Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Flanges, which has some great features such as fine finishing, corrosion resistant, easy to fit and more. Inconel 601 Slip On Raised Flanges (UNS N06601) are used in Radiant tubes, Strand annealing tubes, Steam super-heater tube supports, and more. Some of the great properties that draw users to Inconel 601 Threaded Flanges include: good aqueous corrosion resistance, outstanding mechanical strength, and more. Inconel 601 Weld Neck Raised Flanges is formed using all conventional techniques.
For maximum oxidation resistance, Inconel 601 Blind Flanges should be welded with matching composition 601 alloy GTAW wire. Inconel 601 Socket Weld Flanges develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. Inconel 601 Ring Joint Type Flanges is often used in thermal processing equipment – fixtures, baskets, trays, radiant tubes, flame shields, muffles, retorts, woven wire conveyers, electrical resistance heating wires and burner nozzles. Further important applications of Inconel 601 Spectacle Blind Flanges are to be found in the pollution control, aerospace – where it is used in jet-engine igniters – and power generation industries.
Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges | Inconel 601 Flanges
Resistance to carburization of Inconel 601 Long Weld Neck Flanges is good, also resistant to carbon nitriding conditions. Inconel 601 Nippon Flanges is highly resistant to carburization, along with has metallurgical stability and good creep rupture strength. Meanwhile, these Inconel 601 Lap Joint Flanges are also being offered in different sizes and shapes to our customers.
Inconel 601 Pipe Flanges Specifications |
||
| Specifications | : | ASTM B564 / ASME SB564 |
| Size | : | 1/2″NB TO 60″NB |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 601#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
Inconel Alloy 601 Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.00 max | 0.50 max | 0.015max | 1.00 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
Inconel 601 Plate Flanges Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Equivalent Grades for 601 Inconel Industrial Pipe Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
Alloy 601 Flanges Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Sheet Plates
Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment.
The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on.
Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters.These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.
Inconel 601 Double Ferrule Pipe Fittings has outstanding resistance to high temperature oxidation, where Annealed Heat Treatment can be conducted up to 2100 Degree F (1150 Degree C).
In the power – generation field, these Alloy 601 Compression Fittings is used for super – heater tube supports, ash – handling systems, and grid barriers.Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe FittingsAlloy 601 Compression Pipe Fittings is more difficult to machine than stainless steel 304, which is also used for igniters and diffuser assembles in gas turbines for aerospace applications.
The oxidation of these Alloy 601 Ferrule Pipe Fittings was performed in air, in the temperature range 1000 Degree C – 1150 Degree C, during 90 h, where the kinetic results show that the parabolic behavior is always followed in this temperature rangeInconel 601 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B166 ASME SB 166Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 6010 Psi, 10000 PsiThreads:NPT , BSPT, BSPPInconel 601 Pipe Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6010.10 max1.00 max0.50 max0.015max1.00 maxBalance58.0 – 63.021.0 – 25.0Alloy 601 Accessories Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6018.1 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530 %Equivalent Grades for 601 Inconel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23FeAlloy 601 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Round Bars, which is a Nickel – Chromium alloy that offers good heat and corrosion resistance.
The weld fillers developed for RA 602 can also provide a weld which is stronger and more oxidation resistant than Inconel 601 Square Bars base metal.
Inconel 601 Flat Bars is a solid solution nickel chromium alloy for high temperature heat resistance.
Inconel 601 Threaded Bars is either annealed at around 2000 Degree F or solution treated at around 2100 Degree F, both followed by air cooling.Chemical – processing applications for Inconel 601 Hollow Bars include process heaters, condenser tubes in sour – water strippers, and insulating cans in ammonia reformers.
Thanks to this unique composition, Inconel 601 Hexagonal Bars is popular in a number of major global industries including: Pollution control, Power generation and Aerospace.
Inconel 601 Triangular Bars is a Nickel – Chromium – iron corrosion and heat resistant alloy, which is often used for insulating cans in ammonia reformers and catalyst support grids used in nitric acid production.Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round Bars | Inconel 601 Round BarsHigh – speed operations such as grinding, turning or milling, are performed in Inconel 601 Bars using water – based coolants.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Inconel 625 Flanges, which has excellent features such as precise dimensions, durable built, perfect finish, and more.
Inconel 625 Slip-On Raised Flanges (UNS N06625) is good for seawater applications and is oxidation resistance along with having excellent weldability and braze–ability.
The ability of Inconel 625 Threaded Flanges to withstand high stress and a wide range of temperatures, both in and out of the water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.Inconel 625 Weld Neck Flanges has outstanding resistance to pitting, crevice corrosion, and inter-crystalline corrosion.
Inconel 625 Blind Flanges is resistant to seawater, in both flowing and stagnant conditions, and under fouling.
Meanwhile, these Inconel 625 Socket Weld Flanges are also being offered in different sizes and shapes to our customers.
Applications of Inconel 625 Lap Joint Flanges include and are not limited to seawater applications, chemical processing, nuclear, and aerospace.Inconel 625 Flanges | Inconel 625 Flanges | Inconel 625 Flanges | Inconel 625 Flanges | Inconel 625 Flanges | Inconel 625 Flanges | Inconel 625 FlangesPotential applications of Inconel 625 Ring Joint Type Flanges are springs, seals, electrical cable connectors, bellows for submerged controls, fasteners, oceanographic instrument components and flexure devices.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 601 Threaded Forged Fittings, which are extensively demanded in residential, commercial and industrial sectors.
These Inconel 601 Forged Threaded Elbow (UNS N06601) are used in gas-turbine components and others.
Inconel 601 Forged Threaded Tee Fittings is perfect for applications that demand resistance to heat and corrosion.
Heavy lubricants in these Inconel 601 Forged Threaded Cross are used for tapping, drilling, boring, or broaching.
Inconel 601 Forged Threaded Cap is not suggested for use in strongly reducing, sulfur bearing environments.
These Inconel 601 Forged Threaded Fittings has highly resistant to oxidation through 2200 Degree F.Inconel 601 Forged Threaded Coupling has high mechanical strength, and is readily formed, machined, and welded.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 601 Tube to Union Fittings, which are widely applicable for different purposes in different industries.
Inconel 601 Tube Fittings has good hot corrosion resistance under oxidizing conditions, which further offers exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point.
Inconel 601 Ferrule Fittings has good resistance to aqueous corrosion and stands out due to its resistance to high temperature oxidation.
Inconel 601 Double Ferrule Fittings has been successfully used in the following applications, such as copper brazing, annealing and sintering muffles and retorts.Inconel 601 Compression Tube Fittings is also is useful for chemical process equipment such as combustor components, process heaters, and condenser tubes.
Alloy 601 Tube Fittings also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, welded and machined.
Alloy 601 Ferrule Fittings is not age – harden able and is only strengthened by cold working, and is often used in fabricated combustion chambers.
