logo
logo
Sign in

Know more about Concrete Formwork

avatar
Macro Saga
Know more about Concrete Formwork

Formwork is a complex technique involved in construction which requires specialist contractors for proper use. It's the term given to specific moulds or receptacles into which concrete is poured to make slabs for construction or actual components of buildings. Once the concrete has hardened to an adequate level, the forms are removed. 

Formwork is the moulding into which wet concrete is poured to give the user greater control over the exact shape of the finished, cured concrete. Formwork can be built with almost anything but is most often built with a combination of timber, plywood, and steel or aluminum hardware. Formwork can either be dismantled after the concrete has cured to an acceptable level, or it can be left to remain embedded on a permanent basis.  Formwork Contractors Malaysia

The various methods and types of formwork have their individual advantages, but unless you're doing this as a business, the most common type mentioned above, is more than sufficient. Making small bits of formwork for shed or room foundations, walls, or even staircases, can be done with the simplest materials. Home centers sell plywood for this purpose with a glossy finish on one side to prevent adhesion. 

The basic concept of formwork is the creation of "walls" that will sand which concrete poured between them. The height, width, and overall design-complexity of these walls are flexible so as to meet the needs of any given job. It can be as simple as a 1 foot square, 5 cm high deck-post base or a labyrinth of foundation pathways, walls, staircases, and almost anything imaginable. 

One thing is for sure, and that is that formwork is responsible for some of the most intricate concrete structural designs around today. 

Short walls won't require all that much bracing and support, but as your walls get higher, it will be imperative that you don't skimp on the support. Wet concrete behaves like any other liquid and will produce hydrostatic pressure. In other words, as with any substance in a fluid state, there will be more pressure at the bottom of the container and will lessen with height. This means you have to concentrate more support at the bottom.  System Formwork Malaysia

There are various methods for attaching formwork together securely. Obviously, the thicker and taller the wall, the more support you'll need. There is a variety of hardware available for individual specific tasks - such as for columns or walls. Wedges that are hammered into staggered slots in flat bars of steel are used for formwork with smaller perimeters, whereas long bolts threaded through sleeves cut out to fit within the formwork are used for larger projects.

collect
0
avatar
Macro Saga
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more