Organic fertilizer production equipment is widely used and practical, and the fertilizers produced can be quickly absorbed by crops. Organic fertilizer equipment is now more than the equipment for green agriculture, because they are all focusing on environmental protection and circular development, and want to treat waste green and pollution-free, while organic fertilizer processing equipment does meet the above requirements, which is why organic fertilizer production equipment can be used as an environmental protection project, and where organic fertilizer production equipment can create benefits is to make livestock manure into organic fertilizer.
.jpg)
The maintenance of organic fertilizer production equipment mainly focuses on the following 8 aspects.
1. Pay attention to the normal operation of various parts of the machine.
2. Pay attention to checking the wear level of easily worn parts and always replace worn parts.
3. Check if the screw caps on each device are loose.
4. Bearings. The bearings of the crusher bear the full load of the machine, so good lubrication has a great impact on the bearing life. It directly affects the service life and operating rate of the machine. Therefore, it is required that the injected lubricating oil must be clean and the seal must be good. The main oil injection point of the machine is: a. rotating bearings; b. Roller bearings; c. All gears; d. Active bearings, sliding surfaces.
5. Newly installed wheels are prone to loosening and must be regularly inspected.
6. The bottom frame plane of the movable device should be cleaned of dust and other objects to prevent the movable bearing from moving on the bottom frame when the machine encounters materials that cannot be broken, which can lead to serious accidents.
7. If the bearing oil temperature rises, it should be stopped immediately to check the cause and eliminate it.
8. If there is any impact sound during the operation of the rotating gear, it should be immediately stopped for inspection and eliminated.
The development of the industry drives the improvement of economic level, which is a law of market development and an inevitable result. As the most important pillar of the agricultural machinery industry, organic fertilizer equipment has always been at the forefront of the industry. In recent years, with the support of high-tech, it has reached a higher level of technology. In fact, through analysis, it can be found that success is achieved by everyone working together, and it is gradually achieved through countless difficulties.
Rust is a problem often encountered by the organic fertilizer production equipment, especially in rainy days.
Although the machine is not exposed to rain, it will still find rust when it is used later.
Let's explain how to prevent the fertilizer facilities from rusting in rainy days.There is more rain in autumn.
In rainy season, people will store the organic fertilizer equipment in the designated place as usual, but when it is reused after rainy day, it will be found that the organic fertilizer equipment is rusty, some mechanical parts are aging, and some parts are wet.
They are not well preserved, easy to rust and shorten the service life.
The machine should be painted with antirust paint and stored in a ventilated and dry place.2.
There are many sawdust sources in many places, but the pile of sawdust brings great pressure to the environment, especially when the wind blows, the sawdust flying all over the sky has a great impact on the local environment.
The fermented sawdust can be used as nutrient soil ingredients for nursery stock, flower matrix, organic fertilizer, crude protein feed for low animals, etc.It is difficult to ferment in natural accumulation and the fermentation time is very long.
Using Huaqiang organic fertilizer production equipment can realize industrial assembly line processing, and sawdust can be fermented in about 20 days.
Mix and dilute the fermentation agent with rice bran or wheat bran, stir evenly for standby.3.
It is very important to control the moisture content of sawdust by adjusting the moisture content of sawdust to about 65% and adding fresh feces or urea water during the adjustment.4.
Under normal temperature, the temperature of fermentation pile can reach above 50 ℃ on the second day and above 65-70 ℃ on the third day.
It is recommended that the indoor trough fermentation of manure is more environmentally friendly for organic fertilizer production.
From manure to organic fertilizer, the price has increased a hundred times, the key is to add fermentation bacteria to do fermentation treatment.
Here is a brief introduction to the method of making organic fertilizer from manure and straw.The organic fertilizer production process includes:Put the fresh manure cleaned from the farm on the same day into the fermentation workshop, add bacteria, synergists and other auxiliary materials, after heating, mixing and stirring, it becomes compost.
In the high temperature, the germs and insects in the feces will be killed, and the macromolecular proteins are decomposed into small molecular proteins that are beneficial to the absorption of crops.
The biological fermentation process can effectively prevent the generation of harmful and odorous gases such as hydrogen sulfide, amine gas and indole in the feces, and completely remove the odor in the feces.The compost is sold in bags after the second aging and decomposing, or directly made into granular fertilizer and stored.
Fermentation cycle of manure organic fertilizer production process is generally 7-10 days, so we recommend customers to use indoor fermentation tank for fermentation.
