Sign in

A Supply Memory Error HP Printer Message Displays How Do I Fix It

A Supply Memory Error HP Printer Message Displays How Do I Fix It

A message stating that I am experiencing an HP Printer Supply Memory Error appears on my screen when I am trying to print or scan anything on my HP printer. This happens when the metal contacts/chip on the toner cartridge are connected to the contacts in the printer. When the printer cannot find an installed toner cartridge, it will display an error message stating that the hp printer is experiencing a Supply Memory Error HP Printer. This can be very frustrating. It is strongly recommended that you ring the HP support number immediately since here the smartest techies are actively working around the clock. Read on to learn How Do I Fix HP Printer Supply Memory Error.

Why does HP Supplies Memory error appear?

Here are several factors that can lead to an HP Supplies Memory error:

  • Errors usually result from missing packages, paper jams, or protective strips that cannot be removed
  • This issue happens when the condensed metal in the toner cartridge does not bond with the condensed metal in the condensed metal in condensed metal.
  • Damaged plastic pieces are the motive for this toner
  • Due to the use of outdated printer software/firmware

The same problem may happen when the toner cartridge is replaced with a different one after it has been empty

Effective Solutions To Recover From HP Supplies Memory Error

An HP printer Supply memory error can occur when setting up a new cartridge or whenever the printer is on. It's a sign that the cartridge you installed cannot communicate with the printer. If you observe this error while setting up a new cartridge or while the printer is on, it's crucial to understand its cause. A better solution is to make sure the cartridge you put in is in harmony, otherwise, it can fire in minutes and can be a false alarm. When the error message Supply Memory Error HP Printer appears on your screen, please follow the step to fix it.

Reduce the number of packages or protective strips

As you are installing a new toner cartridge, you will see orange protective strips and plastic clips, which are designed to prevent damage to the cartridge during transport. It is required that all of these clips, as well as the protective strip across the drum, be removed before you install the new toner, otherwise, your printer will not be able to print. Clips are easy to spot and stick out like a sore thumb, the protective strip is on the side of the toner and has an orange ring that must be pulled to remove the strip

Squashed Metal contacts

A printer must have two tiny metal contacts that connect to the corresponding contacts on the toner cartridge for it to recognize the cartridge as having been installed. The two metal contact miniatures on the toner cartridge should be connected to each other with the corresponding contacts on the printer. The alloy of the metal contact miniature does not match the toner, nor does it match the printer, nor does it match the contact that has completed the circuit. To figure it out, remove the toner cartridge and you should see something that appears to be a microchip or two squares of metal. Visualize where these pieces would connect inside the printer and you will find their corresponding connectors inside the printer (make sure the printer is turned off and unplugged first). When you reinstall the toner if the two metal connectors seem squashed back, gently pull them forward (so as not to break them). They should now be able to connect correctly.

Broken plastic pieces

It is possible to damage the plastic gaps when wax inserts are placed on multiple sides. Toner might not stick to the printer's slots if wax inserts are placed on multiple sides. When a toner cartridge is damaged along with one of the sides, the plastic slots may break off, and the cartridge may not sit correctly inside a printer, and as with the previous cause of a supplies memory issue, the contacts will not connect properly, and  The only way to get rid of the source of this problem would be to replace the toner cartridge.

Out of date firmware/software

The HP printer manufacturer launches completely new printer software or firmware each time. Therefore, in the event that the printer software becomes outdated, Supply Memory Error HP Printer will occur. There is a good chance that your printer manufacturer will update your printer with new firmware or software when needed. If the firmware is out-of-date for any reason, you will receive an error message. Visit Google, type in [the model number of your printer] firmware, and download the most recent version. This can often solve many printer problems once it has been updated. You can find the latest firmware updates on HP's website. Transmission memory errors may also occur as a result of the installation of a remanufactured toner cartridge or obsolete information on the microchip of the capsules that are part of the toner cartridge. In this case, the printer firmware may send a message saying: Provide Memory Error. To resolve the problem HP Printer Supply Memory Error, replace the reman file. Then replace it.

Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more