Sachiya Steel International is reputed manufacturer & exporter of high quality Stainless Steel 304 Angle, which can be used in most diluted organic acids at moderate temperatures and in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures. Stainless Steel 304 Angle does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid service. Working temperatures of 2100 Degree F – 2300 Degree F (1149 Degree C – 1260 Degree C) in Stainless Steel 304 C-Channel are recommended for forging, upsetting and other hot working processes.
Stainless Steel 304 H-Beam contains high amounts of expensive ingredients, such as molybdenum and nickel. Stainless Steel 304 I-Beam is non – magnetic in all conditions and has excellent formability and weldability. The austenitic structure of Stainless Steel 304 T-Beam also gives excellent toughness, even down to cryogenic temperatures. Stainless Steel 304 Chain is a heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000 Degree F – 1600 Degree F temperature range.
Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle
SS 304 Angle is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800 Degree F – 1500 Degree F. SS 304 C-Channel has chemical and mechanical properties complying specifications. Such dual certified SS 304 H-Beam does not meet specification and may be unacceptable for high temperature applications. SS 304 I-Beam must be water quenched or fully annealed after working to re – attain maximum corrosion resistance.
SS 304 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 304 Angle |
: | 5mm to 9mm |
| SS 304 Channel |
: | 40mm*20mm~300mm*300mm |
| SS 304 Beam | : | 3″ thru 12.31″ |
| SS 304 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
304 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
Stainless Steel 304 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 304 Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
SS 304 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is reputed manufacturer & exporter of high quality Stainless Steel 304 Angle, which can be used in most diluted organic acids at moderate temperatures and in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures.
Stainless Steel 304 Angle does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid service.
Working temperatures of 2100 Degree F – 2300 Degree F (1149 Degree C – 1260 Degree C) in Stainless Steel 304 C-Channel are recommended for forging, upsetting and other hot working processes.Stainless Steel 304 H-Beam contains high amounts of expensive ingredients, such as molybdenum and nickel.
Stainless Steel 304 I-Beam is non – magnetic in all conditions and has excellent formability and weldability.
The austenitic structure of Stainless Steel 304 T-Beam also gives excellent toughness, even down to cryogenic temperatures.
Stainless Steel 304 Chain is a heat resistant, titanium stabilized, austenitic alloy that’s commonly used for service in the 1000 Degree F – 1600 Degree F temperature range.Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 Angle | Stainless Steel 304 AngleSS 304 Angle is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800 Degree F – 1500 Degree F. SS 304 C-Channel has chemical and mechanical properties complying specifications.
Sachiya Steel International is the top most Manufacture & Exporter in Stainless Steel 304 Screw , which has slightly improved corrosion resistance over stainless steel 321 screws in strongly oxidizing environments.
Stainless Steel 304 Hex Head Screws is also advantageous for high temperature service because of its good mechanical properties.
Stainless Steel 304 Socket Head Cap Screws offers higher creep and stress rupture properties than Stainless Steel 317 Screws, which might also be considered for exposures where sensitization and inter – granular corrosion are concerns.Stainless Steel 304 Socket Set Screws is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular – corrosion resistance.
Stainless Steel 304 Anchor Screws has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.Stainless Steel 304 Blind Rivet Screws is the higher carbon (0.04 – 0.10) version of the alloy, which does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid.
Stainless Steel 304 Concrete Screws was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
In most instances, the carbon content of Stainless Steel 304 Threaded Screws enables dual certification.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304 Buttweld Fittings, which is a molybdenum bearing austenitic stainless steel that provides improved corrosion resistance.
These Stainless Steel 304 Tee Pipe Fittings is non – magnetic in the annealed condition but may become slightly magnetic as a result of welding.
Stainless Steel 304 Stub End Pipe Fittings has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills.Increased levels of chromium, molybdenum and nickel in these Stainless Steel 304 End Cap, improve resistance to chloride pitting and general corrosion.
Resistance of Stainless Steel 304 Dish Cap Pipe Fittings increases with molybdenum alloy content, which is further resistant to sulphuric acid concentrations up to 5 percent at temperatures as high as 120 Degree F (49 Degree C).
At temperatures under 100 Degree F (38 Degree C), these Stainless Steel 304 Long Radius Elbow has excellent resistance to solutions of higher concentration.Stainless Steel 304 Buttweld Fittings | Stainless Steel 304 Buttweld Fittings | Stainless Steel 304 Buttweld Fittings | Stainless Steel 304 Buttweld Fittings | Stainless Steel 304 Buttweld Fittings | Stainless Steel 304 Buttweld Fittings | Stainless Steel 304 Buttweld Fittings | Stainless Steel 304 Buttweld FittingsHowever, service tests in Stainless Steel 304 Short Radius Elbow Pipe Fittings are recommended to account for the effects of specific operating conditions that may affect corrosion behavior.
In processes where condensation of Sulphur – bearing gases occurs, these Stainless Steel 304 Elbow Pipe Fittings is much more resistant to attack at the point of condensation than conventional alloy 316.Stainless Steel 304 Pipe Fittings SpecificationsSpecifications:ASTM A403 / ASME SA403Size:1/8” NB TO 48” NB.
Sachiya Steel International is one of the Leading Manufacture And Exporter for high quality Stainless Steel 304 Tube to Union, which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range.
Components of Stainless Steel 304 Compression Fittings using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains.
This austenitic Stainless Steel 304 Union Tee has corrosion resistance greater than that provided by Stainless Steel 316 and Stainless Steel 316L, plus approximately twice the yield strength at room temperature.The additions of Silicon and Manganese have given Stainless Steel 304 Union Fittings a matrix to inhibit wear, galling, and fretting even in the annealed condition.
Higher strengths for Stainless Steel 304 Reducing Union are attainable through cold working the material and are still fully austenitic after severe cold – working.
In addition, Stainless Steel 304 Double Ferrule Fittings has very good mechanical properties at both elevated and sub – zero temperatures.Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to Union | Stainless Steel 304 Tube to UnionAnd, unlike many austenitic stainless steels, SS UNS S30400 Bulkhead Union does not become magnetic when cold worked.
The benefit to the cold or hot work put into SS 304 Compression Fittings is added strength and hardness, and the wear resistance does not decrease noticeably.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 304 Forged Threaded Fittings, which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range.
Components of Stainless Steel 304 Forged Threaded Elbow using the combination of excellent corrosion restainless-steel-304-threaded-forged-fittings-supplier-exportersistance and high strength currently include pumps, valves and fittings, fasteners, cables.Stainless Steel 304 Forged Threaded Tee has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature.
The additions of Silicon and Manganese have given Stainless Steel 304 Forged Threaded Cross a matrix to inhibit wear, galling, and fretting even in the annealed condition.
Higher strengths of Stainless Steel 304 Forged Threaded Cap are attainable through cold working the material and are still fully austenitic after severe cold – working.Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded Fittings | Stainless Steel 304 Forged Threaded FittingsIn addition, Stainless Steel 304 Forged Threaded Fittings has very good mechanical properties at both elevated and sub – zero temperatures.
And, unlike many austenitic stainless steels, Stainless Steel 304 Forged Threaded Coupling does not become magnetic when cold worked.
The benefit to the cold or hot work put into Stainless Steel 304 Forged Threaded Union is added strength and hardness, and the wear resistance does not decrease noticeably.
