Sachiya Steel International is one of the well-established Manufacture and Exporter of Stainless Steel 347 Angle , which is not expected to migrate easily into soil or groundwater based upon its insoluble form. Nevertheless, if finely divided, Stainless Steel 347 Angle becomes mobile in water and contaminates soil and groundwater. The resistance to corrosion and staining, low maintenance, and familiar lustre make Stainless Steel 347 C-Channel an ideal material for many applications. Stainless Steel 347 H-Beam differs from carbon steel by the amount of chromium present. Unprotected Stainless Steel 347 I-Beam rusts readily when exposed to air and moisture.
Stainless Steel 347 T-Beam have 0.03 % carbon maximum, which are resistant to sensitization in short – term exposures or heat treatments. Stainless Steel 347 Chain often has slightly lower minimum strengths than standard stainless steels. 347 Stainless Steel Angle have 0.08 % maximum carbon and are suitable for use in non – welded parts and equipment; in case of welded applications these parts are used for light-gauge applications. 347 Stainless Steel C-Channel has lower cost; reduced corrosion resistance and resulting discoloration are acceptable.
Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle | Stainless Steel 347 Angle
347 Stainless Steel H-Beam manufactured from these solid products would be generally classified as non – hazardous. However, some metallic elements contained in 347 Stainless Steel I-Beam have been determined to be toxic and are subject to regulatory controls. In fact, 347 Stainless Steel T-Beam may persist in the environment for long periods, based upon its corrosion resistant, insoluble, and non – biodegradable properties.
SS 347 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 347 Angle |
: | 5mm to 9mm |
| SS 347 Channel |
: | 40mm*20mm~300mm*300mm |
| SS 347 Beam | : | 3″ thru 12.31″ |
| SS 347 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
347 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347 | 0.08 max | 2 max | 1 max | 0.045 max | 0.030 max | 17-20 | 10xC – 1.10 | 9.0-13.0 | 62.74 min |
Stainless Steel 347 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 347 Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
SS 347 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the prominent Manufacture and Exporter of Stainless Steel 347 Buttweld Fittings, which has excellent corrosion resistance properties.
Stainless Steel 347 Elbow Pipe Fittings is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel, which provides good strength and ductility when cold worked.Stainless Steel 347 Reducer is well suited to welding and forming and drawing, where the high strength grade of steel is available in several conditions or tempers.
Stainless Steel 347 Cross Pipe Fittings is used in the annealed and cold rolled conditions.
In the work – hardened condition, Stainless Steel 347 Tee Pipe Fittings develops higher tensile strength than the other stable austenitic grades.Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld Fittings | Stainless Steel 347 Buttweld FittingsStainless Steel 347 Bend has a tensile strength and minimum yield strength.
Stainless Steel 347 Stub End Pipe Fittings is a non – magnetic grade that is not harden able by heat treating, and is generally used in the annealed condition and is noted for its ease of fabrication and formability.Stainless Steel 347 End Cap Pipe Fittings is austenitic free – machining stainless steel which is used primarily for parts requiring machining, grinding or polishing.
Stainless Steel 347 Dish Cap was purposefully developed for ease of machining.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Angle, which is also characterized by high ductility and impact strength.
Stainless Steel 410 Angle is an austenitic stainless steel offering an excellent resistance to inter – granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 Degree to 1500 Degree F. Stainless Steel 410 C-Channel is well suited for applications related to chemical processing, heat exchangers, desalinization and more.
With its high levels of chromium, molybdenum, and nitrogen, Stainless Steel 410 H-Beam has excellent resistance to a wide range of chemicals.Stainless Steel 410 I-Beam is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process gicstreams.
Stainless Steel 410 T-Beam provides a cost – efficient alternative to nickel – based alloys and titanium.
Stainless Steel 410 Chain is alloyed with columbium – tantalum (referred to as niobium) and therefore allows good mechanical properties at high temperatures.Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle410 Stainless Steel Angle is known for their good thermal & electrical conductivities, high density, high melting point, and greater stiffness than steel.
These characteristics make 410 Stainless Steel Chain the ideal alloy for use in high temperatures, above 1100 Degree C , which is higher than steels and nickel – based super alloys.
Sachiya Steel International is one of the well-established Manufacture and Exporter of Stainless Steel 347 Tube to Female Pipes, which is a well – ordered arrangement of atoms that can best be pictured as spheres touching one another.
The major component of these Stainless Steel 347 Tube Fittings is iron, a metal that in its pure state is not much harder than copper.
Omitting very extreme cases, iron in its solid state is, like all other metals, polycrystalline — that is, our Stainless Steel 347 Compression Fittings consists of many crystals that join one another on their boundaries.
In these Stainless Steel 347 Female Connector Fittings, carbon is generally found in two forms, where either it is in solid solution in austenite and ferrite or it is found as carbide.Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female PipesOur Stainless Steel 347 Ferrule Fittings are ordered in planes, called lattices, which penetrate one another in specific ways.
For iron, the lattice arrangement in these Stainless Steel 347 Double Ferrule Fittings can best be visualized by a unit cube with eight iron atoms at its corners.
To change the properties of our SS 347 Tube Fittings is by adding alloying elements other than carbon that produce characteristics not achievable in plain carbon steel.
