When it comes to Brother printer, it becomes imperative that you clean the paper pick up roller occasionally to avoid any malfunctions or troubles.
This will ensure that you do not face paper jam troubles in the future.
If the pick-up rollers are correctly cleaned, then you can be rest assured that the papers will get feeded into the tray correctly and when the print command is given, it will come smoothly without getting stuck.
You can read this blog until the end and understand the cleaning procedure.
Sometimes it can also require a technical expert to help you with the same, and if you wish to avail that, you can always dial Brother Printer Customer Care number.
You must also get it serviced annually in order to avoid troubles in the future.The process to clean the Brother Printer Pick up roller:Switch off the Brother printer and remove the power cord from the main switchIf the paper flap, where you insert the papers is open, you need to close it and also close the paper support.Now pull out the paper tray from the machineTake a moist linen cloth and damp it with water and clean the Base Pad 1.If you have the printer with model number MFC-J680DW/MFC-J880DWMFC-J885DW, then you need to clean the Base Pad 2 as well.This is the photo bypass tray and wipes it with the same linen cloth.After cleaning it, take a dry cloth and wipe it on the base pad to soak the moistureNow again take a moist cloth and start rotating the paper pick up roller and clean it with the fabric.