Sachiya Steel International is one of the Leading Manufacturer And Exporter of Titanium Gr 2 Tube to Male Fittings, where strong reducing media may cause heavy corrosion. Titanium Grade 2 Tube Fittings has the highest formability, along with the highest strength and moderate formability. Titanium Grade 2 Compression Fittings shares many of the same qualities as Grade 1 titanium, but it is slightly stronger, but both are equally corrosion resistant. Comparable to austenitic stainless steel, the low speed, heavy feed rate and abundant cutting fluid, Employ safety measures of Titanium Grade 2 Ferrule Fittings are excellent because titanium is extremely combustible.
This mixture has a solid solubility which varies dramatically with temperature, allowing Titanium Grade 2 Double Ferrule Fittings to undergo precipitation strengthening. Titanium Grade 2 Male Connector Fittings is alloyed titanium and is considered to be an alpha – beta alloy. Annealing of Grade 2 Titanium Tube Fittings can be performed under high vacuum, under argon after careful purging of the recipient or in air. This combination of properties makes Grade 2 Titanium Compression Fittings a candidate for a large variety of chemical and marine as well as aerospace and medical applications.
Titanium Gr 2 Tube to Male Fittings | Titanium Gr 2 Tube to Male Fittings | Titanium Gr 2 Tube to Male Fittings | Titanium Gr 2 Tube to Male Fittings | Titanium Gr 2 Tube to Male Fittings | Titanium Gr 2 Tube to Male Fittings | Titanium Gr 2 Tube to Male Fittings | Titanium Gr 2 Tube to Male Fittings
Grade 2 Titanium Male Connector Fittings is the most commonly used grade of titanium, where further it has good weldability and is easily formable. Grade 2 Titanium Ferrule Fittings is classified by its corrosion resistance, ductility, and strength, where low cutting speeds, heavy feed rates, sharp tools, and ample cutting fluid are prescribed.
Titanium Gr 2 Tube to Male Fittings Specifications |
||
| Specifications | : | ASTM B381 ASME SB381 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B381 ASTM B381 |
| Pressure Rating | : | 6000PSI for Titanium , 300/1000/3000PSI for Brass |
Titanium Alloy Gr 2 Tube To Male Fittings Chemical Composition
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max | – | – |
Titanium Gr 2 Tube To Male Fittings Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
Equivalent Grades for Gr 2 Titanium Ferrule Fitting Tube To Male Fittings
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 2 | 3.7035 | R50400 |
Alloy Gr 2 Tube To Male Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Sheet Plates
Sachiya Steel International is a Leading Manufacturer And Exporter of Titanium Gr 2 Tube to Male Fittings, where strong reducing media may cause heavy corrosion.
Titanium Grade 2 Tube Fittings has the highest formability, along with the highest strength and moderate formability.
Titanium Grade 2 Compression Fittings shares many of the same qualities as Grade 1 titanium, but it is slightly stronger, but both are equally corrosion resistant.
Comparable to austenitic stainless steel, the low speed, heavy feed rate and abundant cutting fluid, Employ safety measures of Titanium Grade 2 Ferrule Fittings are excellent because titanium is extremely combustible.This mixture has a solid solubility which varies dramatically with temperature, allowing Titanium Grade 2 Double Ferrule Fittings to undergo precipitation strengthening.
Titanium Grade 2 Male Connector Fittings is alloyed titanium and is considered to be an alpha – beta alloy.
This combination of properties makes Grade 2 Titanium Compression Fittings a candidate for a large variety of chemical and marine as well as aerospace and medical applications.Grade 2 Titanium Male Connector Fittings is the most commonly used grade of titanium, where further it has good weldability and is easily formable.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of a high quality Titanium Gr.2 Tube to Union Fittings, which has some excellent features to offer such as fine finish, dimensionally stable, high material strength, and more.
Available with us is a superior quality assortment of Titanium Grade 2 Tube Fittings.
The offered spectrum of Titanium Grade 2 Compression Fittings is manufactured keeping in consideration the requirements of our respectable customers.
High quality steel is utilized by our experts to manufacture the offered range of Titanium Grade 2 Ferrule Fittings following industry set guidelines.Titanium Grade 2 Double Ferrule Fittings also has some other exceptional features to offer such as durable, light weight, high tensile strength and more.
Grade 2 Titanium Tube Fittings has outstanding corrosion resistance and useful strength (similar to austenitic stainless steels) at low density.Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings Grade 2 Titanium Compression Fittings resist in contact with salt water and marine atmosphere, oxidizing acids, chlorides (in presence of water).
Grade 2 Titanium Ferrule Fittings has good corrosion resistance in a wide variety of acids, alkali, and industrial atmospheres.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium.
Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability.
Hot roll, forge and hot press, initial roughing for Titanium Grade 2 Ferrule Fittings is done at 86 Degree F to 122 Degree F (30 Degree C to 50 Degree C) higher than beta transits, Finish from 1499 Degree F to 1652 Degree F (815 Degree C to 900 Degree C).This heat treatment process is carried out after Titanium Grade 2 Double Ferrule Fittings has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high – strength product.
Annealing of Titanium Grade 2 Double Ferrule Fittings in air oxidizes the surface to a depth of 0.1 mm to 0.2 mm, depending on time and temperature of the treatment.
Titanium Grade 2 Female Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate.We also boast an Accredited Testing Laboratory for Grade 2 Titanium Tube Fittings which is unique within the multi – metal and plastic stockholding sector.
Most of the applications of Grade 2 Titanium Compression Fittings are in the chemical industries, where the most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.Titanium Gr 2 Tube to Female Pipes SpecificationsSpecifications:ASTM B381 ASME SB 381Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 4000 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Sachiya Steel International offers a superior quality of Titanium Gr 2 Plates, Sheets and Coils, which has a number of outstanding features to offer such as dimensionally stable, fine finish, high material power, etc.
Titanium Grade 2 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on.
Superior quality steel is used by our specialists to make the offered collection of Titanium Grade 2 Coils following market set rules.The offered range of Titanium Grade 2 Slating Coils is made by keeping in deliberation the demands of our respectable clienteles.
Available in the company of us is a higher quality variety of Titanium Grade 2 Perforated Coils.
Meanwhile, Grade 2 Titanium Plates are also being offered in different sizes and shapes to our customers.
Grade 2 Titanium Coils is also used in Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, and Power Generation.Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 PlatesGrade 2 Titanium Slating Coils is widely used because it combines excellent formability and moderate strength with superior corrosion resistance.
Sachiya Steel International is a prominent manufacturer, trader and supplier of a vast collection of Titanium Gr 2 Round Bar.
Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium.
These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance in different hostile media.Titanium Grade 2 Threaded Bars as well offers superior strength and formability between grades 1 and 3.
Titanium Grade 2 Hollow Bars provides soaring corrosion resistance and a better operational array than aluminum.
By means of outstanding corrosion resistance, formability and moderate strength, Titanium Grade 2 Hexagonal Bars signifies the most extensively used form of titanium.Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar| Titanium Gr 2 Round Bar | Titanium Gr 2 Round BarMeanwhile, Titanium Grade 2 Triangular Bars are also being offered in different sizes and shapes to our customers.
Titanium Grade 2 Bars has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3 in terms of strength.This is partly due to low density and corrosion resistance of Titanium Grade 2 Rods which can be easily welded, hot and cold worked and machined.
