Sachiya Steel International offers a wide range of Inconel 718 Angle, which has high strength properties, worthy workability and good weldability. Age – hardening treatments are not required, as Inconel 718 Angle is hardened and strengthened through cold work only. Inconel 718 C-Channel is highly resistant to chloride – ion stress – corrosion cracking due to the high nickel content, where low sulfur plummeting furnace environments should be utilized in forging.
Inconel 718 H-Beam is resistant to a wide range of corrosive media and has developed into a wide spectrum of applications for high temperature strength and corrosion resistance. For heavy hot work in Inconel 718 I-Beam, the range should be in between 1900 Degree F and 2250 Degree F (1040 Degree C and 1230 Degree C); light work can be done to 1718 Degree F (870 Degree C).
Inconel 718 Angle | Inconel 718 Angle | Inconel 718 Angle | Inconel 718 Angle | Inconel 718 Angle | Inconel 718 Angle | Inconel 718 Angle
Inconel 718 T-Beam is a superior choice for gas turbine components including jet engines, titanium dioxide plants and chlorination equipment to 1000 Degree F. The chromium content of Inconel 718 Chain gives better resistance than Nickel 200 and Nickel 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.
Fine grain Alloy 718 Angle typically has better corrosion resistance as well as fatigue, impact and higher tensile properties. The strength and oxidation resistance of these Alloy 718 C-Channel at high temperatures make it useful for many applications in the heat – treating industry.
Inconel 718 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B166 / ASME B166 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Inconel 718 Angle |
: | 5mm to 9mm |
| Inconel 718 Channel |
: | 40mm*20mm~300mm*300mm |
| Inconel 718 Beam | : | 3″ thru 12.31″ |
| Inconel 718 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
Inconel 718 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas ProceInconeling
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
| For More Details Visit Our Website |
| https://steeltube.co.in/ |
| Email Us: [email protected] |
| Contact Us: +919769056007 |
Sachiya Steel International offers a wide range of Inconel 718 Angle, which has high strength properties, worthy workability and good weldability.
Age – hardening treatments are not required, as Inconel 718 Angle is hardened and strengthened through cold work only.
Inconel 718 C-Channel is highly resistant to chloride – ion stress – corrosion cracking due to the high nickel content, where low sulfur plummeting furnace environments should be utilized in forging.
Inconel 718 H-Beam is resistant to a wide range of corrosive media and has developed into a wide spectrum of applications for high temperature strength and corrosion resistance.For heavy hot work in Inconel 718 I-Beam, the range should be in between 1900 Degree F and 2250 Degree F (1040 Degree C and 1230 Degree C); light work can be done to 1718 Degree F (870 Degree C).
Inconel 718 T-Beam is a superior choice for gas turbine components including jet engines, titanium dioxide plants and chlorination equipment to 1000 Degree F.The chromium content of Inconel 718 Chain gives better resistance than Nickel 200 and Nickel 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.
Fine grain Alloy 718 Angle typically has better corrosion resistance as well as fatigue, impact and higher tensile properties.
Sachiya Steel International is a known firm that is involved in manufacturing qualitative collection of Inconel 718 Wire Mesh to the customers.
This Inconel 718 Wires is an oxidation and corrosion resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance.
The power of Inconel 718 Wire Mesh is mainly a solid solution effect from columbium and molybdenum.
This Inconel 718 Hexagonal Wire Mesh is a promising select for sea water uses, and so is extremely resistant in an extensive collection of mineral and organic acids.Alloy 718 Welding Wire Mesh (UNS N07718) resists an extensive collection of sternly corrosive atmospheres and is particularly resistant to crevice and pitting corrosion.
Meanwhile, this Inconel 718 Netting Wire Mesh is also being offered in different sizes and shapes to our customers.Alloy 718 Woven Wire Mesh achieves high-strength levels from the solid solution effects of Molybdenum and Niobium (Columbium) from room temperature up to 800 Degree C. For high temperature applications above 600 Degree C (1112 Degree F), this solution annealed Inconel 718 Spring Steel Wire Mesh is generally used.
There is almost no attack in mild environments of Inconel 718 Fencing Wire Mesh such as fresh and sea water, alkaline media and neutral pH environment.
Sachiya Steel International offers a wide range of Inconel 718 Threaded Forged Fittings to the clients, which are tested for its quality before being introduced in the market.
Inconel 718 Forged Threaded Elbow (UNS N07718) also exhibits excellent tensile and impact strength.
Inconel 718 Forged Threaded Tee has better mechanical properties at lower temperatures than Nimonic 90 Forged Fittings and Inconel X – 750 Forged Threaded Fittings.
Inconel 718 Forged Threaded Cross has been used for jet engine and high – speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners.Inconel 718 Forged Threaded Cap is also used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.
Inconel 718 Forged Threaded Fittings has excellent weldability compared to the nickel – base super alloys hardened by Aluminum and Titanium.
Meanwhile, these Inconel 718 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers.
Sachiya Steel International offers a wide range of Inconel 718 Threaded Forged Fittings to the clients, which are tested for its quality before being introduced in the market.
Inconel 718 Forged Threaded Elbow (UNS N07718) also exhibits excellent tensile and impact strength.
Inconel 718 Forged Threaded Tee has better mechanical properties at lower temperatures than Nimonic 90 Forged Fittings and Inconel X – 750 Forged Threaded Fittings.
Inconel 718 Forged Threaded Cross has been used for jet engine and high – speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners.Inconel 718 Forged Threaded Cap is also used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.
Inconel 718 Forged Threaded Fittings has excellent weldability compared to the nickel – base super alloys hardened by Aluminum and Titanium.
Meanwhile, these Inconel 718 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers.
Sachiya Steel International deals in an all-embracing range of Inconel Alloy 718 Tube to Female Pipes, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered.After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification.
Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming.
Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc.Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female PipesThese Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics.
Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts.
We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.Inconel 718 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 7180 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
