Characteristics and Advantages of Stainless Steel 304L Pipes

How to identify 304 stainless steel plate?1.

You can use a potion that is specially tested for stainless steel, such as 304 stainless steel.

For example, the 201 stainless steel plate will instantly turn dark brown-red after the potion test, the 202 stainless steel plate will turn to light brown-red within 5 seconds after the potion test, and the 301 stainless steel plate will turn into a light brick red within 1 to 2 minutes after the potion test.

Use a special magnet to identify the 304 stainless steel plate.

You can also find relevant professionals to help in the identification, you can judge the authenticity of the 304 stainless steel plate from the surface color and smoothness of the plate.The difference between 304 and 304L:1.

Chemical compositionThe main components of 304 stainless steel and 304L stainless steel are both 18% chromium (Cr) and 8% nickel (Ni); their main difference is that 304L stainless steel is a low-carbon steel, 304L contains less carbon than 304, and 304L stainless steel contains The carbon content is less than 0.03; and the carbon content of 304 is less than 0.08.

Sachiya Steel International is one of the prominent exporter & wholesaler of Stainless Steel 304L Screw, is the lower carbon version of the alloy.

Stainless Steel 304L Hex Head Screws was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).

Stainless Steel 304L Socket Head Cap Screws does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid.Stainless Steel 304L Socket Set Screws should be considered for applications requiring intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C), or for welding under conditions which prevent a post – weld anneal.

The high temperature oxidation resistance of Stainless Steel 304L Anchor Screws is similar to that of other stainless steels.

Stainless Steel 304L Blind Rivet Screws cannot be hardened by heat treatment, only by cold working.Stainless Steel 304L Concrete Screws can be easily welded and processed by standard shop fabrication practices.

Often in many product forms, the grain size and carbon content of Stainless Steel 304L Threaded Screws can meet excellent requirements of clients.

Sachiya Steel International is renowned Manufacture And Exporter of high quality Stainless Steel 304L Angle, which is an array of stainless steel structures manufactured by us.

Stainless Steel 304L Angle are manufactured by using state of art welding equipment and also machined to required parameters under strict observations and supervision of technically strong supervisors.

The welding of Stainless Steel 304L C-Channel is calculated and supports are provided at proper positions to minimize the distortions while fabricating these components.Our Stainless Steel 304L H-Beam is then stress relieved to remove all the residual stresses induced during the welding process.

These industrial components of Stainless Steel 304L I-Beam call for very deep and thorough knowledge on all the fronts of the products such as: planning, execution, procurement, fabrication, machining, handling, Inspection and delivery.

All developments and process layouts of our Stainless Steel 304L T-Beam are formulated keeping in mind various parameters and requirements of the components.Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle| Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle Few of the industries served Stainless Steel 304L Chain are Energy, Machine Building, Power, Glass, traction Motors for Railways, etc.

We present you a vast array of locomotive parts made by these SS 304L Angle that are widely demanded and appreciated in the locomotive industry for their reliable and efficient operations.

Sachiya Steel International is one of the specialized manufacturer & Exporter of Stainless Steel 304L Tube to Female Pipes, which is readily fabricated by standard commercial procedures.

In comparison to carbon steel, Stainless Steel 304L Tube Fittings are tougher and tend to work harden rapidly.

Stainless Steel 304L Compression Pipe Fittings is a heat resisting stainless steel by means of high resistance to oxidation scaling and has great strength at high temperatures.Stainless Steel 304L Ferrule Pipe Fittings is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 1200 Degree F. Stainless Steel 304L Double Ferrule Pipe Fittings can be welded using all of the common welding processes, which is combined with better creep properties at temperature and is very tough and ductile.

Stainless Steel 304L Female Connector Pipe Fittings has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing Sulphur gases are not present.Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female Pipes | Stainless Steel 304L Tube to Female PipesWith its high chromium content, Alloy 304L Compression Fittings offers good corrosion resistance to increase high temperature properties.

The high chromium and nickel contents of Grade 304L Female Pipe Fittings provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys.

SS 304L Compression Pipe Fittings is utilized for ease of fabrication, where in most instances the grain size and carbon content of the plate can meet both excellent requirements.Stainless Steel 304L Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 304L Stainless Steel Tube to Female Pipes Chemical Composition GradeCMnSiPSCrMoNiN304L0.030 max2.0 max0.75 max0.0450.03018.0-20.0–8.0-12.00.10 Stainless Steel 304L Tube to Female Pipes Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardness Rockwell B (HR B) maxHardness Brinell (HB) max304L4851704092201 Stainless Steel 304L Tube to Female Pipes Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/°C)Thermal Conductivity (W/m.K)Specific Heat 0-100°C (J/kg.K)Electrical Resistivity (n.m)0-100°C0-315°C0-538°Cat 100°Cat 500°C304L800019317.217.818.416.221.5500720 Equivalent Grades for 304L Stainless Steel Tube to Female Pipes AISI Grade EquivalentJIS EquivalentStainless Steel NotationEN/DIN Numerical EquivalentUNSdesignationEN/DIN Symbolical EquivalentAISI 304LSUS304LSS 304LEN 1.4307UNS S30403X2CrNi18-9 SS 304L Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304L Round Bar, which is readily fabricated by standard commercial procedures.

In comparison to carbon steel, Stainless steel 304L Square Bars are tougher and tend to work harden rapidly.

Stainless steel 304L Flat Bars are a heat resisting stainless steel with high resistance to oxidation scaling and has high strength at elevated temperatures.

Stainless steel 304L Threaded Bars can be welded using all of the common welding processes.

Stainless steel 304L Hollow Bars are combined with better creep properties at temperature and are very tough and ductile.Stainless steel 304L Hexagonal Bars has good resistance to oxidation and may be used in continuous service up to 1140 Degree C provided reducing Sulphur gases are not present.

Stainless steel 304L Triangular Bars is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000 Degree F. With its high chromium content, Stainless steel 304L Bars offer good corrosion resistance to increase high temperature properties.Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round Bar | Stainless Steel 304L Round BarStainless steel 304L Rods’ high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys.