Sachiya Steel International is one of the Leading Manufacture of Stainless Steel 446 Tube to Union Fittings, which should be in the fully solution treated condition prior to welding. Our Stainless Steel 446 Tube Fittings is a cobalt base super – alloy with a unique combination of high temperature strength and oxidation resistance, along with adequate ductility after prolonged exposure to the 1400 Degree F – 1600 Degree F temperature range. These Stainless Steel 446 Compression Fittings has an inherent advantage over the nickel base grades in high temperature creep.
Our Stainless Steel 446 Union Fittings is solid solution strengthened by a 14 % tungsten addition, which is further sensitive to strain age cracking during welding. These Stainless Steel 446 Union Tube Fittings is readily fabricated, being welded by both manual and automatic methods including electron beam, gas tungsten arc and resistance welding. In our 446 Stainless Steel Tube Fittings, gas tungsten arc welding is normally carried out using argon shielding gas. These 446 Stainless Steel Compression Fittings is normally welded in the annealed condition 2100 Degree F, and then rapid cool.
Stainless Steel 446 Tube to Union Fittings | Stainless Steel 446 Tube to Union Fittings | Stainless Steel 446 Tube to Union Fittings | Stainless Steel 446 Tube to Union Fittings | Stainless Steel 446 Tube to Union Fittings | Stainless Steel 446 Tube to Union Fittings | Stainless Steel 446 Tube to Union Fittings | Stainless Steel 446 Tube to Union Fittings
After welding, the assembly of our 446 Stainless Steel Union Fittings may be aged 8 hours at 1470 Degree F, and then air cool. Repair welding components of these SS 446 Union Fittings may be done in the age hardened condition, where sound welds can be made by the resistance and electron beam methods.
Stainless Steel 446 Tube to Union Specifications |
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 446 Tube To Union Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| SS 446 | 0.2 max | 1.5 max | 0.75 max | 0.04 max | 0.030 max | 23 – 30 | – | 0.50 max | 0.10 – 0.25 | Balance |
Stainless Steel 446 Tube To Union Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.5 g/cm3 | 1510 °C (2750 °F) | Psi – 75,000 , MPa – 485 | Psi – 40,000 , MPa – 275 | 20 % |
Equivalent Grades for 446 Stainless Steel Ferrule Fitting Tube To Union
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 446 | 1.4762 | S44600 | – | – | – | – | – |
SS 446 Tube To Union Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Contact:
D-2, Office no. 3,
Gr. Floor, Bharat Nagar Society,
Grant Road (E), Mumbai - 400007
Tel: +91 9769056007
Email: [email protected]
For More Information Visit Our Website : Sachiya Pipe Fittings
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 446 Tube to Female Pipes, which is the strongest of the alloys, useful for continuous service to 1800 Degree F. Deposits of these Stainless Steel 446 Tube Fittings have outstanding resistance to wear, erosion, creep, thermal fatigue and oxidation.
Because of its long and widespread use, Stainless Steel 446 Compression Fittings has been the subject of many investigations to determine its properties over a wide range of conditions, thus making it an unusually well characterized material.
When exposed for prolonged periods at intermediate temperatures, these Stainless Steel 446 Female Connector Fittings exhibits a loss of room temperature ductility in much the same fashion as other super – alloys.Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female PipesStainless Steel 446 Ferrule Tube Fittings is welded using gas tungsten arc, gas metal arc, shielded metal arc, electron beam and resistance welding, where submerged arc welding is not recommended.
These Stainless Steel 446 Double Ferrule Tube Fittings is used good for joint fit-up, minimum restraint, low inter – pass temperature and cool rapidly from welding.
For maximum ductility, fabricated components of 446 Stainless Steel Female Connector Fittings should be annealed 2150 Degree F – 2250 Degree F, and then rapid cool.
The principal application of these 446 Stainless Steel Ferrule Tube Fittings is for hard – facing turbine blade interlock surfaces, which are further available in straight cut lengths or layer wound spools.Stainless Steel 446 Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 446 Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN446min.–––––23.0––0.10max.0.21.50.750.0400.03030.0–0.500.25 Stainless Steel 446 Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max4464852752092201 Stainless Steel 446 Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C44677502009.911.411.624.928.7460570 Equivalent Grades for 446 Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormSwedish SSJapanese JISBSEnNoName446S44600––1.4762 / 1.4763––– SS 446 Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer and exporter of Stainless Steel 446 Tube to Male Fittings, which is available in different specifications as per clients’ requirements.
The microstructure of Stainless Steel 446 Tube Fittings consists of about 50 % of the hard intermetallic Laves phase dispersed in a softer cobalt alloy matrix.
Stainless Steel 446 Compression Fittings provides the material with exceptional metal to metal wear bearing properties, where follow annealing by stabilization and aging treatments.
