The first step to troubleshoot is to verify the status of the Drivers for Printers. Check to see if you’ve installed the most recent or compatible edition of Epson Printer Drivers. Read the full article here How To Fix Epson Printer Isn’t Printing Problem?
Epson printer Error Code 0x97 may be a warning once there’s a drag with the internal hardware.
It can be caused by motherboard failure or different interior components.
once this error happens, it happens suddenly and should lead for your printer to show off or stop printing.
a way to search out is making an attempt tested troubleshoots.
turn on-off power and disconnect.Unplug all connected cables.Unplug USB drivers.Remove all printer cartridges.Still turned off, move power to release all remaining current within the printer.Plug in all cables and USB.
turn the power on.See if the error message remains.If the error persists, still the following technique.Unplug and plugin (2)Turn off the Epson printer and disconnect.Disconnect all cables and USB.Wait for 5 minutes till the printer cools down.Press and hold the power button for 60 seconds.
Epson Error Code 0x97 is a kind of warning that occurs when you face any kind of internal hardware issue in your Epson printer.
This error is caused due to multiple reasons such as motherboard failure or any other internal component failure.
Possibly when some time did not focus on the use of a work to a printer then it shows the quick out of order or Epson Error Code 0x97.
While it arrives as it is to internal fixtures effect in Epson Components, therefore the Printer error code grants you a platform, wherever you can call +1-888-480-0288 by USA and UK with online support.
Investigating Methods for fix Error Code 0x97: 1.
Disengage Everything from the Printer Before you continue, you need to offset any print assignment and take all paper jams from your printer.
They incorporate USB lines, link wires, and force ropes, just as ink cartridges.
Then, at that point, plug back everything, including reinstalling the Epson ink cartridges into their particular openings.
Permit your printer to rest for around five minutes before you continue.
Keep squeezing and holding the Power button while you reconnect each link back.