Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 625 Pipe Fittings, Accessories, which has excellent corrosion and fatigue resistance in a wide variety of corrosive environments including seawater and industrial acids. Inconel 625 Compression Pipe Fittings is often used in High heat, Turbine engine components and fuel systems. Inconel 625 Compression Fittings in the soft annealed condition are characterized by good resistance to alkalis and organic acids, along with good mechanical properties. During cold working, Inconel 625 Ferrule Pipe Fittings work hardens more rapidly than traditional austenitic stainless steel.
In the nuclear field, Inconel 625 Double Ferule Pipe Fittings may be used for reactor – core and control – rod components in nuclear water reactors. Alloy 625 Compression Pipe Fittings may be forged or hot worked providing temperature is maintained in the range of about 1800 Degree F – 2150 Degree F. Consumable electrode re – melting procedures may be used to further refine Alloy 625 Compression Fittings, where further chloride stress – corrosion cracking resistance is excellent.
Inconel 625 Pipe Fittings | Inconel 625 Pipe Fittings | Inconel 625 Pipe Fittings | Inconel 625 Pipe Fittings | Inconel 625 Pipe Fittings | Inconel 625 Pipe Fittings | Inconel 625 Pipe Fittings
These Alloy 625 Ferrule Pipe Fittings is often used for Chemical Processing, such as in equipment handling both oxidizing and reducing acids, super – phosphoric acid production, etc. Alloy 625 Double Ferrule Pipe Fittings is also used for components exposed to flue gas or in flue gas desulfurization plants. Service temperatures of these Inconel 625 Accessories can range from cryogenic to 980 Degree C (1800 Degree F).
Inconel 625 Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM B166 ASME SB 166 |
| Size | : | 1/16″ – 2″ |
| Ends | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 6250 Psi, 10000 Psi |
| Threads | : | NPT , BSPT, BSPP |
Inconel 625 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 625 |
0.10max | 0.50 max | 0.50 max | 0.015max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
Alloy 625 Accessories Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Equivalent Grades for 625 Inconel Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 625 |
2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb |
Alloy 625 Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Pipe Fittings
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 625 Tube to Male Fittings, which provides excellent corrosion resistance in a wide variety of severe corrosive environments due to its high alloy content.
These Inconel 625 Tube Fittings in the soft annealed condition are characterized by immunity to chloride – induced stress corrosion cracking.
Because the alloy is developed to retain high strength at elevated temperatures, our Inconel 625 Compression Fittings resists deformation at hot-working temperatures and higher loads are required to cause the material to deform.Product and technology applications of these Inconel 625 Male Connector Fittings include: Chemical process equipment, Engine thrust – reverser systems, Specialized seawater equipment, Turbine shroud rings, and Jet engine exhausts systems.
Its high strength enables our Inconel 625 Ferrule Fittings to be used, for example, in thinner – walled vessels or tubing than possible by means of other materials, thus improving heat transfer and saving weight.These Inconel 625 Double Ferrule Fittings is resistant to inter – granular corrosion even in the welded condition, where pitting and crevice corrosion are prevented by molybdenum.
Our Inconel 625 Compression Tube Fittings is often used for Aerospace Components, such as in bellows and expansion joints, jet engine exhaust systems, ducting systems, engine thrust – reversers and turbine shroud rings.
These Alloy 625 Tube Fittings is as well used in components where exposure to sea water and high mechanical stresses are required.Inconel 625 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for Brass Inconel Alloy 625 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiCrInconel 6250.10 max0.50 max0.50 max0.015max–5.0 max58.0 min20.0 – 23.0 Inconel 625 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6258.4 g/cm31350 °C (2460 °F)Psi – 1,35,000 , MPa – 930Psi – 75,000 , MPa – 51742.5 % Equivalent Grades for 625 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6252.4856N06625NCF 625NA 21ХН75МБТЮNC22DNB4MNiCr22Mo9NbNiCr23Fe Alloy 625 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment.
The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on.
Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters.These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.
Inconel 601 Double Ferrule Pipe Fittings has outstanding resistance to high temperature oxidation, where Annealed Heat Treatment can be conducted up to 2100 Degree F (1150 Degree C).
