
So schüprotect the water faucet
wasserhahn is a valve that controls the flow of water. It is usually used with a Spülbecken in order to facilitate the use of non-potable water. So use it and wait Waschbeckenhähne:
1. Wäduring the Installation of the faucet will have different impurities are removed in the water pipe completely—constantly, in order to prevent that the impurities are cleaned and problems such as Sch—the valve core and cause congestion. Blocked or leaking. At the same time, the GUI of the faucet needs to be cleaned, to avoid the rest of the decorative materials.
2. Any type of faucet, w&mdash should not be;while the use of too hard. Turn or wäyou choose it carefully, to use it, and do not use the handle as a Handlaufstütze. The filter cover drain must be removed regularlyäßig and cleaned, and the configured Schlauchausrüstung must also your nat"natural history"extension retained to prevent Breaking of the water line.
3. Some water-lifting devicesähne schließen, shortly after the use is fully complete", leaking, loose handles, loose joints and other leaks. Usually this Situation of self-gelö can;st be.
4. If the KüChenarmatur the ceramic Dünnplatten-valve cone-Verschlussd–not full"is fully closed, it's möresembled that tough prospects might be scratched body, the Dichtfläche or not enough on the valve cone out–bte biasing force. If it is at this point of a hard object scratched, müyou need to find a company, the After-Sales maintenance moistureührt. If the biasing force of the faucet is not enough, müyou need to remove the handle and the coil tightening.
5. Wipe the faucet of the faucet gently with a clean, soft cleaning cloth dampened. Do not Clean with metal wire rings and Reinigungstücher with hard objects—and avoid contact between hard objects—and the GUI of the faucet.
6. If the faucet stains such as thick masks and sediments are, köcan you have a neutral Flüssigglasreiniger, a pure transparent Flüssigglasreiniger, a s—urefreie, non-abrasive soft Fl–the reliability of, or a full—to use constantly gelöstes powder without friction, Lösung. Remove cleaning agents such as gloss.
7. You use to Clean the wasserhahn bad no abrasive cleaners, Tücher, or Kraft Paper tücher, as well as s—urehaltige cleaner, polishing compounds, or coarse cleaner.
The use of a faucet can be referred to as the Schöcreation. Due to its invention and application, kö, can more people experience the joy and convenience of living. How is the internal structure of the Hot and cold faucet? If the Hot and cold water faucet work, which part of it works?
Hot and cold water inlet works
The main tap für’it, and cold water must consist of a handle, a valve core, a braided inlet pipe and installation accessoriesör. The operating principle of the ceramic coil: In General, the bottom of the ceramic coil is made of three Löchern, a für cold water in and out of für’it is water and the other für inside water. Coil. The water valve coil has chern seal rings both on the cold as well as to the heißen Lö, to ensure that they are sealed from the Köbody. After the Subsequent’s the Hauptk body of the Heiß- and cold-water inlet pipe, ensure that the Heißwater pipe and the cold water pipe correspond to the two Löchern of the valve core. The coil controls dependent primary competitive advantages:"take the &Nbsp;opening and locking state of the two Löcher, and on the motion of two ceramic plates, in order to work.
The handle switch moves the valve stem to move the ceramic plate, and the left and right hole are sealed. To this date no water in the coil. The grounding gasket of the water coil through the coil in the main outlet channel fließen can. In this way, no water gets in the coil and it fließt no water out of the pipe. This is the closed state of the water pipe, the structure and the function principle of the Misch batterie.
What is the principle of the Hot and cold faucet? Tats—mainly water - lifting devices&mdash can be referred to Hot and Cold;hne as the "mixed water-lifting devicesähne", ie water-lifting devicesähne, the heißes and cold water with heißmixing water and the water temperature set kö. The principle is to use a hochpr—precision valve core of ceramic or steel in the faucet to control the water power. In this way, when you use a waschtischarmatur cold and hot water in different directions.
As we turned the armatur in the state of the water outlet was moved to the Keramikstück so that the top hole is full—has been fully closed geöopened, and the right hole is full—fully. In this way, cold water can not penetrate into the valve core, heißwater enters into the valve core and the irregularäßigen in-depth Löcher in the ceramic plate show that the room is in the six-way valve core is very small. In this way, fließt the heiße water and, after it has flowed through the bottom hole in the Köbody. &Nbsp;open the cold water handle on the right side, and the channel für the Hot and cold water pipe in the middle of opened at the same time, and the herausflie water warm water is.