This article is not merely limited to Aurora Fire Pumps but it also applies to all brands of fire pumps including: Peerless, Patterson, Allis Chalmers, etc.
Customers need to know many different things about their fire pump systems, but when it comes every Aurora Fire Pump package system or individual Aurora pump parts, it is very important to remember two main points.
First and foremost, please remember, all fire pumps, no matter the manufacturer- Peerless, Patterson, Aurora, Allis Chalmers, etc., that are horizontal split case or vertical in-line must have packing.
Typically, when someone notices the fire pump leaking it is when the drain lines clog up.
So it is preferable to blow out or vacuum the lines every three months or so.
The second point to remember when dealing with fire pumps is to remember that when a fire pump starts automatically it never stops until you press the red stop button on the front of the control panel.
In this report, as essential equipment related to fire fighting market, the global fire pump industry is directly affected by the status and progress of fire fighting demand.
Worldwide, the market size of fire pump was estimated at about 1284 million USD at 2016, with about 266 thousand units of fire pumps sold used on fire pump.
The market is forecasted to reach about 1545 million USD by the end of 2022, based on revenue of related manufacturers.
The pump intake is either connected to the public underground water supply piping, or a static water source (e.g., tank, reservoir, lake).
Currently, North America was the largest production region of fire pump based on revenue; in 2016, North America held about 33% revenue share of global fire pump.
It was followed by Europe and Japan, which respectively have around 32% and 15% of the global total industry.
