Sachiya Steel International is one of the prominent Manufacture and Exporter of quality Nickel Alloy 200 Angle And Other Nickel Alloy Products, where brazing requires appropriate silver – base brazing alloys. A great care must be taken to ensure that there are no stresses in this Nickel 200 Angle being silver brazed, since any stress can cause inter – granular penetration of the brazing material, and severe stress cracking. Applications for our Nickel 200 Chain have withstood the test of time, as they are still widely used and range from seawater system piping, condensers and heat exchangers in naval vessels, commercial shipping, multiple-stage flash desalination and power stations.
This Nickel 200 I-Beam have also been used as splash zone cladding on offshore structures and protective cladding on boat hulls, as well as for solid hulls themselves. Due to its ductility, our Nickel 200 T-Beam can be readily fabricated in a wide variety of product forms and fittings. This Nickel 200 H-Beam can be readily expanded into tube sheets for the manufacturing of shell and tube heat exchangers.
Nickel Alloy 200 Angle | Nickel Alloy 200 Angle | Nickel Alloy 200 Angle | Nickel Alloy 200 Angle | Nickel Alloy 200 Angle | Nickel Alloy 200 Angle | Nickel Alloy 200 Angle | Nickel Alloy 200 Angle | Nickel Alloy 200 Angle
Details of fabrication procedures for our Alloy 200 Angle includes general handling, cutting and machining, forming, heat treatment, preparing for welding, weld preparations. Thermocouples and resistors of this Alloy 200 Chain whose resistance is stable across changes in temperature contain alloy constantan, which consists of 45 % nickel. Our Alloy 200 I-Beam tends to be used as seamless tubing and expanded rather than welded into the tube plate.
Nickel 200 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B160 / ASME B160 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Nickel 200 Angle |
: | 5mm to 9mm |
| Nickel 200 Channel |
: | 40mm*20mm~300mm*300mm |
| Nickel 200 Beam | : | 3″ thru 12.31″ |
| Nickel 200 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
200 Nickel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Cu | Fe | Ni | S |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.25 max | 0.40 max | 99.00 min | 0.01 max |
Nickel Alloy 200 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1466 °C (2635 °F) | Psi – 67,000 , MPa – 432 | Psi – 21,500 , MPa – 148 | 45% |
Equivalent Grades for 200 Nickel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | BS | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | НП-2 | NA 11 | N-100M | Ni 99.2 |
Nickel 200 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known exporter and manufacturer of quality Nickel Alloy 201 Angle And Other Nickel Alloy Products, which is tailor-made as per the customer’s specification and end application.
Nickel 201 Angle is that is alloyed with a variety of elements in total amounts between 1.0 % and 50 % by weight to improve its mechanical properties.
Nickel 201 Chain is trusted for their various salient features like corrosion resistance, durability and high tensile strength.Nickel 201 I-Beam is a metal alloy consisting mostly of iron, in addition to small amounts of carbon, depending on the grade and quality of the steel.
Nickel 201 H-Beam are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and aluminum.
The process of making Nickel 201 T-Beam is highly specialized and complex.
Ni 201 Angle contain specified amounts of alloying elements — other than carbon and the commonly accepted amounts of manganese, copper, silicon, Sulphur, and phosphorus.Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 AngleNi 201 Chain also contains niobium for stabilization against sensitization and resultants inter – granular corrosion.
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 200 Wire, where chlorine additives would be an alternative.
Nickel 200 Coil Wire is a Nickel based alloy containing 47.5 % Nickel, 22 % Chromium and 18.5 % Iron, with small amounts of Cobalt, Molybdenum and Tungsten.
All hot – or cold – worked parts of Nickel 200 Wire should be annealed and rapidly cooled in order to restore the best balance of properties.
Carbide tools in Nickel 200 Wire should have smaller angles than high – speed tools and operating speeds can be higher.After 100 hours in petroleum coke, Nickel 200 is completely penetrated by carburization; whereas its specimens showed no carburization at all.
Useful Properties for Aircraft and Furnace Parts, Nickel 200 Wire is recommended especially for use in furnace applications.
Alloy 200 Wire has unusual resistance to oxidizing, reducing, and neutral atmospheres, where work hardening occurs whenever a tool makes a cut.Its uncommon resistance to oxidation, combined with exceptional heat resistance and fabricability, make Alloy 200 a widely sought – after blend in a number of industries.
Backed by rich industry experience, Sachiya Steel International are manufacturing, supplying and trading a vast variety of Nickel Alloy 200 Forged Threaded Fittings.
Typically, the elemental restrictions of both, Nickel 200 Forged Threaded Elbow (UNS N02200) and Nickel 201 Forged Fittings (UNS N02201) are combined into one and dual – certified chemistry resulting in a single alloy with the desired characteristics of both alloys.Other useful features of Nickel 200 Forged Threaded Tee are its magnetic and magneto strictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure.
Nickel 200 Forged Threaded Cross are often used in Synthetic Fiber Production, Processes where Sodium Hydroxide is used, Food Processing, and more.Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded Fittings | Nickel Alloy 200 Forged Threaded FittingsMeanwhile, these Nickel 200 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
Nickel 200 Forged Threaded Fittings has outstanding resistance to caustic alkalis up to and including the molten state.
In acid, alkaline and neutral salt solutions, Nickel 200 Forged Threaded Coupling shows good resistance, but in oxidizing salt solutions severe attack will occur.Nickel 200 Forged Threaded Union is considered resistant to potable water with up to about 200 mg / L chlorides at ambient temperatures, reducing to about 150 mg / L at 60 Degree C. Nickel 200 Forged Threaded Bushing is used for a variety of household and industrial applications such as screws, machinery parts, car headers, and food – handling equipment.
Nickel 200 Threaded Fittings SpecificationsSpecifications:ASTM B564 & ASME B564Size:1/8” NB to 4” NB (Socket weld & Screwed-Threaded)Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 2000 LBS, 9000 LBSType:Threaded Fittings Nickel 200 Forged Threaded Fittings Chemical CompositionGradeCMnSiSCuFeNi2000.15 max0.35 max0.35 max0.01 max0.25 max0.40 max99.0 minNickel 200 Threaded Fitting Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation2008.9 g/cm31446 °C (2635 °F)Psi – 67000 , MPa – 462Psi – 21500 , MPa – 14845 %Equivalent Grades for 200 Nickel Forged Threaded FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENNickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2 Nickel 200 Forged Threaded Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryFor more details:Web: https://steeltube.co.in/Phone: +91 9769056007E-Mail: [email protected]
Sachiya Steel International is one of the prominent Manufacture and Exporter of quality Nickel Alloy 200 Tube to Female Pipes, which is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid.
Nickel 200 Tube Fittings can easily be welded by gas – tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals.
The nickel and copper contents of Nickel 200 Compression Tube Fittings were in the approximate ratio which is now formally specified for the alloy.Nickel 200 Female Connector Fittings is a precipitation – harden able nickel – copper alloy that combines high strength, corrosion resistance and non – magnetic properties.
There is no need for post weld heat treatment in Nickel 200 Compression Fittings, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement.
Like most other nickel alloys, Nickel 200 Ferrule Tube Fittings is typically tough to machine and will work harden.Nickel 200 Double Ferrule Tube Fittings has excellent results which can be obtained if you make the correct choices for tooling and machining.
Alloy 200 Female Connector Fittings is a solid – solution binary alloy, which can be readily joined and fabricated.
