#Towerlamp to indicates the machine's working performance status and machine condition.
It is commonly used for CNC machines, Injection molding machines, special purpose machines, and etc.,
If you are reading this, you may already know about the processing of plastic injection molding machines.
However, in Plastic injection molding, there are many chances to make lots of errors.
These problems range from small to large, which affects your product’s quality.
If these kinds of mistakes are something you need to reduce, then read on to find out the common defects that could arise during the plastic injection molding process.
Get to know how to what they are, and how you can head off them.Here I have shared significant problems that may occur during the plastic injection molding process.Flow Lines:Flow lines are like marks or a kind of pattern that occurs on the output product.
It generally happens due to the dynamic speed at which the plastic flows through the molding tool or a moderate injection speed that allows the plastic to fix at varying rates in different areas.The most reliable solution is to withdraw these flow lines by improving plastic injection molding speed and increasing the nozzle diameter to improve flow speed.Burn Marks:A possible defect in injection molding is due to the high temperature at injection molding.
