The sheet metal laser cutter adopts IGOLDENCNC fiber laser source, an integral gantry-type mechanism system and an intelligent laser cutting head.
It can support large, effective processing formats and intelligent cutting with long service life and smooth cutting effect.
In addition, the aluminum sheet metal laser cutter has a complete dust-proof and anti-pollution design, which greatly improves the stability of the machine’s performance, processing efficiently and fluently.
How sheet metal laser cutter works
The laser beam is a column of very high intensity light, of a single wavelength, or color. In the case of a typical CO2 laser, that wavelength is in the Infra-Red part of the light spectrum, so it is invisible to the human eye. The beam is only about 3/4 of an inch in diameter as it travels from the laser resonator, which creates the beam, through the machine’s beam path. It may be bounced in different directions by a number of mirrors, or “beam benders”, before it is finally focused onto the plate. The focused laser beam goes through the bore of a nozzle right before it hits the plate. Also flowing through that nozzle bore is a compressed gas, such as Oxygen or Nitrogen.
Focusing the laser beam can be done by a special lens, or by a curved mirror, and this takes place in the laser cutting head. The beam has to be precisely focused so that the shape of the focus spot and the density of the energy in that spot are perfectly round and consistent, and centered in the nozzle. By focusing the large beam down to a single pinpoint, the heat density at that spot is extreme. Think about using a magnifying glass to focus the sun’s rays onto a leaf, and how that can start a fire. Now think about focusing 6 KWatts of energy into a single spot, and you can imagine how hot that spot will get.
The high power density results in rapid heating, melting and partial or complete vaporizing of the material. When cutting mild steel, the heat of the laser beam is enough to start a typical “oxy-fuel” burning process, and the laser cutting gas will be pure oxygen, just like an oxy-fuel torch. When cutting stainless steel or aluminum, the laser beam simply melts the material, and high pressure nitrogen is used to blow the molten metal out of the kerf.
On a laser sheet metal cutting machine, the laser cutting head is moved over the metal plate in the shape of the desired part, thus cutting the part out of the plate. A capacitive height control system maintains a very accurate distance between the end of the nozzle and the plate that is being cut. This distance is important, because it determines where the focal point is relative to the surface of the plate. Cut quality can be affected by raising or lowering the focal point from just above the surface of the plate, at the surface, or just below the surface.
There are many, many other parameters that affect cut quality as well, but when all are controlled properly, laser cutting is a stable, reliable, and very accurate cutting process.
Features of sheet metal laser cutter:
Powerful ProCutter For High Power Cutting
A smart cutting head guarantees high dynamic performance for thin material cutting and best quality when cutting thick materials. It operates stably with laser power of up to 30 kW. You benefit from stable performance both at cutting thick CS plates and curved contours.
Cast Aluminum Crossbeam
The crossbeam boasts of high rigidity and light weight, promising a high dynamic response and processing efficiency.
Double Exchange Platform
Auto up & down chain-type parallel pallets system keeps your production flowing without machine stop. With an immediate switch, you benefit from the fastest speed of pallet exchanging.
Safety and Clean, 0 Pollution
Fully enclosed structure, safety viewing window, dust removal system, etc., every detail promises a safe and pollution-free production environment.
Pipe Processing
The fully automatic torque control electric chucks clamp large diameter pipes and provide adjustable current, stable performance as well as great clamping force.
Sheet metal laser cutter applications:
Steel laser cutter can carry up to 8000W laser power, so cutting some thick plate, it is a very good choice. For example, agricultural machinery, textile machinery, food machinery and construction machinery and other large machinery and equipment manufacturing, usually use high power fiber laser cutting machine for processing.
Suitable for stainless steel, carbon steel, silicon steel, aluminum alloy, titanium alloy, galvanized steel, aluminum-plating zinc plate, copper, and other metals.
