Sachiya Steel International is one of the prominent Manufacture & exporter in Incoloy Alloy 20 Tube to Female Pipes, which is commercially pure (99.6 %) wrought nickel. Alloy 20 Tube Fittings is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Alloy 20 Compression Fittings can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Alloy 20 Female Connector Fittings. Hot working temperatures for Alloy 20 Ferrule Fittings should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F.
Annealing of Alloy 20 Double Ferrule Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature for Carpenter 20 Compression Tube Fittings can greatly influence the mechanical properties and structure of the material. When operating temperatures are expected to exceed 600 Degree F, carbon content in Carpenter 20 Female Connector Fittings becomes critical.
Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes
The lower carbon content of Carpenter 20 Tube Fittings makes the material resistant to graphitization and therefore less subject to embrittlement. Carpenter 20 Compression Fittings is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Carpenter 20 Ferrule Fittings has good mechanical properties and excellent resistance to many corrosive environments.
|
Alloy 20 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 4000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Alloy 20 | Ni | C | Mo | Mn | Si | Fe | Cu | S | P | Cr |
| 32 – 38 | 0.02 max | 2 – 3 | 1 – 2 | 0.7 max | Bal | 3 – 4 | 0.005 max | 0.02 max | 19 – 21 |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35000 , MPa – 241 | Psi – 80000 , MPa – 551 | 30 % |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Alloy 20 | N08020 | 2.4660 | Z2NCUD31-20AZ | NiCr20CuMo | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter of Incoloy Alloy 20 Tube to Male Fittings, where our complete product array ensures flawless finishing and is performance oriented.
Alloy 20 Tube Fittings resists chloride ion and pitting corrosion and its content of copper keeps it away from sulfuric acid.
Alloy 20 Compression Fittings has outstanding resistance to general corrosion, crevice corrosion and pitting in chemicals comprising sulfuric and chlorides, nitric and phosphoric acids.Alloy 20 Male Connector Fittings mainly shines in resisting corrosion to hot sulfuric acids when related to conventional alloys like SS 316.
Alloy 20 Ferrule Tube Fittings (UNS N08020) is alleviated by means of Columbium to minimalize carbide precipitation throughout welding.
Meanwhile, Alloy 20 Double Ferrule Tube Fittings is also being offered in different sizes and shapes to our customers, where we also offer the same at superlative rates.
This specification of Carpenter 20 Male Connector Fittings covers nominal wall and minimum wall seamless ferrite intended for high temperature service.Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male FittingsFor applications requiring maximum ductility, Carpenter 20 Compression Tube Fittings with low sulfur levels can be supplied by producers using ladle – refining techniques.
Sachiya Steel International offers a wide range of Incoloy Alloy 825 Tube to Female Pipes, where most of any commercial coolant may be used in the machining operations.
Incoloy 825 Tube Fittings has many different industrial applications, some of which include: Phosphoric acid evaporators, Propeller shafts, Tank trucks, and more.
Incoloy 825 Compression Fittings is an all – purpose project alloy, have good corrosion resistance of the acid and alkali metal property in both oxidation and reduction environments.Incoloy 825 Compression Tube Fittings has excellent resistance to sulfuric and phosphoric acids and resists inter – granular corrosion in the as – welded condition.
The commonly used welding methods work well with Incoloy 825 Female Connector Fittings, where matching alloy filler metal should be used.
Incoloy 825 Ferrule Fittings should not be used at temperatures where creep – rupture properties are design factors.
Incoloy 825 Double Ferrule Fittings is particularly useful in sulfuric & phosphoric acids, sulfur containing flue gases, sour gas, oil wells and sea water.Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes |Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female PipesAlloy 825 Tube Fittings is developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter of Alloy 20 Tube to Union Fittings, where we also deliver quality assured services.
These Alloy 20 Tube Fittings (UNS N08020) is a nickel – iron – chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulfuric acid.
Our Alloy 20 Compression Fittings’ corrosion resistance finds other uses in the chemical, food, pharmaceutical, power generation, and plastics industries.
These Alloy 20 Ferrule Fittings is also used in Mixing tanks, Heat exchangers, Process piping, and more.Our Alloy 20 Double Ferrule Fittings resists pitting and chloride ion corrosion and its copper content protects it from sulfuric acid better than a conventional stainless steel such as 316.
Meanwhile, these Alloy 20 Tube Fittings are also being offered in different sizes and shapes to our customers, where we also offer the same at best prices.
Carbide – forming elements of our Alloy 20 Union Tube Fittings raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements.Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union Fittings| Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union Fittings | Alloy 20 Tube to Union FittingsDeposition of complex and heavy organic compounds of these Carpenter 20 Tube Fittings in crude and heavy oil can cause a number of severe problems up to pipeline blocking.