalent Grades for 90/10 Copper Nickel Ferrule Fitting Tube To UnionSTANDARDWERKSTOFF NR.UNSCupro Nickel 90/102.0872C70600Cupro-Nickel 90/10 Tube To Union Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Cupro Nickel 90 Threaded Forged Fittings, where we make use of sophisticated techniques in the manufacturing process which in turn allow us to ensure complete flawlessness of the finished product.
Cupro Nickel 90 / 10 Forged Threaded Elbow (UNS C70600) also have important additions of iron and manganese which are necessary to maintain good corrosion resistance.
Cupro Nickel 90 / 10 Forged Threaded Tee are annealed at temperatures between 593 and 816 Degree C (1100 and 1500 Degree F).Cupro Nickel 90 / 10 Forged Threaded Cross are still used extensively in modern boat building.
Meanwhile, Cupro Nickel 90 / 10 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
We also offer Cupro Nickel 90 / 10 Forged Threaded Fittings at industry leading prices.
In some cases, seawater piping systems in Cupro Nickel 90 / 10 Forged Threaded Coupling can last a ship’s lifetime.Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged Fittings | Cupro Nickel 90 Threaded Forged FittingsTypical applications of Cupro Nickel 90 / 10 Forged Threaded Union include tubes & tube-plates for light – duty condensers, feed water heaters and evaporators, power stations & multi – core cabled tubes for hydraulic and pneumatic lines.
Sachiya Steel International is a known manufacturer of Cupro Nickel 90 Tube to Female Pipes, which is relatively insensitive to stress corrosion.
Because of this, Cu-Ni 90 / 10 Tube Fittings is used for marine hardware, piping systems and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats.
Small amounts of iron and manganese in these Cupro Nickel 90 / 10 Compression Fittings are added to improve corrosion resistance in high – velocity waters, including seawater.Copper Nickel 90 / 10 Female Connector Fittings is often used in condensers, condenser plates, distiller tubes, evaporator and heat exchanger tubes, salt water piping, and ferrules.
In spite of the appropriate properties of these Cu-Ni 90 / 10 Ferrule Fittings, instances of failure have been experienced in practice.
Benefit of Cupro Nickel 90 / 10 Double Ferrule Fittings is its high resistance to befouling: in recent years this has led to sheathing developments particularly for structures and boat hulls.These Copper Nickel 90 / 10 Compression Tube Fittings are a copper-nickel alloy with low resistivity suitable for use at temperatures up to 300 Degree C (570 Degree F).
Cu-Ni 90 / 10 Female Connector Tube Fittings prevents stress corrosion cracking and pitting and crevice corrosion.
