logo
logo
Sign in

Costumers want for Washing Machine Repair - uaetechnician

avatar
Uaetechnician
Costumers want for Washing Machine Repair - uaetechnician

The drain pump is used to pump water from the Washing Machine Repair wash tub prior and during the spin cycle. It can be motor driven, belt driven, or even have an electric motor. If the drain pump is making a loud noise during or after the spin cycle, it could indicate that there is a problem or restriction.


How to inspect the motor and pump on a washing machine


  1. To locate the pump, unplug the washing machine. To verify the source of the noise, plug your washer back into the outlet and run a cycle. Be careful as you're now being exposed to electrical circuits and moving parts.
  2. If the noise emanating from your pump is confirmed, you should remove the inlet tube.
  3. You should inspect the impeller of the pump for any foreign objects or signs that could be causing the noises or causing damage. To ensure that the impeller isn't seized or worn, you should also try to manually turn it. You should remove any foreign objects that may be found around the pump.
  4. You will need a replacement motor if you notice any wear or damage or if your impeller is stuck. A front load washer often uses an electric drain pump. The motor could be worn or damaged, and a complete replacement pump is required.

popular blog - microsoft surface repair dubai


Your washer is not turning on or is dead.

  • This is usually caused by an off-balance or tripped switch due to an unbalanced load. This can be easily fixed by redistributing clothing. Our professionals can help you with any problems with your outlet or timer circuitry.

Your washing machine isn't spinning correctly or at all.

  • If clothes get soaked after a wash cycle ends, this could indicate that the washer is not spinning. It could indicate a defective lid switch, lid plunger, worn or damaged spin solenoid, damaged wires or bad timer contact.

There is no agitation.

  • You can have no agitation due to a worn belt, agitator assembly or wigwag plunger/lifter. You may also experience no agitation due to a bad internal contact, bad lid switch or malfunctioning pressure switch.

Excessive vibration.

  • You may notice vibrations from your washer. You could also blame worn damper pads and snubber pad.

Leakage in your washing machine

  • Leaks and similar damage could be caused by excess soap, loose hoses or drain hose clogs.

Water does not drain properly.

  • If your pump is defective, the drive belt worn, or the drain hose is clogged, water will remain in your drum. It could cause serious problems if it does not drain properly.

There is no cold water.

  • It is possible for the cold-water valve to be shut off, or it may have sediment buildup.

Spots can form from washing clothes.

  • Spots that don't come off with soap or water could be caused by transmission oil.

Soap gets left in clothes after washing.

  • Your clothes may have soap residue from a defective timer contact, or a sediment-clogged cold water valve.


collect
0
avatar
Uaetechnician
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more