Sachiya Steel International offers a superior quality of Titanium Gr 2 Plates, Sheets and Coils, which has a number of outstanding features to offer such as dimensionally stable, fine finish, high material power, etc. Titanium Grade 2 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on. Superior quality steel is used by our specialists to make the offered collection of Titanium Grade 2 Coils following market set rules.
The offered range of Titanium Grade 2 Slating Coils is made by keeping in deliberation the demands of our respectable clienteles. Available in the company of us is a higher quality variety of Titanium Grade 2 Perforated Coils. Meanwhile, Grade 2 Titanium Plates are also being offered in different sizes and shapes to our customers. Grade 2 Titanium Coils is also used in Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, and Power Generation.
Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates
Grade 2 Titanium Slating Coils is widely used because it combines excellent formability and moderate strength with superior corrosion resistance. Grade 2 Titanium Perforated Coils offers high corrosion resistance in oxidizing, neutral and mildly reducing media, including chlorides. Ti Gr. 2 Sheets is commercially pure titanium, where oxidation of the surface is often required to prevent seizing on drawing. CP-Ti 1 grade shows a slightly better corrosion resistance than our Ti Gr. 2 Plates.
Titanium Gr 2 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM / ASME SB265 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Sachiya Steel International offers an enormous variety of Titanium Gr 5 Plates ,Sheets and Coils, where we provide these products in a number of dimensions and sizes for to cater the varied necessities of customers.
Our Titanium Grade 5 Coils is castable and is used “as cast” in sporting goods.These Titanium Grade 5 Slating Coils provides an outstanding grouping of high toughness and strength.
Titanium Grade 5 Perforated Coils has excellent tensile properties at ambient temp and a worthwhile creep resistance for up to 570 Deg F. Meanwhile, these Grade 5 Titanium Plates are also being offered in different sizes and shapes to our customers.Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates| Titanium Gr 5 Plates \ Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 PlatesCommercially Pure (CP), Grade 5 Titanium Coils, in its annealed state, is a ductile metal.
Resistance to fatigue and crack propagation is excellent of these Grade 5 Titanium Slatting Coils.
5 Sheets has a density of 4.51 g/cc – less than 60 % that of steel.
5 Plates should be emphasized that fabrication operations (annealing, descaling) can increase the impurity level unless particular care is taken.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Angle Other Products, which is stronger than Grade 1 and equally corrosion – resistant against most applications.
Titanium Grade 2 Angle is least used of the commercially pure titanium grades, but that does not make it any less valuable.
Titanium Grade 2 C-Channel can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F.Titanium Grade 2 Chain is not heat treatable, and is used for condensers & heat exchangers.
Titanium Grade 2 I-Beam is an alpha – beta alloy, which has better response than Ti Grade 5 when heat treating to high strength levels.
The oxide scale of Titanium Grade 2 H-Beam, in turn, presents a very good protective layer, preventing bulk from oxidation.
The oxidized layer of Titanium Grade 2 T-Beam provides a better protection than the use of argon or high vacuum.Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle |Grade 2 Titanium Angle has physical and mechanical properties equivalent to CP3 titanium.
Sachiya Steel International is a prominent manufacturer, trader and supplier of a vast collection of Titanium Gr 2 Round Bar.
Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium.
These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance in different hostile media.Titanium Grade 2 Threaded Bars as well offers superior strength and formability between grades 1 and 3.
Titanium Grade 2 Hollow Bars provides soaring corrosion resistance and a better operational array than aluminum.
By means of outstanding corrosion resistance, formability and moderate strength, Titanium Grade 2 Hexagonal Bars signifies the most extensively used form of titanium.Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar| Titanium Gr 2 Round Bar | Titanium Gr 2 Round BarMeanwhile, Titanium Grade 2 Triangular Bars are also being offered in different sizes and shapes to our customers.
Titanium Grade 2 Bars has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3 in terms of strength.This is partly due to low density and corrosion resistance of Titanium Grade 2 Rods which can be easily welded, hot and cold worked and machined.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium.
Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application.
Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability.
Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants.
For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight.Ti Alloy Gr.
2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium.
Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability.
Hot roll, forge and hot press, initial roughing for Titanium Grade 2 Ferrule Fittings is done at 86 Degree F to 122 Degree F (30 Degree C to 50 Degree C) higher than beta transits, Finish from 1499 Degree F to 1652 Degree F (815 Degree C to 900 Degree C).This heat treatment process is carried out after Titanium Grade 2 Double Ferrule Fittings has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high – strength product.
Annealing of Titanium Grade 2 Double Ferrule Fittings in air oxidizes the surface to a depth of 0.1 mm to 0.2 mm, depending on time and temperature of the treatment.
Titanium Grade 2 Female Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate.We also boast an Accredited Testing Laboratory for Grade 2 Titanium Tube Fittings which is unique within the multi – metal and plastic stockholding sector.
Most of the applications of Grade 2 Titanium Compression Fittings are in the chemical industries, where the most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.Titanium Gr 2 Tube to Female Pipes SpecificationsSpecifications:ASTM B381 ASME SB 381Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 4000 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
