Are you interested in learning how to Car Window Tint from Car Window Tint Colorado Springs?

Drive-In Autosound, Colorado Springs, Pueblo, Colorado, Remote Start, Car Audio, Speakers, amplifiers, subwoofers, Bluetooth, Apple CarPlay, Android Auto, Car Stereo, Navigation Receiver, GPS, window tint, window tinting, Truck & Jeep Accessories, Wheels, Tires

Table of Content

• Introduction
• How To Shrink Window Tint To Back Windows
• The most common mistake people make
• Conclusion 

Introduction

When newcomers shrink rear windows number one is gonna be undercutting the film. so we mentioned in our training tutorials that you should never cut the Car window tint short when you're new to shrinking the chances of the crease in the Car window tint are going to be so much higher as opposed to. when you're more experienced and the most commonplace is that you can increase. the Car window tint is going to be on the edges towards where the Car Window Tint Near Me finishes and this is because it's usually where the glass curbs the most towards the bottom or the top corners now. if you know that you know you're going to be more likely to decrease the Car window tint on the edges then the worst thing you can do is cut it so close to the dot-matrix and leave yourself no spare tint for those creases.

How To Shrink Window Tint To Back Windows

So what we recommend is cutting the Car window tint parser dot-matrix if you do get the crease you know that you're gonna be cutting that Car window tint off anyway number two this is the most common problem overall that we see and that is just not understanding the process of shrinking the Car window tint we see so many newcomers to tinting just shrinking on autopilot you know they see other videos where you're they shrink for three seconds and then push and that is not how you will learn to shrink you have to understand what is going on you know don't fall into the pattern of what you're doing if you don't know what is happening when you're shrinking the Car window tint and yes in our training we do say stick to a shrinking line but you still have to understand what is happening to the Car window tint, for instance, you know you have to look what is happening as you are heating it.

 you know it doesn't need a bit more heat to have our heat it too much or is this going to be primed for a crease if we carry on so again you need to understand what is happening throughout this whole process in order to succeed and you're only going to understand what is happening by evaluating every single part that is happening in frontier which then brings me to number three which is trying different things so in order to be able to really understand what is happening with the Car window tint you need to keep pushing yourself if you make a mistake for instance you know don't throw that piece of Car window tint away or carry on shrinking it as normally need to use it as practice you know to find out what happens when you do overheat the Vehicle Window Tint Near Me find out what happens when you try and shrink and push the whole window out in 20 seconds you know try different things to help your understanding of the window Car window tint shrinking process you're going to learn so much quicker by pushing your boundaries.

The most common mistake people make

And seeing what is possible with the Car window tint then you know just trying what you're doing if you feel like it's not going to plan number four is going to be over pushing the Car window tint as single mistakes go this is the most common mistake you'll make again it's the autopilot mode well you know you think that you held the heat gun on the glass for long enough and then you just push it without paying it attention to you know what is really happening check if it shrunk then push out only what is shrunk so we're just going to show you a clip from one of our shrinking tutorials inside the course next to hazard perception tutorial so this is where we're going to be watching over a student to see the mistakes he makes so we can liken and identify them to the mistake so you are gonna make if he improved his technique so here it's got a crease there how did he do it so here he didn't really even touch it with the heat it didn't even shrink it at all but then when you're gonna push you only push out what shrunk nothing he's shrunk he didn't stop and identify' look how far he pushed there that's the crease steamroll crease pushing out what isn't shrunk it was exactly what we said he was doing wrong on the Astra and out of all the mistakes we see again this is by far the most common mistake.

 so what basically happens is you know in autopilot you shrink the top of the finger and then you push way too far you know you push what isn't shrunk and you're gonna end up getting the steamroller crease which is where you try to force the Car window tint down when it's not shrunk thus causing it to fold on itself where you get again the steamroller crease now what this will look like is it would be a thick sharp crease that you could almost pick with your fingernail and number five is over shrinking the Car window tint so this is another common mistake you're gonna need to understand what is shrunk and what isn't shrunk and you know when it's ready to be pushed out you don't want to you know nuke the Car window tint if it's already shrunk this is why we talk about the shrink line so as you can see here this is my shrink line so this one here this finger is coming from the bottom which means it needs to be shrunk whereas this above the shrink line is already shrunk and can easily be pushed out so many videos I've seen where people are you know spending so much time here in this section more than what they need to and again it's already shrunk.

 you can just push it out you're at risk of burning the Car window tint or getting the banana tension marks so there are my top five reasons to the mistakes many of you are going to be making when shrinking again just be very careful not to go into the autopilot mode we see other videos out there that again they're going to try to tell you to follow exact rules but you need to understand what is happening and evaluate everything that is happening in order to succeed because you know unfortunately not all back windows are the same so what you could do is have a friend record you and then you could rewatch it yourself and you could sit back and have a better point of view and point out any errors that you may make so shrinking it is going to be the hardest method to pick up when starting out but it is also the most enjoyable and you have to understand you will make mistakes know that you know it's not just gonna happen overnight we didn't get the shrink in Windows without all the same mistakes that you're gonna be making right now.

Conclusion

So you know don't give up we promise once you crack it it's where the fun begins and if you're serious about the tin industry you know feel free to check out our hundred eighty tutorial program it includes five courses and how you can start and build your own profitable window tinting business and it also has four Shrinking tutorials that are over an hour long and also in the description below I've added a free 240 page step-by-step manual for you that you can follow when tinting so you don't miss any steps so forgot to say in the video so we're doing this while we're making the beer uh while we're wasting all this Car window tint to show you what happens and don't forget to subscribe to the channel we're only going to upload you know good content like this we won't spam you of anything again if you're interested in window tinting what only upload the best content and if you are struggling with anything as well local you have videos just comment below and our team will try to help you and comment back to everybody we can

Related Product:

DELUXE PACKAGE

2-ZONE