Sign in

Driveway Cleaning Tips | perthpowerwash.com.au

Driveway Cleaning Tips | perthpowerwash.com.au

Keeping your driveway cleaning can help maintain its look and keep it in good condition. But it can be challenging to get rid of stubborn stains that have been there for too long.

Driveways tend to accumulate dirt and mud from automobile tires, which hardens as it dries. This can make your home look untidy and out of place if left to sit for too long.


Sweeping the driveway before you use a hose is an excellent way to get rid of loose debris. It saves you a lot of time and water while making your driveway look neater and cleaner.

You can sweep your driveway using a broom that you use inside your house or a special outside broom that is designed for this purpose. You can also use a rake if you prefer, just be sure that it is able to handle large items like small branches and leaves.

Once you have gotten the surface dirt out, you can move on to more difficult issues such as oil and grease stains. This can include things like old auto fluids, sidewalk chalk, contractor markings and even spray paint.

In order to remove these stains, you will need to make a cleaning solution that will work for your particular driveway. This can involve washing soda or baking soda mixed with water.


Pressure washing your driveway can be a very effective way to remove stains and clean the surface. Be sure to read the instructions for your specific pressure washer before you start.

You should start at the high end of your drive and work your way down, so that water will run away from the area you are cleaning. This helps avoid polluting the nearby streams with your driveway's dirty water.

Oil and grease stains can be removed with a heavy-duty detergent like trisodium phosphate (TSP). Mix a cup of the solution with 3.8 litres of hot water. Apply the solution to your driveway and let it stand for at least 15 minutes before scrubbing with a stiff-bristle brush.

You can also use bleach to brighten up driveway stains. Just make sure that you dilute it correctly and apply it to the concrete carefully.


If you're using a pressure washer, you may want to rinse the driveway after you've applied the detergent and scrubbed it. This will remove any leftover cleaner and soap suds, which can be tough to remove from the surface.

You can use a high-pressure nozzle to rinse your driveway, or you can set the pressure washer to its low-pressure rinsing mode. You can also buy a rotary nozzle, which pulses and rotates the water flow to more effectively clean dirt off the concrete.

The first thing you'll need to do is find the pressure washer's spray wand and attach it to the hose. Next, connect the garden hose to it and choose a nozzle for the job at hand.


When it comes to driveway pressure cleaning, it's important to dry the surface before sealing. This will help prevent the stains from soaking in and make it easier to remove them when it's time for a sealant.

One of the best ways to get rid of oil stains is to use a solution of bleach and water (about 1 cup of bleach per gallon of water). Be sure to wear gloves when using this technique, as it's a very strong product.

Once your driveway is clean, you should be able to use it again without worry of stains. However, if you're still having issues, you should contact a professional.

A professional driveway cleaner can help you save money by preventing costly repairs and extending the life of your pavement. They can also treat weeds and remove stains from cracks.

Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more