Sachiya Steel International is one of the renowned Manufacture And Exporter of Stainless Steel 304 Tube to Female Pipes, which is second most common grade for food and surgical stainless steel uses, where addition of molybdenum prevents specific forms of corrosion. Stainless Steel 304 Tube Fittings is more resistant to carbide precipitation and can be used in the above temperature range.
Stainless Steel 304 Compression Fittings is also known as marine grade stainless steel due to its increased resistance to chloride corrosion compared to type 316. Solution Treatment (Annealing) – Heat to 1010 Degree C – 1120 Degree C and cool rapidly, where Stainless Steel 304 Female Connector Pipe Fittings cannot be hardened by thermal treatment. Of course, there are many industrial processes that require a higher level of resistance to corrosion than Stainless Steel 304 Ferrule Pipe Fittings can offer.
Stainless Steel 304 Tube to Female Pipes | Stainless Steel 304 Tube to Female Pipes | Stainless Steel 304 Tube to Female Pipes | Stainless Steel 304 Tube to Female Pipes | Stainless Steel 304 Tube to Female Pipes | Stainless Steel 304 Tube to Female Pipes | Stainless Steel 304 Tube to Female Pipes
Stainless Steel 304 Double Ferrule Pipe Fittings is commonly used in many industrial applications involving processing chemicals, as well as high – saline environments such as coastal regions and outdoor areas where de – icing salts are common. The carbon content in SS 304 Female Pipe Fittings is held to 0.08 % maximum, while the nickel content is increased slightly. Due to its non – reactive qualities, SS 304 Ferrule Pipe Fittings is also used in the manufacture of medical surgical instruments. SS 304 Double Ferrule Pipe Fittings have chemical and mechanical properties complying with excellent specifications.
|
Stainless Steel 304 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture And Exporter for high quality Stainless Steel 304 Tube to Union, which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range.
Components of Stainless Steel 304 Compression Fittings using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains.
This austenitic Stainless Steel 304 Union Tee has corrosion resistance greater than that provided by Stainless Steel 316 and Stainless Steel 316L, plus approximately twice the yield strength at room temperature.The additions of Silicon and Manganese have given Stainless Steel 304 Union Fittings a matrix to inhibit wear, galling, and fretting even in the annealed condition.
Higher strengths for Stainless Steel 304 Reducing Union are attainable through cold working the material and are still fully austenitic after severe cold – working.
In addition, Stainless Steel 304 Double Ferrule Fittings has very good mechanical properties at both elevated and sub – zero temperatures.Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to UnionAnd, unlike many austenitic stainless steels, SS UNS S30400 Bulkhead Union does not become magnetic when cold worked.
The benefit to the cold or hot work put into SS 304 Compression Fittings is added strength and hardness, and the wear resistance does not decrease noticeably.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304 Tube to Male Fittings, which does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.
The austenitic structure of our Stainless Steel 304 Tube Fittings also gives this grade excellent toughness, even down to cryogenic temperatures.
These Stainless Steel 304 Compression Fittings can be easily welded and processed by standard shop fabrication practices.
Our Stainless Steel 304 Ferrule Tube Fittings is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value.These Stainless Steel 304 Double Ferrule Tube Fittings performs well in fresh water service by means of low levels of chlorides (less than 100 ppm).
At higher chloride levels, our SS 304 Tube Fittings is susceptible to crevice corrosion and pitting.
Working temperatures of these Stainless Steel 304 Male Connector Fittings is up to 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) and are recommended for most hot working processes.Our SS 304 Compression Fittings contains between 16 percent chromium and 24 percent chromium and up to 35 percent nickel — as well as small amounts of carbon and manganese.