The high levels of molybdenum and chromium present in Stainless Steel 446 Male Connector Fittings favors the formation of the high hardness phase and also provide a high level of corrosion resistance.The phase of Stainless Steel 446 Ferrule Fittings itself has a 2840 Degree F melting point, which helps to retain its wear resistance to high temperatures.
Mechanical properties of Stainless Steel 446 Double Ferrule Fittings vary with the solution and aging treatments, where shapes are available per customer requirements.
Higher solution temperatures of 446 Stainless Steel Male Connector Fittings result in better room temperature ductility and elevated temperature creep – rupture strength.Lower solution temperatures in 446 Stainless Steel Tube Fittings give higher tensile strengths, where short time hot tensile strength is inferior at temperatures up to 1350 Degree F. The creep – rupture strength of 446 Stainless Steel Compression Fittings is superior to that of alloy 718 at temperatures above 1150 Degree F – 1200 Degree F.Stainless Steel 446 Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass SS 446 Tube To Male Fittings Chemical Composition GradeCMnSiPSCrMoNiNFeSS 4460.2 max1.5 max0.75 max0.04 max0.030 max23 – 30–0.50 max0.10 – 0.25Balance Stainless Steel 446 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75,000 , MPa – 485Psi – 40,000 , MPa – 27520 % Equivalent Grades for 446 Stainless Steel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600––––– SS 446 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 446 Tube to Male Fittings, which is available in different specifications as per clients requirements.
The microstructure of Stainless Steel 446 Tube Fittings consists of about 50 % of the hard intermetallic Laves phase dispersed in a softer cobalt alloy matrix.
Stainless Steel 446 Compression Fittings provides the material with exceptional metal to metal wear bearing properties, where follow annealing by stabilization and aging treatments.The high levels of molybdenum and chromium present in Stainless Steel 446 Male Connector Fittings favors the formation of the high hardness phase and also provide a high level of corrosion resistance.
The phase of Stainless Steel 446 Ferrule Fittings itself has a 2840 Degree F melting point, which helps to retain its wear resistance to high temperatures.
Mechanical properties of Stainless Steel 446 Double Ferrule Fittings vary with the solution and aging treatments, where shapes are available per customer requirements.Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male FittingsHigher solution temperatures of 446 Stainless Steel Male Connector Fittings result in better room temperature ductility and elevated temperature creep – rupture strength.
Lower solution temperatures in 446 Stainless Steel Tube Fittings give higher tensile strengths, where short time hot tensile strength is inferior at temperatures up to 1350 Degree F. The creep – rupture strength of 446 Stainless Steel Compression Fittings is superior to that of alloy 718 at temperatures above 1150 Degree F – 1200 Degree F.Stainless Steel 446 Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 446 Tube To Male Fittings Chemical CompositionGradeCMnSiPSCrMoNiNFeSS 4460.2 max1.5 max0.75 max0.04 max0.030 max23 – 30–0.50 max0.10 – 0.25BalanceStainless Steel 446 Tube To Male Fittings Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75,000 , MPa – 485Psi – 40,000 , MPa – 27520 %Equivalent Grades for 446 Stainless Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600––––– SS 446 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 446 Pipe Fittings, which is subject to stress corrosion cracking in hot, a concentrated caustic alkali.
When stainless steel compounds are present as well, or for ammonium hydroxide service, these Stainless Steel 446 Compression Pipe Fittings is suggested.
To avoid stress corrosion cracking, our Stainless Steel 446 Ferrule Pipe Fittings fabrication should be fully stress relieved prior to use.A minimum treatment of 1650 Degree F for 1 hour is suggested in our SS 446 Double Ferrule Pipe Fittings, but 1800 Degree F – 1850 Degree F for 1 hour preferred.
This Stainless Steel 446 Accessories is a high strength nickel base super – alloy used for cryogenic temperatures up to long term service at 1200 Degree F. Our 446 Stainless Steel Compression Pipe Fittings is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe FittingsThese 446 Stainless Steel Ferrule Pipe Fittings will show a contraction after precipitation hardening, where annealing is done at 1700 Degree F – 1850 Degree F, and then air cool or faster.
Our 446 Stainless Steel Double Ferrule Pipe Fittings is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy.
These 446 SS Accessories was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments.Stainless Steel 446 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM A182 ASME SA 182Tube Size:1/16”OD to 2”OD, 2mm OD to 50mm ODThread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 446 Pipe Fittings Chemical CompositionGradeCMnSiPSCrMONiN446min.–––––23.0––0.10max.0.201.50.750.0400.03030.00.500.25Stainless Steel 446 Accessories Mechanical PropertiesGradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max4464852752092201Equivalent Grades for 446 Stainless Steel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600SUS 446––––SS 446 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
