“As we always support together with our customers on all our products, this is our 1008 controller installed on 130 TON machine by our OEM customer, PATEL PLAST. The performance of our controller is quite good, we were there with the customer for a software updating on our controller according to the machine options.”
We take immense pleasure to cordially invite you to the opening of our new branch office at Bangalore.
So, you are all welcomed to see the delicacy of the place.
Hence we request you to grace this occasion by your presence and wishes.
To get the best mold part, it is essential to consider the temperature in the injection molding machine.
In addition, effective temperature control will help to reduce quality problems such as shrinking, warping, and other issues that occurred in the plastic material.During the injection molding processing, a specific temperature has to be maintained in the process, or else the temperature rise will affect the final output of the product.If the temperature is low, the plastic material may not blend properly; conversely, if the temperature is more, the plastic mixture may burn so that the optimum temperature must be maintained in the injection molding processing.Mold Temperature:The mold temperature is one of the reasons that affect the mold quality in injection molding processing.
Therefore, to get the best mold quality, it is essential to balance the temperature.
To optimize the precise temperature control it is essential to use a mold temperature controller with the injection molding machine.Over Cooling & Under Cooling Problem:When the mold surface temperature is low, then it affects the molded product also.
However, if the temperature is high, it creates the dimensional shrinkage of the product.
Also, the uneven heat distribution within the mold can result in various shrinkage rates and other issues.To avoid such types of problems it is important to use the mold temperature controller.For Better Mold Temperature Control:The mold temperature in the IMM has to be lower than the temperature in the barrel so that the material cools down.Therefore, the cooling lines are filled with water to reduce the temperature, or else it is filled with oil to heat the mold to maintain the optimum temperature.Mold Temperature Controller:It is a component that is installed on the injection molding machine to ensure the temperature during the injection molding processing.
