Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy B3 Tube to Female Pipes, which is available in different sizes and shapes for our clients. Hastelloy B3 Tube Fittings was the first wrought, nickel – chromium – molybdenum material to alleviate concerns over welding (by virtue of extremely low carbon and silicon contents). As such, Hastelloy B3 Compression Tube Fittings was widely accepted in the chemical process and associated industries, and now has a track record of proven performance in a vast number of corrosive chemicals.
Like other nickel alloys, Hastelloy B3 Ferrule Tube Fittings is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride – bearing solutions (a form of degradation to which the austenitic stainless steels are prone). With its high chromium and molybdenum contents, Hastelloy B3 Double Ferrule Tube Fittings is able to withstand oxidizing and non – oxidizing acids, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides. Furthermore, Hastelloy B3 Female Connector Fittings is very resistant to sulphide stress cracking and stress corrosion cracking in sour, oilfield environments.
Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes
One of the chief attributes of Alloy B3 Female Connector Tube Fittings is their resistance to chloride – induced stress corrosion cracking. When traditional SS 316L has failed, and AL-6XN has reached its material design limit, then these Alloy B3 Tube Fittings is the best option.
|
Hastelloy B3 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – B30 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Hastelloy B3 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.02 max | 26.0-30.0 | 1.0 max | 0.10 max | 2.0 max | 0.040 max | 0.030 max | 1.0 max | 1.0 max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 9.2 g/cm3 | 1370 °C (2500 °F) | Psi – 51,000, MPa – 350 | Psi -1,10,000, MPa -760 | 40 % |
| STANDARD | UNS | WERKSTOFF NR. |
| Hastelloy B3 | N010675 | 2.4600 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For More Details
Visit Our Website : https://steeltube.co.in/
Contact us- +91 9769056007
email us - sales@sachiyasteel.com
Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Tube to Union Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain.
Hastelloy B3 Compression Fittings (UNS N10675) is a nickel – molybdenum alloy with excellent resistance to pitting, corrosion, and stress-corrosion cracking plus, thermal stability superior to that of alloy B-2.
Hastelloy B3 Tube Fittings has been primarily used for their resistance to corrosion in non – oxidizing environments such as HCl.
Hastelloy B3 Ferrule Fittings also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.Hastelloy B3 Double Ferrule Fittings can function under very high temperatures and severe mechanical stress, and also where high surface stability is required.
Meanwhile, these Hastelloy B3 Union Fittings are also being offered in customized sizes and shapes to our customers.
Early testing of Alloy B3 Compression Tube Fittings was focused on material in the annealed and age – hardened condition where the material was annealed at 1975 Degree F (1079 Degree C) and age – hardened at 1300 Degree F (704 Degree C) and Furnace cool (FC) to 1125 Degree F (607 Degree C).Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union Fittings | Hastelloy B3 Tube to Union FittingsFor this reason, a considerable development effort has been generated on Alloy B3 Union Tube Fittings in three other “very high strength” conditions.
Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Tube to Male Fittings, which has some admirable features to offer such as durable, fine finish, accurate dimensions, and so on.
Hastelloy B3 Tube Fittings has a special understanding deliberate to accomplish a level of thermal stability that is significantly higher to that of its forerunners.
Hastelloy B3 Compression Fittings is not suggested for use in the existence of cupric or ferric salts for the reason that these salts can source untimely failure.
Hastelloy B3 Male Connector Fittings has excellent oxidation and creep resistance, and has an unusual chemistry considered attaining superior thermal constancy than Alloy B-2, resulting in stress – free fabrication.Hastelloy B3 Ferrule Fittings (UNS N10675) has immense resistance to heat – affected and knife – line area attack.
Meanwhile, these Hastelloy B3 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.
A comparison of yield strengths for the very high strength conditions in Alloy B3 Male Connector Fittings is exposed along with that of the annealed and “standard” conditions.Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male Fittings | Hastelloy B3 Tube to Male FittingsAlloy B3 Tube Fittings, does not recommend use of highly cold worked and aged material because the increase in yield strengths is minimal and the susceptibility to hydrogen embrittlement in severe oil well conditions is increased.
Sachiya Steel International is a leading Manufacturer And Exporter of Hastelloy B3 Tube to Male Fittings, which has some admirable features to offer such as durable, fine finish, accurate dimensions, and so on.
Hastelloy B3 Tube Fittings has a special understanding deliberate to accomplish a level of thermal stability that is significantly higher to that of its forerunners.
Hastelloy B3 Compression Fittings is not suggested for use in the existence of cupric or ferric salts for the reason that these salts can source untimely failure.
Hastelloy B3 Male Connector Fittings has excellent oxidation and creep resistance, and has an unusual chemistry considered attaining superior thermal constancy than Alloy B-2, resulting in stress – free fabrication.Hastelloy B3 Ferrule Fittings (UNS N10675) has immense resistance to heat – affected and knife – line area attack.
Meanwhile, these Hastelloy B3 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.
A comparison of yield strengths for the very high strength conditions in Alloy B3 Male Connector Fittings is exposed along with that of the annealed and “standard” conditions.Alloy B3 Tube Fittings, does not recommend use of highly cold worked and aged material because the increase in yield strengths is minimal and the susceptibility to hydrogen embrittlement in severe oil well conditions is increased.