Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Brass Tube Male Fittings, which resist the most oxidizing acids and can withstand all ordinary rusting. There is little overall difference in corrosion resistance among Brass Tube Fittings, but slight differences in chemical composition do make certain grades more resistant than others do against particular chemicals or atmospheres. Brass Compression Fittings is non – magnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Tube to Male Fittings, which resists most oxidizing acids and can withstand all ordinary rusting.
There is little overall difference in corrosion resistance among of Brass Tube Fittings, but slight differences in chemical composition do make certain grades more resistant than others do against particular chemicals or atmospheres.
Brass Compression Fittings is non – magnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths.
Brass Compression Tube Fittings has superior corrosion resistance and is generally nonmagnetic, along with harden able only by cold working.Brass Male Connector Fittings is immune to foodstuffs, sterilizing solutions, most of the organic chemicals and dyestuffs, and a wide variety of inorganic chemicals.
Because of its ability to withstand the corrosive action of various acids found in fruits, meats, milk, and vegetables, Brass Ferrule Fittings is used for sinks, table tops, coffee urns, stoves, refrigerators, milk and cream dispensers, and steam tables.Brass Double Ferrule Fittings are not ideal in temperature range 427 Degree C – 816 Degree C where precipitation of chromium carbides occurs.
Due to layer – wise building method, Brass Ferrule Tube Fittings have a certain anisotropy which could be seen from mechanical properties.
Sachiya Steel International is Leading Manufacturer And Exporter of Copper Tube to Male Fittings, which is available in different shapes, sizes and designs as per requirements given by the clients.
These Copper Tube Fittings is a chemical element in the carbon group, where it is a soft and malleable metal and is regarded as both heavy metal and poor metal.
Our firm specializes in trading and supplying a quality array of Copper Compression Tube to Male Fittings, which is offered at market leading prices.
We are one of the distinguished organizations that are engaged in manufacturing, supplying and exporting a qualitative gamut of these Copper Male Connector Fittings, which are available in different sizes and shapes for our clients.With the help of our procurement agents, we have been able to trade and supply a comprehensive assortment of our Copper Ferrule Tube to Male Fittings, which are available in customized sizes and shapes for our patrons.
These Copper Double Ferrule Tube to Male Fittings is designed by the skilled professionals with the help of progressive technology and using quality approved components as per the set industry standards.Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male FittingsNew technologies like laser welding are used to manufacture our advanced Copper Compression Tube Fittings as they are of superior quality and more.
Our company has achieved a milestone in offering these Copper Male Connector Tube Fittings to the clients, which are extruded, cold drawn & annealedCopper Tube to Male Pipes Fittings SpecificationsSpecifications:ASTM B280 ASME SB280 / ASTM B68 ASME SB68Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Copper, 300/1000/3000PSICopper Tube to Male Pipes Fitting Chemical CompositionStandardCopper NO.Chemical CompositionMechanical PropertiesCU%P%TemperTensile strength (Mpa)Elongation (%)Average Grain Size (mm)ASTMB280/68C12200>99.90.015 to 0.040>60>205>40>0.040>50>245Copper Tube to Male Pipes Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Nickel 200 Tube to Male Fittings, which has some outstanding quality of attributes such as durable, fine finish, dimensionally constant, and so on.
These Nickel 200 Tube Fittings (UNS N02200) has a low annealed rigidity and very low work – toughening rate that is needed for cold establishing processes such as spinning, coining, deep drawing, and so on.
For the reason that the alloy shows excellent corrosion resistance, our Nickel 200 Compression Fittings has been used in caustic solution, food handling machinery, all – purpose corrosion – resistant components and constructions.These Nickel 200 Male Connector Fittings provide corrosion resistance in neutral and reducing media along with in oxidizing environments offered that the oxidizing media permits the establishment of an unreceptive oxide film.
Meanwhile, our Nickel 200 Compression Tube Fittings are as well being offered in different sizes and shapes to our customers.
These Nickel 200 Ferrule Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.Sachiya Steel International is one of the pioneer stockiest and trader of our quality Nickel 200 Double Ferrule Fittings, which are often required in complex applications, where corrosion and thermal resistance are demanded.
These Alloy 200 Male Connector Fittings are nickel and chromium alloys, as well as nickel and molybdenum alloys with high – temperature resistant properties.Nickel 200 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Nickel Alloy 200 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiNickel 2000.15 max0.35 max0.35 max0.01 max0.25 max0.40 max99.0 min Nickel 200 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationNickel 2008.9 g/cm31446 °C (2635 °F)Psi – 67000 , MPa – 462Psi – 21500 , MPa – 14845 % Equivalent Grades for 200 Nickel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENNickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2 Alloy 200 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.