logo
logo
AI Products 

Why Use A Dry-Block Calibrator For Temperature Calibration?

avatar
Jordan Smith
Why Use A Dry-Block Calibrator For Temperature Calibration?

 Temperature calibration is an important part of the quality control process for any laboratory. It ensures that your equipment is accurately measuring temperatures, which in turn ensures that your data is reliable and accurate. 

But there are many different types of thermometers available for temperature calibration—from infrared and laser sensors to liquid-filled bulbs and everything in between! So which one should you use? 

Dry-Block Calibrator are a good choice because they're easy to use and provide accurate results every time. 

In this article, we'll explain why Dry-Block Calibrator can be better than other types of thermometers for temperature calibration purposes.

Accurate and Reliable Results 

Dry-Block Calibrator are used to calibrate at the same temperature as the process.

This is important because accurate and reliable results can only be achieved when you're calibrating at the same temperature as your process.

You see if you're using an electronic temperature controller to control a heater or cooler in your system, then it makes sense that any calibration should occur at the same time as when those devices are being used during the normal operation of your equipment.

Easy to Use and Maintain

Dry-Block Calibrator are easy to use and maintain. They do not require any water, so maintenance is minimal. When you're ready for calibration, simply wipe down the surface of your dry-block calibrator with a soft cloth or sponge and you're good to go!

Dry-Block Calibrator don't have to be recalibrated every year like wet baths do; this can save you time and money by eliminating unnecessary costs associated with annual calibration requirements. 

Additionally, because they are portable devices that don't use any liquid media (such as water), they're great for transferring from one location or facility where they will be used regularly into another facility where they may only need occasional use during emergency situations such as power outages or equipment failures due to high temperatures reaching unsafe levels.

 

Dry-Block Calibrator


 

Time and Cost Savings 

You're probably familiar with calibration wafers, which are used to calibrate temperature instruments. They can be expensive and difficult to use, but Dry-Block Calibrator are an alternative solution that is much easier and more cost-effective.

Dry-Block Calibrator can be used on a wide range of instruments, including thermometers and thermocouples in both laboratory environments and industrial settings. 

There's no need to open up your instrument--just place the dry-block calibrator inside it! 

Compliance with Standards and Regulations

As the temperature of a system changes, so do the pressure and volume of the air inside. To ensure accurate readings, these factors must be accounted for when calibrating your equipment.

A dry-block calibrator does exactly that by replicating environmental conditions like humidity and barometric pressure in order to provide consistent results that meet industry standards.

Conclusion

In conclusion, if you are looking for a way to ensure that your temperature calibration is accurate and reliable, then a dry-block calibrator is the best option. 

Dry-Block Calibrator are easy to use and can be used for both manual and automatic temperature calibration procedures.

collect
0
avatar
Jordan Smith
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more