Sachiya Steel International is a Leading Manufacture And Exporter Of Cupro Nickel 90 Wire. Some of the primary uses for Cupro Nickel 90 Wire include condensers as well as exchanger shells. Cupro Nickel 90 / 10 Wires has 2 % to 30 % nickel, high oxidation resistance and stress corrosion cracking resistance. Some common applications for Cupro Nickel 90 / 10 Coil Wires include: valves, pump components, fittings, flanges and various other marine hardware components. The inclusion of controlled quantities of iron and manganese also give Cupro Nickel 90 / 10 Wire an extraordinary resistance to general corrosion and stress cracking, as well as to erosion and impingement due to turbulent water containing air bubbles and silt flowing at high velocities.
Cupro Nickel 90 / 10 Coiled Electrode is highly resistant to corrosion in seawater because its electrode potential is adjusted to be neutral with regard to seawater. Cu-Ni 90 / 10 Wire is not recommended for usage in heavily polluted water containing sewage and industrial wastes. Cu-Ni 90 / 10 Wire with additions of manganese is important in electrical engineering.
Additions of iron significantly improve the resistance of Cu-Ni 90 / 10 Coil Wire to erosion corrosion in flowing seawater and other aggressive waters. Cu-Ni 90 / 10 Wire are a copper – based alloy developed as a cost – effective substitute for Cu-Ni 70 / 30 Wire. Cu-Ni 90 / 10 Wire is a strong, ductile material exhibiting good corrosion resistance.
|
Cupro Nickel 90/10 Wire Specifications
|
||
| Specifications | : | ASTM B206 / ASME SB206 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Cu-Ni 90/10 | Cu | Pb | Mn | Fe | Zn | Ni |
| 88.6 min | 0.05 max | 1.0 max | 1.8 max | 1 max | 9-11 max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.1 g/cm3 | 1443 °C (2430 °F) | Psi – 35,000, MPa – 241 | Psi -80,000, MPa -551 | 30 % |
| STANDARD | UNS | WERKSTOFF NR. |
| Cupro Nickel 90/10 | C70600 | 2.0872 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Cupro Nickel 90 Wire Mesh has some of the attractive characteristics such as excellent resistance to uniform corrosion, remarkable resistance to localized corrosion in chlorinated seawater, and higher erosion resistance than other copper alloys and steel.
This Cupro Nickel 90 / 10 Welding Wire Mesh still enjoy widespread use today not only for many navies but also in commercial shipping, floating production, storage and offloading vessels (FPSOs), and in multistage flash desalination.Our Copper Nickel 90 / 10 Netting Wire Mesh is excellent on hot and cold workability and is resistant towards atmospheric, brackish water, sea water and non – oxidizing acid corrosion.
This Cupro Nickel 90 / 10 Woven Wire Mesh resists corrosion by fast moving water, which is as well highly resistant to SCC.
Our Copper Nickel 90 / 10 Spring Steel Wire Mesh is a copper – nickel alloy with an alpha phase structure, where the cast structures have alpha dendrites that contain huge quantities of nickel content.These Cupro Nickel 90 / 10 Fencing Wire Mesh has undergone tests that indicate it has excellent antimicrobial properties.
Our Cu-Ni 90 / 10 Wire Mesh is widely used in marine service, offshore platform sea water piping, tidewater power plants, desalination plants, oil refineries, and in the chemical process industry.
Of all commercial copper alloys, these Copper Nickel 90 / 10 Wire Mesh offers the best resistance to aqueous corrosion.
Sachiya Steel International is a known manufacturer and exporter of Cupro Nickel 90 Angle And Other Cupro Nickel Products, which has good cold – and hot – working properties and is readily weld able.
The reasons are mostly attributed to the composition and production of Cupro Nickel 90 / 10 Angle composites, occurrence of erosion – corrosion and corrosion damage in polluted waters.
This information provides a review of the corrosion and befouling resistance of Cupro Nickel 90 / 10 Chain based on laboratory test data and documented experience of the alloy in marine environments.Cupro Nickel 90 / 10 C-Channel are used in forming wires that are typically used for low-temperature applications such as heating cables.
The resistance to soil erosion and abrasive fluids of Cupro Nickel 90 / 10 H-Beam is incomparable in the aqueous conditions.
Cupro Nickel 90 / 10 I-Beam offers excellent resistance to stress corrosion, erosion, and befouling in seawater and brackish water, excellent fabrication and welding properties, a high resistance to hydrogen embrittlement and the retention of mechanical properties down to cryogenic temperatures.Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 AngleHowever, the alloying elements in Cupro Nickel 90 / 10 T-Beam do not become homogenized even by repeated thermal and mechanical treatments.
Cu-Ni 90 / 10 Angle ranging in composition are commonly specified in heat exchanger or condenser tubes in a wide variety of marine applications.
Sachiya Steel International offers Cupro Nickel 90 Round Bar, which is factory – made by our expert workmen who stand by factory required necessities of all the clienteles.
Cu-Ni 90 / 10 Square Bars is generally used in Fish crates for aquaculture, Hydraulic lines, Heat condensers and exchangers, Desalination units, Tubes for ships and power plants, Sea water pipework, Offshore fire water systems, and so on.Cupro Nickel 90 / 10 Flat Bars is a copper – based alloy industrialized as an economical substitute for Cu Ni 70 / 30 Round Bars.
Meanwhile, these Copper Nickel 90 / 10 Threaded Bars (UNS C70600) are an alloy of nickel, copper and firming components such as manganese and iron.
Meanwhile, Cu-Ni 90 / 10 Hollow Bars are also being offered in different sizes and shapes to our customers.Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round BarCupro Nickel 90 / 10 Hexagonal Bars are alloys of copper (base metal with the largest individual content) and nickel with or without other elements, whereby the zinc content may not be more than one percent.
For many decades, Copper Nickel 90 / 10 Triangular Bars have extensively been used as a piping material for seawater systems in shipbuilding, offshore, and desalination industries.
Cu-Ni 90 / 10 Bars for marine use were developed for naval applications in the early part of the century with a view to improving the corrosion resistance of condenser tubes and seawater piping.