Sachiya Steel International is one of the well-known Manufacture And Exporter of Hastelloy B3 Wire which can be hot forged, hot rolled, hot upset, hot extruded, and hot formed. Hastelloy B3 Wire exhibits high resistance to chloride – induced pitting and crevice attack, and forms of corrosion to which the austenitic stainless steels are particularly prone. To assess the resistance of alloys to pitting and crevice attack, Hastelloy B3 Coil Wires is customary to measure their Critical Pitting Temperatures and Critical Crevice Temperatures in acidified ferric chloride, in accordance with the procedures defined in ASTM Standard.
Hastelloy B3 Wire represents the lowest temperatures at which pitting and crevice attack is encountered in this solution, within 72 hours. Wrought products of our Hastelloy B3 Wire are supplied in the Mill Annealed (MA) condition, unless otherwise specified. This solution annealing procedure in Hastelloy B3 Wires has been designed to optimize the alloy’s corrosion resistance and ductility.
Following all hot forming operations, our Alloy B3 Coil Wire should be re – annealed, to restore optimum properties. Alloy B3 Wire should also be re – annealed after any cold forming operations that result in an outer fiber elongation of 7 % or more. However, our Alloy B3 Coil Wire is more sensitive to strain and strain rates than the austenitic stainless steels, and the hot working temperature range is quite narrow.
|
Hastelloy B3 Wire Specifications
|
||
| Specifications | : | ASTM B335 ASME SB335 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | Fe | S | Cr | Mo | Ni | Ti |
| Hastelloy B3 | 0.01 max | 3.0 max | 0.10 max | 15 | 0.03 max | 1.5max | 28.5 | 65.0 min | 0.2 max |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Hastelloy B3 |
| STANDARD | WERKSTOFF NR. | UNS |
| Hastelloy B3 | 2.4600 | N10675 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well – known manufacturer and Exporter of Hastelloy B3 Angle And Other Hastelloy Products, which offers great resistance in the strong acidic and alkali media and prevents pitting, crevice corrosion and SCC.
Hastelloy B3 Angle also offers wide resistance to wet chloride gas, hypochlorite and chlorine dioxide media.
Hastelloy B3 C-Channel prevents the localized and inter – granular corrosion in the presence of strong acids such as sulphuric acid, phosphoric acid, hydrochloric acid, nitric acid and organic acid.
Hastelloy B3 Chain provides excellent corrosion resistance to the entire magnitudes of sulphuric acid up to 95 Degree C or 200 Degree F.For chloride concentrations about or above 0.1 % and of pH 2, Hastelloy B3 H-Beam is fit for use.
Hastelloy B3 I-Beam is suitable for use in the highest temperature media in FGD system and its components such as fan wheels, dampers, liquid spray and pipes.
Hastelloy B3 T-Beam produced by us is valued in the diverse industrial fields such as paper.
Sachiya Steel International offers a wide range of Hastelloy B3 Threaded Forged Fittings, where it is the duty of our team members to check these products for any kind of finishing flaw thereby attaining utmost contentment of the customers.
Hastelloy B3 Forged Threaded Elbow Fittings (UNS N10675) also has excellent resistance to pitting corrosion and to stress-corrosion cracking.
Hastelloy B3 Forged Threaded Tee Fittings also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media.
Hastelloy B3 Forged Threaded Cross Fittings is a nickel – molybdenum alloy with excellent resistance to pitting, corrosion and stress-corrosion cracking, plus thermal stability superior to that of alloy B-2.Hastelloy B3 Forged Threaded Cap Fittings has greatly improved structural stability compared with previous B-type alloys, leading to fewer concerns during welding, fabrication, and service.
Meanwhile, these Hastelloy B3 Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers.
Titanium nitrides and carbides in Hastelloy B3 Forged Threaded Coupling Fittings are visible in polished micro – specimens at magnifications of 50X or greater.Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged Fittings | Hastelloy B3 Threaded Forged FittingsHastelloy B3 Forged Threaded Union Fittings appear as small, randomly dispersed, angular – shaped inclusion, where the color varies from orange – yellow for the nitride to gray – lavender for the carbide.