Are you planning on installing a set of aluminum stair railing? You should ensure that you have everything in place, and following the proper steps will ensure that the railings are correctly secured. In this article, we bring you a helpful guide that you can use for different railing types.
GUIDE FOR INSTALLING ALUMINUM STAIR RAILING
STEP-1
Firstly, you should have the right tools for the job. The tools that you will need for this job are:
- Cordless drill
- Phillips screwdriver
- Measuring tape
- Rubber mallet
- Other materials such as clamps and screws
STEP-2
Now you have to install the posts. A post is something that will help reinforce the rails and provide support. You have to add the post approximately five centimeters away from the edges and then line it up evenly throughout the stairs. You will be using drills and screws to secure the post to the surface.
STEP-3
Next, it is time to prepare the rails. You can start by screwing on the vertical rails to the posts you have installed, and you should make sure that it is secured. Then go to the lower horizontal posts, and they should connect to the vertical rails through a slot that you will drill or screw on.
STEP-4
Finally, you will want to install the pickets and the set of the vertical rails to complete the aluminum stair railing. It will depend on the manufacturer's guide in which order you will install them.
There are many things that you have to watch out for when you are installing the stair railing. You always have to check to ensure that everything is evenly aligned. Then you want to make sure the post and vertical rails are secure and steady. Test the rails one last time by wedging them forth and back. If they're assured, you have done a great job!
Call us now: +1 (866) 694-2823
For more info: - http://www.omegaaluminumrailingsystem.com/