Best Pipe Fittings in India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Pipe Fittings, which has a high ductile – to – brittle impact transition temperature.

Therefore, successful forming and bending of our Brass Compression Pipe Fittings is aided by low forming speeds, edge preparation and preheating to 250 Degree F – 400 Degree F. Annealing of these Brass Compression Fittings, when necessary, have to be performed at 1550 Degree F – 1650 Degree F followed by rapid cool.

Welding of our Brass Ferrule Pipe Fittings may be accomplished by conventional methods, where pre – heating and post – heating to 300 Degree F – 600 Degree F is helpful.Austenitic weld fillers, such as these Brass Double Ferrule Pipe Fittings are generally suggested to maximize weld deposit ductility.

Our Brass Accessories is a Ferritic stainless steel formulated for primary forming into wrought products.

This Brass Compression Pipe Fittings is well established, which is typically furnished in the annealed (O) condition.

Our Brass Compression Fittings has a moderately high PREN relative to other wrought Ferritic stainless steels in the database.Brass Pipe Fittings | Brass Pipe Fittings | Brass Pipe Fittings | Brass Pipe Fittings | Brass Pipe Fittings | Brass Pipe FittingsThe lean 11 % nickel content of these Brass Ferrule Pipe Fittings is a key contributor to being cost effective and stable.

Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality SMO 254 Pipe Fittings, which gives better guaranteed corrosion resistance.

These SMO 254 Compression Pipe Fittings resists chloride environments and sulphide stress corrosion.

SMO 254 Compression Fittings is also roughly double the strength of standard austenitic stainless steels.

We recommend a maximum hot forming temperature of these SMO 254 Ferrule Pipe Fittings between the range of 2010 Degree F and 2100 Degree F (1100 Degree to 1150 Degree C).If the shape of the work piece is not compact, the edges of SMO 254 Double Ferrule Pipe Fittings may be significantly cooler than the bulk, and there is risk of cracking in the cooler regions.

These SMO 254 Accessories are somewhat more difficult to machine than the 300 series austenitic stainless steels.

Higher cutting forces in Alloy 254 Compression Pipe Fittings are required and more rapid tool wear is typical, where the high strength can pose problems.SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings  These Alloy 254 Ferrule Pipe Fittings is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation neither of brittle micro constituents, nor below -50 Degree C because of its ductile – to – brittle – transition.

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Hastelloy B3 Pipe Fittings, which has excellent resistance to pitting and stress corrosion cracking.

Hastelloy B3 Compression Pipe Fittings is a nickel – molybdenum – chromium super – alloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.

The high nickel and molybdenum contents make Hastelloy B3 Ferrule Pipe Fittings especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media.In addition, Hastelloy B3 Double Ferrule Pipe Fittings resists formation of grain boundary precipitates in the weld heat affected zone making it useful for most chemical processes in the as-welded condition.

The low carbon content of Hastelloy B3 Accessories minimizes carbide precipitation during welding to maintain corrosion resistance in as – welded structures.

Alloy B3 Compression Pipe Fittings is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process application in an as welded condition.Hastelloy B3 Pipe Fittings | Hastelloy B3 Pipe Fittings | Hastelloy B3 Pipe Fittings | Hastelloy B3 Pipe Fittings | Hastelloy B3 Pipe Fittings | Hastelloy B3 Pipe Fittings | Hastelloy B3 Pipe Fittings | Hastelloy B3 Pipe FittingsAlthough there are several variations of the Hastelloy nickel alloy, our Alloy B3 Ferrule Pipe Fittings is by far the most widely used.

Alloy B3 Double Ferrule Pipe Fittings is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas.Hastelloy B3 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B574 ASME SB 574Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 6000 Psi, 10000 PsiThreads:NPT , BSPT, BSPPHastelloy B3 Pipe Fittings Chemical CompositionGradeNiMoCrFeWMnCAlTiSiHastelloy B365.0 min28.51.51.53.0 max3.0 max0.01 max0.50 max0.2 max10 maxHastelloy B3 Accessories Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation9.2 g/cm31370 °C (2550 °F)Psi – 1,15,000 , MPa –760Psi – 52,000 , MPa – 35040%Equivalent Grades for Alloy B3 Pipe FittingsSTANDARDWERKSTOFF NR.UNSHastelloy B32.4600N010675Hastelloy Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.