logo
logo
Sign in

How to Begin Sewing using your sewing machine

avatar
Online Sewing Machine
How to Begin Sewing using your sewing machine

The handle should be turned (balance wheel) towards you and place the needle into the fabric. Then, start giving pressure to the pedal on your foot. Gradually increase the pressure. Make use of your hands to gently move the fabric.


The manual for your sewing machine will include a diagram of the various types of stitches you can make with the machine. It's recommended to create the stitches in a sample and save it so you can have a ready reckoner whenever you need to create some decorative stitches. Most domestic machines have them on the display.


The general rules to follow when starting the machine include: the following

  • Before you begin, make sure that the pressure foot is in place that is holding the fabric.
  • Do not run the machine without a clean cloth and with feet that are pressured down.
  • Always run the machine with the cloth, needle and threaded using the top thread and bobbin
  • Always rotate the handwheel toward your direction.
  • Don't pull the fabric during sewing. Pressure feet move the fabric forward. If it doesn't, it is a sign of something not right. It is possible to manipulate and steer the fabric when it comes to specific types of fabric, however, the movement should be fluid.
  • If your fabric becomes stuck while sewing, stop sewing by removing the foot from the pedal, and then gently rotate the handwheel towards you. It is likely that this will free the fabric.
  • Carefully handle the fabric. Be sure to keep the whole fabric on the table of your sewing machine If it hangs when you sew, there might be snags, puckers and damaged to the fabric.
  • Keep a constant pace of the bike.
  • Don't operate the pedal unless the cloth is placed in the machine underneath the needle. The thread could catch in the bobbin.
  • Check that your device is stored in an area with enough lighting.
  • To turn the corner turn the fabric by pivoting it with the needle in the fabric. This will ensure that you don't be able to miss any stitches.
  • Once you're done, lift the needle until it reaches the highest point, grab the lever to pressure the foot and then gently take off the fabric. The thread can be cut by using the thread cutter on the machine if available. The thread is then taken to the side on the foot that is pressure.
  • Do not drop liquid or water onto your machine, and make sure you ensure that it is covered throughout the day.
  • After sewing is finished be sure to turn off the power. However, such issues you won't find with lx3817 brother.


Be familiar with the following as well.


collect
0
avatar
Online Sewing Machine
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more