logo
logo
Sign in

How To Replace The LCD Display Of Your Motorola Moto G (XT2115)

avatar
Nipa Sarker
How To Replace The LCD Display Of Your Motorola Moto G (XT2115)


Your Motorola Moto G (XT2115) is a great device and deserves to have the best LCD possible! If your current LCD looks dim or yellow, worn out, and cracked, this article will show you how to replace it.


Why replace the LCD of your phone?


Replacing the LCD of your Motorola Moto G (XT) is an easy and affordable way to get your phone looking and working like new.


LCDs are one of the most common parts to fail on phones. They can become scratched or damaged, which can cause them to stop working correctly. In some cases, the pixels on display might also become corrupted, making it difficult to see what's on the lcd screen replacement.



How to replace the LCD of your Motorola Moto G (XT2115)


The first step is to remove the back cover of your Motorola Moto G (XT2115). Next, use a paperclip for popping out the battery and SIM card. Then, remove the screws that hold the back cover in place.


Once the back cover is off, you can see the LCD. To replace it, remove the old LCD panel by gently prying it off with a fingernail or a tool such as a pinhead screwdriver. Be careful not to damage the adhesive that holds it in place.




What tools did I need for the job?


1. Start by removing the battery cover. Use a Phillips head screwdriver to remove the 4 screws that hold it in place. Be sure to take note of which way they are facing so you can replace them correctly when you reattach the cover later on. Once the battery cover is removed, you'll see the mainboard and LCD assembly. 

2. To remove the LCD assembly, use a Hammer to gently strike underneath one end of it until it pops out. Then use fine sandpaper to rub off any dirt, fingerprints, or other debris that may have accumulated on the surface over time. 

3. Carefully remove the old LCD and install the new one in its place using an adhesive removal tool if applicable and a Lint-free cloth. Reattach the battery cover and screws, then test your device by turning it on and looking at the screen Cell phone parts .


What did the replacement process entail?


To replace the LCD on a Motorola Moto G (XT) phone, you will first need to determine what model of phone you have. After that, follow these steps:


1. Turn off your phone and connect it to the charger.

2. Open the battery cover by pressing on the two circles near the top and sides of the battery.

3. Remove the old screen by gently pulling it out from its connector.

4. Replace the new screen by placing it in its connector and pressing it down until it clicks into place.

5. Replace the battery cover and turn on your phone.


Conclusion


 Motorola Moto G (XT) displays an error message or black screen. It may be time to replace the LCD. This guide will show you how to do that and help you get your phone back up and running in no time. Follow the steps closely, so you don't accidentally damage your phone further.


collect
0
avatar
Nipa Sarker
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more