You can print, copy, and scan documents with the HP Envy 4520 Setup. It features a 100-sheet input tray and the ability to print in Duplex and Borderless modes concurrently. It prints in black at a 9.5-page-per-minute rate and color at a 6.8-page-per-minute rate in black.
You may print at a resolution of 4800 x 1200 dots per inch with this printer (dpi). The maximum print size supported by this printer is 8.5 x 14 inches." Additionally, this printer has a scan resolution of 1200 x 2400 dpi, which is a really high resolution for a laser printer. According to the printer's 2.2 ratings, it features an "LCD with a single touchscreen." There are two ways to connect your HP Envy 4520 Setup to a computer: either a wired network or a wireless network.
Instructions for customizing an HP Envy 4520 in detail
- The following are the configuration methods for your HP Envy 4520 printer:
- Remove the HP Envy 4520 printer from its packaging and set it aside.
- Then, one by one, remove the printer's covers.
- Before beginning, ensure that your envy printer is close to a power outlet.
- A USB cable is required to connect the printer to the power outlet.
- You must first turn on the power outlet before you can turn on the printer.
- After turning on the printer and initiating printing, please navigate to the printer's settings.
- Following that, make the necessary changes to gain access to the cartridge slots.
- Replace the ink cartridges in the printer's designated locations.
- Fill the input tray of the printer with the desired number of sheets.
- Establish a wireless network between the computer and printer to facilitate the sharing of files and printing preferences.
- The appropriate driver software can be downloaded and installed from the manufacturer's website.
- Print a piece of paper to verify that the HP Envy 4520 setup is accurate.
HP Envy 4520 driver download and installation
HP printer drivers are essential to ensure that the printer functions properly. You can print with all advanced features enabled if your printer is equipped with a driver that is compatible with it. Regardless of the model of your HP printer, you must install the driver. The HP Envy 4520 driver for Windows and Mac is a simple download and installation process.
On your Windows PC, download and install the HP Envy 4520 driver.
The following instructions will guide you through the process of downloading and installing the HP Envy 4520 driver for Windows: Step 1: Download and save the HP Envy 4520 driver to the hard disc of your computer.
- On your computer, install the HP Envy 4520 driver for Windows.
- Please navigate to the location of the downloaded driver and double-click it.
- Following that, you may begin the driver installation procedure.
- It's as simple as running the setup application to install the driver.
- Ensure that you select the connectivity setup technique during the driver installation.
- Finally, but certainly not least, load paper into the printer and print a page.
HP Envy 4520 driver for Mac OS X is available for download.
- The steps below outline how to install the HP Envy 4520 Setup on a Mac:
- On your Mac computer, install the HP 4520 driver.
- After that, proceed with the installation procedure to get the driver up and running.
- Follow the wizard's instructions to install the driver.
- Ensure that the network configuration strategy is chosen during the envious driver's structure.
- Navigate to a file's location on your device.
- Finally, load paper into the HP Envy 4520's printer tray and print a file from your computer.
Configuration of the HP Envy 4520 Wireless Printer.
Create a wireless network for your HP Envy 4520 in a matter of minutes.
HP's Intelligent Application
- The following section contains instructions for configuring the HP Envy 4520's wifi:
- To begin the software installation process, download and activate the HP Smart App.
- Continue to follow the wizard's instructions.
- Following that, download, install, and launch the software.
- Modify the HP Smart App to reflect the appropriate changes.
- Utilize the USB cord to connect your Envy printer to the HP Smart App.
- Complete the procedure of configuring the wireless network.
Wireless Network Configuration Wizard
Follow these steps to configure your HP Envy 4520 Setup to connect to a wireless network:
- Navigate to the wireless network configurations for the printer.
- By clicking on the link, you'll be taken to the wifi configuration wizard.
- Your envy printer will provide a list of currently available wifi networks.
- Connect to your wifi network by following the wizard's instructions.
- Following that, complete the configuration of the HP Envy 4520 wireless network.
- Finally, a test document must be printed.