AI Products 

Why Industrial Facilities Choose Epoxy Flooring

concrete grinding
Why Industrial Facilities Choose Epoxy Flooring

The flooring chosen for an industrial building is critical. You need a floor that can withstand traffic as well as any environmental dangers that the workplace may bring. Flooring failure may cost thousands of dollars and put your employees and the general public at risk.

Concrete flooring is commonly used in industrial structures. Industrial floor coatings concrete can be treated in a variety of ways, or they can be improved with other flooring technologies. Polished concrete was one of the most popular industrial flooring options for many years.

Nonetheless, as time has passed, so has flooring technology.

Polished concrete is no longer deemed acceptable for all industrial environments. Its slick smoothness might be hazardous to one's safety. Furthermore, it is susceptible to cracking and moisture intrusion. Thankfully, you can improve the protection of your current concrete floor.

Industrial epoxy concrete coatings Brings Your Existing Industrial Flooring to the Next Level

In a couple of hours, you may transform your existing concrete into a trendy epoxy floor system.

Most complete concrete floors may be transformed into epoxy floors with a heavy layer of epoxy coating - two millimeters or more. The epoxy method consists of two coatings, epoxy resin and a polyamine hardener, which must cure after application.

After that, you may enjoy the benefits of epoxy.

Consider the following reasons why so many industrial establishments are switching to Industrial epoxy concrete coatings for their operations:

  1. An Epoxy Floor Lasts for the Long Term

In low activity areas, your epoxy floor may be expected to endure up to 30 years. Even in heavy duty industrial and commercial establishments, with regular maintenance, it may last for more than 20 years. Most cleaning and maintenance tasks take only a few minutes and will not interfere with your day-to-day operations.

  1. Epoxy Flooring is Cost-Effective

Although epoxy can usually be placed over existing flooring, you may save thousands of dollars on flooring repairs. This may save you from having to repair a concrete slab that would collapse in a matter of years if left exposed.

  1. Epoxy Flooring Handles Industrial Hazards

Epoxy is immune to cracking, which is a common issue with concrete, and it is resistant to abrasion, corrosion, temperature extremes, and chemical spills. Despite the importance of removing spills as soon as possible, common industrial occurrences will not destroy epoxy floors.

  1. Epoxy Flooring is Shock Resistant

The high level of shock resistance of Industrial epoxy concrete coatings distinguishes it from concrete. Consider the following scenario: a large piece of equipment, such as a forklift, falls to the ground. Concrete breaks quickly under heavy shocks, whereas epoxy is unlikely to be harmed.

  1. Epoxy is an Effective Sealant

Epoxy bonds to the existing surface, forming a tough, membrane-like coating. The new surface repels stains and hinders the appearance of superficial imperfections in the concrete. Water also does not sink into the concrete base, increasing flood resistance.

  1. Epoxy is about Three Times Stronger Than Concrete

Concrete can support around 3,000 pounds of load per square inch on its own. You can increase that to an incredible 10,000 pounds per square inch with the right epoxy flooring. This translates to some of the highest compressive strength available in industrial flooring.

concrete grinding
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more