Troubleshooting Common Pool Cleaning Issues: Expert Advice for a Pristine Pool

Pool maintenance is a big job. It requires a lot of time and effort, but it's worth it to have the cleanest pool possible. You might not be able to control what happens in your pool, but you can manage with the help of pool cleaners in Melbourne and respond to problems that arise.

This article will guide you through common issues that cause trouble for many people who own pools—and point out ways to avoid them or fix them if they arise.

Clogged filters

You may have heard the term "filter," but you're not sure what it means or how to clean one. Filters are important components of your pool's filtration system, and they need to be cleaned regularly to ensure that your water is safe and clear.

There are several types of filters available on the market today: sand filters (the most common), DE (diatomaceous earth), and cartridge filters being among them. They all serve the same purpose; to remove dirt particles from swimming pool water; but each type requires different care methods when it comes time for cleaning them out after use throughout the seasons.

Cloudy water

If you've noticed cloudy water and/or algae growth in your pool, it's important to act immediately. Cloudy water is usually caused by an imbalance of chemicals or minerals in the water that has allowed bacteria to grow.

To fix this problem, test the pH level of your pool with a professional pH testing kit. If necessary, use an appropriate acid or alkali treatment for adjusting pH levels.

Fungus or algae growth

If the water in your pool has turned green and cloudy, there are two main culprits: algae and fungus. These organisms can grow quickly in pools, especially if they're not properly maintained or kept clean.

Algae is a type of plant that grows on surfaces like rocks and windowsills and it's actually what makes up most of the world's oxygen supply!

Algae in pools are usually harmless unless it starts to get out of control, at this point, it becomes unsightly and may lead to more serious problems such as skin irritation for swimmers who come into contact with it.

Filters

Filters should be replaced regularly, and pool cleaners Melbourne will let you know when this is necessary by displaying an error code on its display panel (if it has one), or by not moving at all when you try to activate it in the water.

It's also important for your filter to be cleaned and sanitised regularly, especially if there has been algae growth in your pool recently or other contaminants could clog up your filter’s pores over time.

Pool pump

If you're having trouble with your pool pump, there are a few things to check. First, clean the filter and make sure there's no debris in it. This can stop water from flowing through the filter properly and cause problems with your system. Next, check if there's any damage to the impeller.

If it looks OK but still isn't working well enough for your needs, then you might need to replace it entirely--or at least get a new one made by an expert who knows what they're doing so they don't break easily again!

Another thing worth checking is whether or not something is wrong with your pressure switch; this device tells your motor how much pressure there is in its pipes so it knows when they're full enough or empty enough so as not to waste energy unnecessarily while still keeping everything flowing smoothly throughout its entire cycle without getting clogged up by dirt/debris floating around inside them all day long."

Water chemistry

When it comes to pool maintenance, the most important factor is water chemistry. If you don't have the right balance of chemicals in your pool, it can lead to damage and costly repairs. You should test your water regularly and adjust as needed based on what tests show.

The first step towards maintaining proper chemical levels is testing them periodically so that you know where they stand before making any adjustments.

Additives

Additives are chemicals added to water that help it stay clean and healthy. Some of the most common additives include:

• Algaecide (for algae control)
• pH adjuster (to balance pH levels)
• Stain remover (to remove stains on pools)

How often you need to add these products depends on the type of pool you have, how much use it gets, and what kind of water chemistry you're trying to maintain.

For example, if your pool has an automatic chlorine feeder and an automatic floater skimmer that keeps debris from collecting at the bottom of your liner then all you may need is a good shock treatment once every few weeks. If not then consider adding some algaecide every week or so depending on how much algae grows in between treatments.

Scummy surface

Scum is a layer of organic material that collects on pool surfaces. The most common form of scum is algae, but it can also be bacteria or other organic matter. Scum appears most often in pools with poor circulation and filtration systems, which means that you'll see it more often during hot summer months when there's less wind to keep the water moving around your pool.

Scum on your surface can make your pool look dirty and uninviting, but there are some easy ways to remove it from your water:

• Use a net or skimmer to scoop out as much scum as possible before further cleaning your surface; this will help prevent wasting time trying to scrub off something that's already gone!
• Cleaning chemicals like chlorine (or bromine) will kill off most types of algae growths within 24 hours if left undisturbed overnight - just remember not to add too much because this could cause other issues later down the road...

Conclusion

We hope our tips have helped you get your pool back in shape. If you have any questions or concerns about cleaning your pool, search for experienced pool cleaners in Melbourne or feel free to contact us at We're happy to help!

Source: Troubleshooting Common Pool Cleaning Issues: Expert Advice for a Pristine Pool