The problems of concealing grouting and rough materials can be overcome. Coating paper, if precisely applied, will grow over and cover the rough spots and the consequence could be finished with a heavy or stamped wallpaper. This process also relates to walls developed of concrete blocks. If you should be developing with brick or cement block and realize that you wish to wallpaper specific walls, question your contractors to apply the mortar so that you have a good flat work surface, rather than raking out the joints. With present walls, the secret is in preparing.
The fresh surface. These are the various tools you'll need An extended desk or bench, a trough, sponge or foam substance applicator, scissors, smooth comb for removing picture onto wall, a ruler, plumb range, blade for cutting. A color sealer is applied to dry any water from the wall, then the latex based picture fluid size. A effectively soaked pre-pasted background coating will soon be only ample to ease the size and bond the lining strongly to the wall therefore that after background is pasted around, it won't destroy in just about any way. The exact same concept may even. قیمت بلوک سیمانی
Be used if you should be papering around rough-caste walls (walls that have been plastered and raked or scrolled upon when wet). If your brick wall posseses an excessively rough and increased floor it must be plastered around prior to wall-papering. Here is how it's done:- Prior to start taking care of an absorbent raw wall, you're first faltering step is to close and size the wall. Fur it with a color sealer and keep to dried overnight. Next use a latex centered picture water measurement; that is particularly excellent on absorbent surfaces. That requires about one hour to dry.
If time is short you can apply two coats leaving an hour between layers, rather than the over- night sealer. Apply pre-pasted coating paper. Bathe it in a trough to soften and move out to arm's length. Flip around and back half-way, building pleats to the end of the roll. Holding the top little bit of report in one give, and pleats in the other, grow the initial pleat across the wall and trim out with sponge. Expand next fold and trim and so to the end of the roll. To report about a large part, keep 25 mm (one inch) overlap and "butt" the adjacent.