In the power – generation field, these Alloy 601 Compression Fittings is used for super – heater tube supports, ash – handling systems, and grid barriers.Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe FittingsAlloy 601 Compression Pipe Fittings is more difficult to machine than stainless steel 304, which is also used for igniters and diffuser assembles in gas turbines for aerospace applications.
The oxidation of these Alloy 601 Ferrule Pipe Fittings was performed in air, in the temperature range 1000 Degree C – 1150 Degree C, during 90 h, where the kinetic results show that the parabolic behavior is always followed in this temperature rangeInconel 601 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B166 ASME SB 166Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 6010 Psi, 10000 PsiThreads:NPT , BSPT, BSPPInconel 601 Pipe Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6010.10 max1.00 max0.50 max0.015max1.00 maxBalance58.0 – 63.021.0 – 25.0Alloy 601 Accessories Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6018.1 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530 %Equivalent Grades for 601 Inconel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23FeAlloy 601 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 600 Pipe Fittings, which is non – magnetic and has excellent mechanical properties.
Our Inconel 600 Compression Fittings is highly resistant to chloride – ion stress – corrosion cracking due to the high nickel content.
These Inconel 600 Compression Pipe Fittings is a Nickel – Chromium – Iron alloy with good corrosion resistance, oxidation resistance, and high strength at high temperatures.
Controlled chemical composition limits of our Inconel 600 Ferrule Pipe Fittings are applied in the nuclear industry to eliminate the risk of stress corrosion cracking by high purity water containing chloride ions.For these Inconel 600 Double Ferrule Pipe Fittings, the temperature range in between 1600 Degree F to 2250 Degree F (870 Degree C to 1230 Degree C) is the normal hot working temperature range.
Our Alloy 600 Compression Pipe Fittings is a superior choice for vacuum furnace fixtures and heat treat furnace components and fixtures.
Since the rate of cooling has no effect on the softening, these Alloy 600 Compression Fittings may be water quenched or air cooled.Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe FittingsAnnealing of our Alloy 600 Ferrule Pipe Fittings without excessive grain growth can be performed at 1850 Degree F for 15 minutes at temperature.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 625 Tube to Male Fittings, which provides excellent corrosion resistance in a wide variety of severe corrosive environments due to its high alloy content.
These Inconel 625 Tube Fittings in the soft annealed condition are characterized by immunity to chloride – induced stress corrosion cracking.
Because the alloy is developed to retain high strength at elevated temperatures, our Inconel 625 Compression Fittings resists deformation at hot-working temperatures and higher loads are required to cause the material to deform.Product and technology applications of these Inconel 625 Male Connector Fittings include: Chemical process equipment, Engine thrust – reverser systems, Specialized seawater equipment, Turbine shroud rings, and Jet engine exhausts systems.
Its high strength enables our Inconel 625 Ferrule Fittings to be used, for example, in thinner – walled vessels or tubing than possible by means of other materials, thus improving heat transfer and saving weight.
These Inconel 625 Double Ferrule Fittings is resistant to inter – granular corrosion even in the welded condition, where pitting and crevice corrosion are prevented by molybdenum.Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male Fittings | Inconel Alloy 625 Tube to Male FittingsOur Inconel 625 Compression Tube Fittings is often used for Aerospace Components, such as in bellows and expansion joints, jet engine exhaust systems, ducting systems, engine thrust – reversers and turbine shroud rings.
These Alloy 625 Tube Fittings is as well used in components where exposure to sea water and high mechanical stresses are required.Inconel 625 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for BrassInconel Alloy 625 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6250.10 max0.50 max0.50 max0.015max–5.0 max58.0 min20.0 – 23.0Inconel 625 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6258.4 g/cm31350 °C (2460 °F)Psi – 1,35,000 , MPa – 930Psi – 75,000 , MPa – 51742.5 %Equivalent Grades for 625 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6252.4856N06625NCF 625NA 21ХН75МБТЮNC22DNB4MNiCr22Mo9NbNiCr23FeAlloy 625 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
